2023 HYUNDAI I20 oil viscosity

2-20
Vehicle information
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only
lubricants of the proper quality. The correct lubricants also help promote engine
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1
(drain and refill)Smartstream G 1.0
T-GDi/Smartstream *2
G1.0 T-GDi (48V) MHEV
b,PSTWV
Full synthetic SAE 0W20,
API SN PLUS/SP or ILSAC
GF-6
Smartstream G1.2*
2 
b,PSTWV
Petrol 1.4 *
3 
b,PSTWVFull synthetic SAE 5W20,
API Latest(ILSAC Latest)
Manual
transmission
fluidSmartstream G 1.0
T-GDi/Smartstream
G1.0 T-GDi (48V) MHEVa
b
(1.3~1.4 Imp. qts.)API GL-4, SAE 70W
- SK : HK SYN MTF 70W
- H.K.SHELL : SPIRAX S6
GHME 70W MTF
- GS CALTEX : GS MTF HD
70W Smartstream G 1.2a
b
(1.1~1.2 Imp. qts.)
Petrol 1.4a
b
(1.3~1.4 Imp. qts.)
Intelligent
manual
transmission
system
actuator fluidSmartstream G1.0
T-GDi (48V) MHEV
b86TWSAE J1704 DOT-4 LV,
ISO4925 CLASS-6, FMVSS116
DOT-4, FMVSS116 DOT-3
Automatic
transmission
fluidPetrol 1.4
b,PSTWVATF SP-IV
- SK ATF SP-IV
- MICHANG ATF SP-IV
- NOCA ATF SP-IV
- Hyundai Genuine ATF SP-IV
- GS ATF SP-IV
Dual clutch
transmission
fluidSmartstream G 1.0
T-GDi/Smartstream
G1.0 T-GDi (48V) MHEVa
b
(1.4~1.5 Imp. qts.)API GL-4, SAE 70W
HK D DCTF TGO-10 (SK)
SPIRAX S6 GHDE 70W DCTF
(H.K.SHELL)
7 DCTF HKM (S-OIL)
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*2 : Requires grade engine oil. If a lower grade engine oil
(mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be
replaced as indicated severe maintenance condition
*
3 : Requires grade engine oil. If a lower grade engine
oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must
be replaced as indicated severe maintenance condition

2-22
Vehicle information
5HFRPPHQGHG6$(YLVFRVLW\QXPEHU
&$87,21
$OZD\VEHVXUHWRFOHDQWKHDUHDDURXQGDQ\ILOOHUSOXJGUDLQSOXJRUGLSVWLFN
before checking or draining any lubricant. This is especially important in dusty or
sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug
and dipstick areas will prevent dirt and grit from entering the engine and other
mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather
operating (engine start and engine oil flowability). Lower viscosity engine oils can
provide better fuel economy and cold weather performance, however, higher
viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils
of any viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be
operated in before the next oil change.
Proceed to select the recommended oil viscosity from the chart.
7HPSHUDWXUH5DQJHIRU6$(9LVFRVLW\1XPEHUV
Temperature°C -30 -20 -10 0 10 20 30 40 50
(°F) -10 0 20 40 60 80 100 120
Smartstream G1.2/
G1.0 T-GDI/48V MHEV *
10W-20
Gasoline 1.4 *1
0/5W-20, 0/5W-30
10W-30
15W-40
20W-50
*1 : If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in terms of
engine oil change.
An engine oil displaying this American Petroleum Institute(API)
Certification Mark conforms to the International Lubricant
Specification Advisory Committee (ILSAC). It is recommended
to only use engine oils that uphold this API Certification Mark.

6-63
06
&KDLQ,QVWDOODWLRQ
When installing tyre chains, follow the
manufacturer’s instructions and mount
them as tightly possible. Drive slowly
(less than 20 mph (30 km/h)) with
chains installed. If you hear the chains
contacting the body or chassis, stop and
tighten them. If they still make contact,
slow down until the noise stops. Remove
the tyre chains as soon as you begin
driving on cleared roads.
When mounting snow chains, park
the vehicle on level ground away from
traffic. Turn on the vehicle Hazard
Warning Flasher and place a triangular
emergency warning device behind the
vehicle (if available). Always place the
vehicle in P (Park), apply the parking
brake and turn off the engine before
installing snow chains.
NOTICE
When using tyre chains:

[Wrong size chains or improperly
installed chains can damage your
vehicle’s brake lines, suspension,
body and wheels.

[Use SAE “S” class or wire chains.

[If you hear noise caused by chains
contacting the body, retighten the
chain to prevent contact with the
vehicle body.

[To prevent body damage, retighten
the chains after driving 0.3~0.6 miles
(0.5~1.0 km).

[Do not use tyre chains on vehicles
equipped with aluminium wheels. If
unavoidable, use a wire type chain.

[Use wire chains less than 0.47 in (12
mm) wide to prevent damage to the
chain’s connection.
Winter Precautions
Use high quality ethylene glycol coolant
Your vehicle is delivered with high
quality ethylene glycol coolant in the
cooling system. It is the only type of
coolant that should be used because it
helps prevent corrosion in the cooling
system, lubricates the water pump and
prevents freezing. Be sure to replace or
replenish your coolant in accordance
with the maintenance schedule. Before
winter, have your coolant tested to
assure that its freezing point is sufficient
for the temperatures anticipated during
the winter.
Check battery and cables
Winter temperatures affect battery
performance. Inspect the battery and
cables, as specified in the chapter
9. The battery charging level can be
checked by a HYUNDAI authorised
repairer or in a service station.
Change to “winter weight” oil if
necessary
In some regions during winter, it is
recommended to use the “winter
weight” oil with lower viscosity. For
further information, refer to the chapter
2. When you are not sure about a type
of winter weight oil, consult a HYUNDAI
authorised repairer.