2023 TOYOTA RAIZE Headlight

198
RAIZE_OM_General_BZ358E✽
: If equipped
4-3. Operating the lights and windshield wipers
Headlight switch
The headlights can be turned on automatically or manually.
Operation instructions
Moving the switch will turn the lights on and off, as specified below.
a : Turns off*
b
✽: Automatically turns on/
off the headlights, front position
lights, daytime running lights
✽( ➞ P. 199) and so on (when the
engine switch is “ON”)
c : Turns on the front posi-
tion lights, tail lights, license plate
lights, and instrument panel
lights
d : Turns on the lights speci-
fied above and the headlights
*Vehicles with daytime running light
system: the daytime running lights
turn on ( ➞P. 199)
Turn on high beam
a Switch to high beam when the
headlights are on
Return the lever to its original position
to return to low beam.
bHigh beam is turned on while you
pull the lever
Even if the headlights are off, the high
beam will turn on. Release the lever to
return to low beam or turn off high
beam.
1
2
4
3
KBRO430101E
1
2
KBRO430102E
RAIZE_OM_General_BZ358E.book 198 ページ ２０２２年５月１７日　火曜日　午後１時５９分

1994-3. Operating the lights and windshield wipers
RAIZE_OM_General_BZ358E✽
: If equipped
Driving
4
Follow me home system✽
This system allows the headlights to be turned on for 30 seconds when
the engine switch is turned off.
Pull the lever toward you and
release it with the light switch
in after turning the engine switch
off.
The lights are turned off in the following
situations.
⦁ The engine switch is turned to “ON”.
⦁ The light switch is turned on.
⦁ The light switch is pulled toward you
and then released.
⬛Daytime running light system✽
To make your vehicle more visible to ot her drivers during daytime driving, the
daytime running lights turn on automatically whenever the engine is started
and the parking brake is released wi th the headlight switch in the or
* position. (Illuminate brighter than the front position lights.) Daytime
running lights are not designed for use at night.
*When the front position lights are not turned on
⬛Light sensor✽
⚫Observe the following precautions.
Failure to do so may prevent the
automatic light on/off function from
working normally.
⦁ Avoid placing any item on the
sensor or pasting items that
would block the sensor on the
windshield
⦁ Do not spray liquid including
glass cleaner
KBRO430103E
KBRO430104E
Light sensor
(with solar radiation sensor)
RAIZE_OM_General_BZ358E.book 199 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2004-3. Operating the lights and windshield wipers
RAIZE_OM_General_BZ358E
✽: If equipped
⬛Automatic light off system
⚫While the lights are turned on, changi ng the engine switch from “ON” to
“ACC” or “OFF” will automatically turn off the lit lights.
⚫To turn the lights on again, turn “ON” the engine switch or move the head-
light switch to the position, and then move it to the or
position.
⬛Automatic light-off warning buzzer
When the headlights and tail lights are tu rned on with the engine switch set to
“ACC” or “OFF”, opening the driver’s door will cause the warning buzzer to
sound, letting the driver know that the lights have not been turned off.
⚫When the buzzer sounds , the warning message also appears for vehicles
with TFT color multi-information display. ( ➞P. 391)
⬛Power saving function
To prevent the battery from discharging, when the engine switch is set in “ACC”
or “OFF” and the headlights or tail lig hts are on, the power saving function is
activated and all lights are automatically turned off after about 10 minutes.
After light has been automatically turn ed off, perform any of the following
operations to cancel the power saving state and turn the lights back on.
⚫
When the engine switch is set to “ON”
⚫When the headlight switch is operated (However, the lights will turn off again
automatically after about 10 minutes)
⚫When one of the doors is opened or cl osed (However, the lights will automati-
cally turn off again after about 10 minutes)
⬛Customizations✽
You can change the timing of the headlight switch turning on and off automat-
ically at the position, etc.
(List of customizable features: ➞ P. 430)
NOTICE
⬛To prevent battery discharge
Do not leave the lights on for a long ti me with the engine stopped. Also, be
sure to turn off the lights when you leave the vehicle.
RAIZE_OM_General_BZ358E.book 200 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2024-3. Operating the lights and windshield wipers
RAIZE_OM_General_BZ358E
⬛Lighting conditions
▶Vehicles with front fog light switch
The headlights or the front po sition lights are turned on.
▶Vehicles with front and rear fog light switch
Front fog lights: The headlights or the front position lights are turned on.
Rear fog light: The front fog lights are turned on.
▶Vehicles with rear fog light switch
The headlights are turned on.
RAIZE_OM_General_BZ358E.book 202 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2294-5. Using the driving support systems
RAIZE_OM_General_BZ358E
Driving
4
⚫The projection range may be different depending on the vehicle and
road conditions.
⚫The projection range of the rear-view camera is limited. The camera
does not capture items located near both edges of the bumper or those
located under the bumper.
⚫Since the rear-view camera uses a special lens, the distance in the cam-
era view is different from the actual distance.
⚫The colors of the rear-view camera image may appear different from the
actual colors.
⚫Anything placed above the rear-view camera may not appear on the
monitor.
⬛Camera
The rear-view camera is installed at
the following location.
⚫Camera maintenance and care
If foreign objects, such as water dr oplets, snow, or dirt, are attached to
the camera, you cannot see a clear image. In this case, wash out dirt
from the camera with water, and wipe it off with a soft cloth dampened
with water. For persistent stains, wash it off with neutral detergent.
⚫The following situations may make it diff icult to view the screen, but they are
not the sign of malfunction.
⦁ Dark places (such as at night)
⦁ When the temperature near the lens is high or low
⦁ When water droplets are attached to th e rear-view camera or the humidity is
high (such as during rain)
⦁ When foreign objects (including dirt) are attached near the rear-view camera
⦁ When the sunlight or the headlight be am has directly shined on the lens of
the rear-view camera
KBRO460404
RAIZE_OM_General_BZ358E.book 229 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2866-1. Maintenance and care
RAIZE_OM_General_BZ358E
WARNING
✽: If equipped
⬛Exhaust pipes
Exhaust gases cause the exhaust pipes to become quite hot. When washing
the vehicle, be careful not to touch the hot exhaust pipes until they have
cooled sufficiently. Doing so may cause burns.
⬛Precautions regarding the headlight lens
Do not touch the headlight lens when turning on the light and immediately
after turning off the light. The head light lens become hot and may cause
burns.
⬛Blind Spot Monitor✽
Scratches on the rear bumper paint may prevent the system from working
normally. Contact your Toyota dealer.
⬛Waxing the aluminum wheels✽
Be careful not to have wax attached to the seat of the nut. It could loosen the
nut and cause the tire to come off, which may lead to an unforeseen accident.
It may also lead to excessive tighteni ng, causing the nuts and bolts to break or
the wheels to get damaged.
NOTICE
⬛To prevent paint deterioration and co rrosion on the body and components
(wheels, etc.)
⚫Wash the vehicle immediately in the following cases:
⦁ After driving near the sea coast
⦁ After driving on roads where the antifreezing agents are spread on
⦁ If coal tar or tree sap is present on the paint surface
⦁ If dead insects, insect droppings or bird droppings are present on the
paint surface
⦁ After driving in an area contaminated wi th soot, oily smoke, mine dust, iron
powder or chemical substances
⦁ If the vehicle becomes heavily soiled with dust or mud
⦁ If any organic solvent such as benzene or gasoline is spilled on the paint
surface
⚫If the paint is chipped or scrat ched, have it repaired immediately.
⚫To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
RAIZE_OM_General_BZ358E.book 286 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3526-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E✽
: If equipped
Replacing light bulbs
You can replace the bulbs listed below yourself. The difficulty of
replacing bulbs depends on the bulb. We recommend that you
replace the parts at your Toyota dealer because they may get dam-
aged.
Preparing light bulbs
Check the W (wattage) of the defective light bulb. ( ➞P. 428)
Bulb position
⬛Front
a Front turn signal/emergency flashers (vehicles with halogen head-
lights)
b Front fog lights
✽
cFront position lights (vehicles with halogen headlights)
d Headlight low beam (vehicles with halogen headlights)
e Headlight high beam (vehicles with halogen headlights)
12345KBRO620815E
RAIZE_OM_General_BZ358E.book 352 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3546-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Bulb replacement procedure
▶Vehicles with halogen headlights
Open the hood before you work on th e headlights, front position lights, or
front turn signal/emergency flashers.
⬛Headlight low beam/high beam (v ehicles with halogen headlights)
a Open the hood, and rotate the
socket to remove it
aLow beam (outside)
b High beam (inside)
b Hold down the claw and remove
the light bulb
12
KBRO620816N
KBRO620817N
RAIZE_OM_General_BZ358E.book 354 ページ ２０２２年５月１７日　火曜日　午後１時５９分