2023 MERCEDES-BENZ E CLASS COUPE Owners Manual

Always pay careful attention to the traPc
situation; do not rely on the maneuvering brake function alone.Be ready to brake.
System limits
Observe the system limits of the following func-
tions:
= Active Parking Assist (  page 217)
= 360° Camera (  page 209)
= Rear view camera (  page 207)
The maneuvering brake function is not available in
the following situations:
= on inclines

q Activating/deactivating maneuvering assis-
tance
Multimedia system:
4 © 5
Settings 5
Assistance
5 Camera & Parking
Switch Maneuvering Assistance on or oM.Vehicle towing instructions
The vehicle is not suitable for the use of tow bar
systems that are used for Oat towing or dinghy
towing, for example. Attaching and using tow bar
systems can result in damage to the vehicle. When you are towing a vehicle with tow bar sys-
tems, safe driving characteristics cannot be guar- anteed for the towing vehicle or the towed vehicle.
The vehicle-trailer combination may swerve from side to side.
Observe the following information:
= Permitted towing methods (  page 304)
= The notes on towing the vehicle with both
axles on the ground (  page 305)Driving and parking223

Notes on the instrument display and on-boardcomputer&WARNING Risk of accident if the instru-
ment display fails
If the instrument display has failed or is mal-
functioning, function restrictions in systems relevant to safety cannot be detected.
The operating safety of your vehicle may be
impaired.
Drive on carefully.Have the vehicle checked immediately at
a qualiNed specialist workshop.&WARNING Risk of distraction from infor-
mation systems and communications
equipment
If you operate information systems and com-
munication devices integrated in the vehicle
when driving, you could be distracted from the traPc situation. This could also cause you to
lose control of the vehicle.
Only operate this equipment when the
traPc situation permits.If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and traPc conditions and operate the
equipment with the vehicle stationary.*NOTE Mercedes-AMG vehiclesObserve the notes in the Supplement.
You could otherwise fail to recognize
dangers.
You must observe the legal requirements for the
country in which you are currently driving when
operating the on-board computer.
The on-board computer shows only display mes-
sages and warnings from speciNc systems on the
instrument display. You must therefore ensure
that your vehicle is always safe to operate.
If the operating safety of your vehicle is impaired,
park the vehicle immediately and in accordance
with the traPc conditions. Contact a qualiNed
specialist workshop.
224Instrument display and on-board computer

Overview of instrument display1SpeedometerThe segments on the speedometer indicate
the statuses of the following systems: cruise
control/limiter/Active Distance Assist
DISTRONIC2Index points3Outside temperature4Time5Area for additional values (example: tachome-
ter): tachometer/navigation/ECO display/
consumption/G-meter/dateThe fuel supply will be interrupted to protect
the engine when the red mark on the tachom-
eter (overrevving range) is reached.6Coolant temperature displayDuring normal operation, coolant temperature
display 6 is permitted to rise to the red
mark.Vehicles with 48 V on-board electrical system: POWER and CHARGE displays (electrical drive
support and recuperation power of the elec-
tric motor)7Selected drive programInstrument display and on-board computer225

8Selected transmission position9Center display area of the instrument display(example: standard display for a trip): assis-
tance/telephone/navigation/trip/media/
radio/styles and displays/service/possible settings for head-up displayAFuel level and fuel Nller Oap location indicator
Overview of buttons on the steering wheel
Depending on the equipment, the layout and the design of the control elements on the steeringwheel may diMer.
1Control panel for cruise control or Active Dis-
tance Assist DISTRONIC (  page 179)2G Back button, on-board computer3Touch Control, on-board computerTo navigate: swipeTo conNrm: press v4

The on-board computer is operated using the les-
hand Touch Control and the les-hand back/home
button.
When the on-board computer is being operated,
diMerent acoustic signals will sound as operating
feedback, e.g. when you reach the end of a list.
\bTo operate Touch Control in the most eMective
way, use the tip of your thumb if possible.
The following menus are available:
= Assistance
= Phone
= Navigation
= Trip
= Radio
= Media
= Service
= Vehicles with an instrument display in the
widescreen cockpit: Designs\bYou can Nnd information about the possible
settings and selections on the menus in the Digital Operator\bs Manual.
The menus can be called up from the menu bar
on the instrument display.
To call up the menu bar: press the les-hand
back button until the menu bar is displayed.\bVehicles without Active Distance Assist
DISTRONIC: press the

Press the les-hand Touch Control.
The selected menu will be displayed full-
screen.
Overview of displays on the instrument display
Displays on the instrument display:
WActive Parking Assist activated
(  page 218)

System limits
The visibility of the displays will be aMected by the
following conditions:
= Seat position
= Image position setting
= Ambient light
= Wet road surface
= Objects on the display cover
= Polarization in sunglasses\bIn extreme sunlight, sections of the display
may appear washed out. You can correct thisby switching the head-up display oM and on
again.
Setting the head-up display using the on-board
computer
On-board computer:
4 HEAD-UP DISPLAY
The following head-up display settings or displays can be selected or shown:
= Position
=Brightness
= Messages
= Assistance status
= Telephone
= Audio
= Voice Control SystemTo select the settings menu: swipe to the right
on the les-hand Touch Control.
Settings menu 5 will be selected.To call up the Settings menu: press the les-
hand Touch Control.To adjust the position: swipe upwards or
downwards on the les-hand Touch Control.To adjust the brightness: swipe to the les or
right on the les-hand Touch Control.
Setting messages, assistance status, telephone,
audio and the Voice Control System
Press the les-hand Touch Control.
The list of setting options will be displayed.Swipe upwards or downwards on the les-hand
Touch Control.To choose settings: press the les-hand Touch
Control.
Selecting what the head-up display shows
(Example)
1Switching the head-up display on/oM2Les display areaNavigation systemAverage consumptionG-meter3Central display areaSpeedometerSet speed in the driver assistance system,
e.g. cruise controlInstrument display and on-board computer229

Warnings from driver assistance systems, e.g.
distance warning4Right display areaTraPc Sign AssistAssistant display5To adjust the position, brightness and lower
display area6Index points7Lower display area (example: les display area)
You can hide display areas 2 to 4 that are not
required.
\bIn audio mode, the station name or track will be shown temporarily when the audio source
is being actively operated. In addition, the lat-
est calls will be displayed when the telephone list on the instrument display is actively oper-
ated.Swipe upwards on les-hand Touch Control.Press the les-hand Touch Control.Switching the Head-up Display on/oM via the mul-
timedia system
Multimedia system:
4 © 5
Settings 5
Quick Access
Select HUD.
The Head-up Display is activated.230Instrument display and on-board computer