2023 TOYOTA RAIZE light

3546-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Bulb replacement procedure
▶Vehicles with halogen headlights
Open the hood before you work on th e headlights, front position lights, or
front turn signal/emergency flashers.
⬛Headlight low beam/high beam (v ehicles with halogen headlights)
a Open the hood, and rotate the
socket to remove it
aLow beam (outside)
b High beam (inside)
b Hold down the claw and remove
the light bulb
12
KBRO620816N
KBRO620817N
RAIZE_OM_General_BZ358E.book 354 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3556-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
cReplace and attach the light bulb
Align the light bulb’s claws (3 locations)
to the mounted area, insert it and
secure it in place.
aLow beam (outside)
b High beam (inside)
d Attach the socket
After attaching the socket, turn on the
headlights and make sure there is no
light leaking out.
12
KBRO620818N
KBRO620819N
RAIZE_OM_General_BZ358E.book 355 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3566-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
⬛Front turn signal/emergency flashers (vehicles with halogen
headlights)
a Open the hood, and rotate the
socket to remove it
b Remove the light bulb
c Attach the new light bulb, rotate
the socket and set it in place
KBRO620820N
KBRO620821N
KBRO620822N
RAIZE_OM_General_BZ358E.book 356 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3576-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
⬛Front position lights (vehicles with halogen headlights)
a Open the hood, and rotate the
socket to remove it
b Remove the light bulb
c Attach the new light bulb, rotate
the socket and set it in place
KBRO620823N
KBRO620824N
KBRO620825N
RAIZE_OM_General_BZ358E.book 357 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3586-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E✽
: If equipped
⬛Front fog lights✽
a Turn the steering wheel to the opposite side of the light bulb to be
replaced and change the direction of the tires
b Remove the clips (3 pcs) and pull
off the fender liner
c Hold down the claw and remove
the connector
d Rotate the light bulb and remove
it
KBRO620826N
KBRO620827N
KBRO620828N
RAIZE_OM_General_BZ358E.book 358 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3596-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
eReplace and attach the light bulb
Align the light bulb’s claws (3 locations)
to the mounted area, insert it and
secure it in place.
fAttach the connector
After attaching the connector, turn on
the front fog lights and make sure
there is no light leaking out.
gRestore the fender liner to the
original position and attach the
clips (3 pcs)
KBRO620829N
KBRO620830N
KBRO620831N
RAIZE_OM_General_BZ358E.book 359 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3606-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
⬛Back-up lights, rear turn signal/emergency flashers
a Open the back door and remove
the 2 bolts
b Pull the light body straight back
and disengage the fitting inside
aClip
b Guide
c Remove the socket
aBack-up lights
b Rear turn signal/emergency
flashers
d Remove the light bulb
aRear turn signal/emergency
flashers
b Back-up lights
KBRO620802
1
2
KBRO620803
2
1
KBRO620804
1
2
KBRO620805
RAIZE_OM_General_BZ358E.book 360 ページ ２０２２年５月１７日　火曜日　午後１時５９分

3616-3. Do-it-yourself maintenance
RAIZE_OM_General_BZ358E
Maintenance and care
6
eReplace and attach the bulb
aRear turn signal/emergency
flashers
b Back-up lights
f Attach the socket
aBack-up lights
b Rear turn signal/emergency
flashers
g Attach the light body
Align the clip ( a) on the light body with
the hole on the vehicle side, and push
the lamp body straight in so that the
guide ( b) fits into.
h Install the 2 bolts
1
2
KBRO620806
2
1
KBRO620807
1
2
KBRO620808
KBRO620809
RAIZE_OM_General_BZ358E.book 361 ページ ２０２２年５月１７日　火曜日　午後１時５９分