Page 121 of 649
4-26
Instrument cluster
LCD display modes
Modes Symbol Explanation
Trip
ComputerThis mode displays driving information such as the tripmeter,
fuel economy, etc.
For more details, refer to "Trip Computer" in this chapter.
Turn By
Turn (TBT)
This mode displays the state of the navigation.
Driving
Assist
- Smart Cruise Control
- Drive Attention Warning
- Intelligent Speed Limit Warning
User
Settings
In this mode, you can change settings of the doors, lamps,
etc.
Warning
- This mode displays warning messages related to the
lamp malfunction, etc.
- Tyre pressure information
The information provided may differ depending on which functions are applicable
to your vehicle.
Page 122 of 649
4-27
04
Trip computer mode
OIK047124N
The trip computer mode displays
information related to vehicle driving
parameters including fuel economy,
tripmeter information and vehicle speed.
For more details, refer to "Trip
Computer" in this chapter.
Turn By Turn (TBT) group
OIK047151N
This group displays the state of the
navigation.
Driving Assist mode
OBC3070041
6 & & , 6 / $
This mode displays the state of Smart
Cruise Control, Intelligent Speed Limit
Assist.
For more details, refer to each system
information Section in chaptet 7.
OBC3070068
' U L Y H U $ W W H Q W L R Q : D U Q L Q J
L I H T X L S S H G
This group displays information related
to Driver Attention Warning.
For more details, refer to "Driver
Attention Warning (DAW)" in chapter 7.
Page 123 of 649
4-28
Instrument cluster
Master warning
OTM050218L
This warning light informs the driver the
following situations.
- Forward Collision-Avoidance Assist
malfunction (if equipped)
- Forward Collision-Avoidance Assist
radar blocked (if equipped)
- Blind-Spot Collision Warning
malfunction (if equipped)
- Blind-Spot Collision Warning radar
blocked (if equipped)
- Lamp malfunction (if equipped)
- High Beam Assist malfunction
(if equipped)
- Smart Cruise Control malfunction
(if equipped)
- Tyre Pressure Monitoring System
malfunction
The Master Warning Light illuminates
if one or more of the above warning
situations occur.
At this time, a Master Warning icon (
)
will appear beside the User Settings icon
(
), on the LCD display.
If the warning situation is solved, the
master warning light will be turned
off and the Master Warning icon will
disappear.
ONX4E040023
7 \ U H 3 U H V V X U H
This mode displays information related
to Tyre Pressure.
For more details, refer to "Tyre Pressure
Monitoring System (TPMS)" in chapter
8.
Page 124 of 649
4-29
04
User settings mode
(if equipped)
In this mode, you can change the
settings of the instrument cluster, doors,
lamps, etc.
1. Driver Assistance
2. Cluster
3. Lights
4. Door
5. Convenience
6. Units
7. Language
8. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.
6 K L I W W R 3 W R H G L W V H W W L Q J V ( Q J D J H
S D U N L Q J E U D N H W R H G L W V H W W L Q J V
This warning message illuminates if
you try to select an item from the User
Settings mode whilst driving.
[ $ X W R P D W L F W U D Q V P L V V L R Q , Q W H O O L J H Q W
variable transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
[ 0 D Q X D O W U D Q V P L V V L R Q
For your safety, change the User
Settings after engaging the parking
brake.
4 X L F N J X L G H + H O S
This mode provides quick guides for the
systems in the User Settings mode.
Select an item, press and hold the OK
button.
For more details about each system,
refer to this Owner’s Manual.
Page 127 of 649
4-32
Instrument cluster
& O X V W H U
ItemsExplanation
Fuel economy[ $ I W H U Y H K L F O H U H V W D U W
[ $ I W H U U H I X H O L Q J
[ $ Y H U D J H ) X H O ( F R Q R P \
For more details, refer to "Trip Computer" in this chapter
Fuel economy
auto reset[ 2 I I
[ $ W G U L Y L Q J
[ $ W U H I X H O O L Q J
For more details, refer to "Trip Computer" in this chapter
Wiper/Lights
displayTo activate or deactivate the Wiper/Light mode.When activated, the
LCD display shows the selected Wiper/Light mode whenever you
changed the mode.
Traffic signsTo set the traffic signs displayed.
Icy road warningTo activate or deactivate the icy road warning.
Welcome soundTo activate or deactivate the welcome sound.
Theme selectionYou can select the theme of the cluster.
[ 7 \ S H % & O X V W H U
Link to Drive Mode / Theme A / Theme B / Theme C / Theme D
/ L J K W V
ItemsExplanation
IlluminationTo adjust the illumination level.
[ / H Y H O a
One touch turn
indicator[ 2 I I 7 K H R Q H W R X F K W X U Q V L J Q D O I X Q F W L R Q Z L O O E H G H D F W L Y D W H G
[ ) O D V K H V 7 K H W X U Q V L J Q D O L Q G L F D W R U Z L O O E O L Q N R U W L P H V Z K H Q
the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Ambient light
brightness[ 2 I I
[ / H Y H O
HBA (High Beam
Assist)To activate or deactivate High Beam Assist. For more details, refer to
"High Beam Assist (HBA)" in chapter 5.
❈ The information provided may differ depending on which functions are applicable
to your vehicle.
Page 145 of 649
5-4
Convenient features
ACCESSING YOUR VEHICLE
Remote key (if equipped)
OIB034040
Your HYUNDAI uses a remote key, which
you can use to lock or unlock a door
(and tailgate) and even start the engine.
(1) Door Lock
(2) Door Unlock
(3) Tailgate Unlock
Locking
To lock :
1. Close all doors, engine bonnet and
tailgate.
2. Press the Door Lock button (1) on the
remote key.
3. The doors will lock. The hazard
warning lights will blink once. Also,
the outside rearview mirror will fold,
if the User Settings mode on the LCD
display. For more details, refer to “LCD
Display” in chapter 4.
4. Make sure the doors are locked by
checking the position of the door lock
button inside the vehicle.
WARNING
Do not leave the keys in your
vehicle with unsupervised children.
Unattended children could place the
key in the ignition switch and may
operate power windows or other
controls, or even make the vehicle
move, which could result in serious
injury or death.
Unlocking
To unlock:
1. Press the Door Unlock button (2) on
the remote key.
2. The doors will unlock. The hazard
warning lights will blink two times.
Also, the outside rearview mirror will
unfold, if the User Settings mode on
the LCD display. For more details,
refer to “LCD Display” in chapter 4.
i Information
After unlocking the doors, the doors will
lock automatically after 30 seconds unless
a door is opened.
Tailgate unlocking
To unlock:
1. Press the Tailgate Unlock button (3)
on the remote key for more than one
second.
2. The hazard warning lights will blink
two times. Once the tailgate is opened
and then closed, the tailgate will lock
automatically.
i Information
Page 158 of 649
5-17
05
Automatic door lock and unlock
features
Impact sensing door unlock system
(if equipped)
All doors will be automatically unlocked
when an impact causes the air bags to
deploy.
Speed sensing door lock system
(if equipped)
All doors will be automatically locked
when vehicle speed exceeds 9 mph (15
km/h).
You can activate or deactivate the Auto
Door Lock/Unlock features from the
User Settings Mode on the LCD display.
) R U P R U H G H W D L O V U H I H U W R U / & ' ' L V S O D \V
in chapter 4. If your vehicle is equipped
with additional navigation, please refer
to the infotainment system manual
separately supplied.
Child-protector rear door locks
OBC3050012
The child safety lock is provided to help
prevent children seated in the rear from
accidentally opening the rear doors.
The rear door safety locks should be
used whenever children are in the
vehicle.
The child safety lock is located on the
edge of each rear door. When the child
safety lock is in the lock position, the
rear door will not open if the inner door
handle is pulled.
To lock the child safety lock, insert a key
(or screwdriver) (1) into the hole and turn
it to the lock position.
To allow a rear door to be opened from
inside the vehicle, unlock the child
safety lock.
WARNING
If children accidently open the rear
doors whilst the vehicle is in motion,
they could fall out of the vehicle. The
rear door safety locks should always
be used whenever children are in the
vehicle.
Page 196 of 649
5-55
05
AUTO (Automatic) control
(if equipped)
The rain sensor located at the top of the
windscreen glass senses the amount of
rainfall and controls the wiping cycle for
the proper interval. The wiper operation
time will be automatically controlled,
depending on rainfall.
When the rain stops, the wiper stops. To
vary the speed setting, turn the speed
control knob.
If the wiper switch is set in AUTO mode
when the ignition switch is in the ON
position, the wiper will operate once to
perform a self-check of the system. Set
the wiper to the OFF position when the
wiper is not in use.
WARNING
To avoid personal injury from the
windscreen wipers, when the engine
is running and the windscreen wiper
switch is placed in the AUTO mode:
Do not touch the upper end of the
windscreen glass facing the rain sensor.
Do not wipe the top of the windscreen
glass with a damp or wet cloth.
Do not put pressure on the windscreen
glass.
NOTICE
When washing the vehicle, set the
Z L S H U V Z L W F K L Q W K H 2 ) ) S R V L W L R Q W R V W R S
the auto wiper operation. The wiper
may operate and be damaged if the
switch is set in the AUTO mode whilst
washing the vehicle.
Do not remove the sensor cover
located at the top of the passenger side
windscreen glass. Damage to system
parts could occur and may not be
covered by your vehicle warranty.
Windscreen washers
OTLE045168
In the OFF (O) position, pull the lever
gently toward you to spray washer
fluid on the windscreen and to run the
wipers 1-3 cycles. The spray and wiper
operation will continue until you release
the lever. If the washer does not work,
you may need to add washer fluid to the
washer fluid reservoir.
WARNING
When the outside temperature is
below freezing, ALWAYS warm the
windscreen using the defroster to
prevent the washer fluid from freezing
on the windscreen and obscuring your
vision which could result in an accident
and serious injury or death.
