2022 TOYOTA GR86 turn indicator

85
2
2-1. Instrument cluster
Vehicle status information and indicators
*1: These lights turn on when the engine
switch is turned to ON to indicate
that a system check is being per-
formed. They will turn off after the
engine is started, or after a few sec-
onds. There may be a malfunction in
a system if a light does not come on,
or turn off. Have the vehicle
inspected by any authorized Toyota
retailer or Toyota authorized repairer,
or any reliable repairer.
*2: The front passenger’s seat belt
reminder light is located on the over-
head console.
*3: This light illuminates on the over-
head console.
The indicators inform the driver of
the operating state of the vehicle’s
various systems.
Automatic transmission fluid
temperature warning light (if
equipped) ( P.339)
Open door warning light
( P.339)
Low fuel level warning light*1
( P.339)
Driver’s and front passen-
ger’s seat belt reminder
light*1, 2 ( P.339)
Rear passengers’ seat belt
reminder lights*1, 3 ( P.340)
(yellow)
Conventional Cruise Control
indicator (if equipped)
( P.340)
BSD/RCTA warning light (if
equipped) ( P.340)
SRH warning light (if
equipped) ( P.340)
RAB warning light (if
equipped) ( P.341)
LED headlight warning light
( P.341)
Automatic headlight leveling
system warning light
( P.341)
Master warning light*1
( P.341)
EyeSight warning light (if
equipped) ( P.341)
Tire pressure warning light*1
( P.342)
GPF system warning light
( P.342)
WA R N I N G
■If a safety system warning light
does not come on
Should a safety syst em light such as the ABS and SRS warning light not
come on when you start the engine,
this could mean that these systems are not available to help protect you in
an accident, which could result in
death or serious injury. Have the vehi- cle inspected by your Toyota dealer
immediately if this occurs.
Indicators
Turn signal indicator
( P.150)
Tail light indicator ( P.153)
Headlight high beam indica-
tor ( P.154)
High beam assist indicator (if
equipped) ( P.156)
Rear fog light indicator
( P.159)
EyeSight temporary stop indi-
cator (if equipped) ( P.223)

862-1. Instrument cluster
Drive mode indicators
Normal mode
TRACK mode
*1: These lights turn on when the engine
switch is turned to ON to indicate
that a system check is being per-
formed. They will turn off after the
engine is started, or after a few sec-
onds. There may be a malfunction in
a system if a light does not come on,
or turn off. Have the vehicle
inspected by any authorized Toyota
retailer or Toyota authorized repairer,
Pre-Collision Braking Sys-
tem OFF indicator*1, 2 (if
equipped) ( P.183)
(white/gre
en)
Conventional Cruise Control
indicator (if equipped)
( P.202, 249)
(white/gre
en)
Adaptive Cruise Control indi-
cator (if equipped) ( P.191)
“READY” indicator (if
equipped) ( P.191)
Lead vehicle indicator (if
equipped) ( P.191)
Lead vehicle indicator*3 (if
equipped) ( P.191)
Your vehicle indicator (if
equipped) ( P.191)
Following distance setting
indicator (if equipped)
( P.191)
Following distance setting
indicator*3 (if equipped)
( P.191)
Lane Departure Warning
OFF indicator*1, 2 (if
equipped) ( P.215)
BSD/RCTA OFF indicator*2
(if equipped) ( P.229)
SRH OFF indicator*2 (if
equipped) ( P.156)
RAB OFF indicator*1, 2 (if
equipped) ( P.241)
(flashes)
Slip indicator*1 ( P.256)
VSC OFF indicator*1, 2
( P.257)
TRC OFF indicator*1, 2
( P.256)
Smart entry & start system
indicator*3 ( P.139)
Hill-start assist control ON
indicator ( P.253)
Security indicator ( P. 7 9 ,
81)
(blue)
Low coolant temperature
indicator*4
Gear Shift indicator ( P.145,
149)
Passenger’s frontal
airbag ON and OFF
indicator*1, 5 ( P. 3 2 )
Low outside temperature
indicator*6 ( P. 8 8 )
Snow mode indicator (if
equipped) ( P.252)
“SPORT” indicator (if
equipped) ( P.252)
Snow mode indicator (if
equipped) ( P.252)
“SPORT” indicator (if
equipped) ( P.252)
“TRACK” indicator
( P.257)
SNOW
SPORT

87
2
2-1. Instrument cluster
Vehicle status information and indicators
or any reliable repairer.
*2: The light comes on when the system
is turned off.
*3: This light illuminates on the
multi-information display.
*4: This indicator turns on when the
engine coolant temperature is low.
*5: This light illuminates on the over-
head console.
*6: When the outside temperature is
approximately 3°C (37°F) or lower,
this indicator will illuminate.

91
2
2-1. Instrument cluster
Vehicle status information and indicators
■Display items
 Odometer
Displays the total distance the vehicle
has been driven.
 Trip meter A/Trip meter B
Displays the distance the vehicle has
been driven since the meter was last
reset. Trip meters A and B can be used
to record and display different distances
independently.
To reset, display th e desired trip meter
and press and hold the display change
button.
When the headlights or front posi-
tion lights are on, the brightness of
the meter and instrument panel
lights can be adjusted using the
instrument panel brightness dial.
1 Brighter
2 Darker
■Instrument panel light brightness adjustment
When the headlights or front position
lights are turned on, the meter and instrument panel lights will be dimmed.
However, if the instrument panel bright-
ness dial is set to the highest position, the lights will not dim even if the head-
lights or front position are turned on.
■Auto dimmer cancel
When the surrounding area is bright, such as during the day, or if the lights
are turned on before necessary, the
automatic dimming function will be can- celled. In this case, the brightness can-
not be adjusted, even if the instrument
panel brightness dial is turned.
■Customization
Some functions can be customized.
( P.377)
The clocks can be adjusted on the
multimedia system screen.
■Setting the clock to be
adjusted automatically
1 Press .
2 Select .
3 Select “General”.
4 Select “Clock”.
5 Select “Time Setting”.
6 Select “Sync With Phone”.
The clock will be set and adjusted
automatically when a smartphone
is connected via Bluetooth®for
transferring phonebook data. For
Changing the instrument
panel light brightness
Adjusting the clock

95
2
2-1. Instrument cluster
Vehicle status information and indicators
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not
be updated. When refueling, turn the
engine switch off. If the vehicle is
refueled without turning the engine
switch off, the display may not be
updated.
■Driving information (page 3)
Use the display as a reference.
Average vehicle speed
Displays the average vehicle speed
since display was reset.
Driving time
Displays the cumulative time the vehi-
cle has been driven since display was
reset.
Driving distance
Displays the cumulative distance the
vehicle has been driven since display
was reset.
Pressing and hold ing will reset
the average vehicle speed/driving
time/driving distance.
■Driving information (page 4)
Displays each tire pressure.
( P.303)
■Display items
Press or of the meter con-
trol switch and select . Then
press or to display the fol-
lowing items:
 G-force
Suitable for confirming current lateral
G-forces on the vehicle.
 G-force (peak hold function)
Suitable for confirming the size and
direction of the maximum lateral
G-forces on the vehicle.
 Power and torque curve
 Stopwatch
■G-force
Displays lateral G-forces on the
vehicle.
Also displays, around the periph-
ery of the G-force display, the left
and right steering amount, acceler-
ator pedal input, and brake fluid
pressure.
This display is intended for use as a
guideline. Depending on factors
such as the road surface condition,
temperature and vehicle speed, the
display may not show the actual
condition of the vehicle.
A
C
Sport information

982-1. Instrument cluster
Select to display the operational
status of the Adaptive Cruise Con-
trol system ( P.185, 201)
The settings of the following sys-
tems can be changed.
 LDW (Lane Departure Warning)
(if equipped)
 PCB (Pre-Collision Braking) (if
equipped)
 BSD/RCTA (if equipped)
 RAB (Reverse Automatic Brak-
ing system) (if equipped)
 (Sonar Audible Alarm) (if
equipped)
 SRH (Steering Responsive
Headlight) (if quipped)
■Meter display settings that can
be changed
 Units (if equipped)
Select to change the units of measure
displayed.
 Startup Scrn
Select to enable/disable the startup
screen when the engine switch is
turned to ON.
 GSI (if equipped)
Select to enable/disable the shift posi-
tion indicator and shift-up indicator.
 REV. (REV indicator)
• Select to enable/disable the rev indi-
cator.
• Select to enable/disable the sounding
of a buzzer when the REV indicator is
illuminated.
• Select to set the engine speed at
which the rev indicator (orange) will
begin to be displayed.
■Vehicle functions and settings
that can be changed
 P.377
■Suspension of the settings display
●Some settings cannot be changed while driving. When changing set-
tings, park the vehicle in a safe place.
●If a warning message is displayed,
operation of the settings display will
be suspended.
Driving support system
information display (if
equipped)
Driving support system set-
ting display
Settings display
WA R N I N G
■Cautions during setting up the display
As the engine needs to be running
during setting up the display, ensure that the vehicle is parked in a place
with adequate ventilation. In a closed
area such as a garage, exhaust gases including harmful carbon mon-
oxide (CO) may colle ct and enter the
vehicle. This may lead to death or a serious health hazard.
NOTICE
■While setting up the display
To prevent battery discharge, ensure that the engine is running while set-
ting up the display features.

1003-1. Key information
3-1.Key information
The following keys are provided
with the vehicle.
Electronic keys
• Operating the smart entry & start sys-
tem ( P.109)
• Operating the wireless remote control
function ( P.101)
Mechanical keys
Key number plate
■When riding in an aircraft
When bringing an electronic key onto an
aircraft, make sure you do not press any
buttons on the electronic key while inside the aircraft cabin. If you are carry-
ing an electronic key in your bag etc.,
ensure that the buttons are not likely to be pressed accidentally. Pressing a but-
ton may cause the electronic key to emit
radio waves that could interfere with the operation of the aircraft.
■Electronic key battery depletion
●The standard battery life is 1 to 2 years.
●If the battery becomes low, an alarm
will sound in the cabin and a message will be shown on the multi-information
display when the engine is stopped.
●To reduce key battery depletion when
the electronic key is to not be used for
long periods of time, set the electronic key to the battery-saving mode.
( P. 111 )
●As the electronic key always receives
radio waves, the battery will become
depleted even if the electronic key is not used. The following symptoms
indicate that the electronic key battery
may be depleted. Replace the battery when necessary. ( P.316)
• The smart entry & start system or the
wireless remote control does not oper- ate.
• The detection area becomes smaller.
• The LED indicator on the key surface does not turn on.
●To avoid serious deterioration, do not leave the electronic key within 1 m (3
ft.) of the following electrical appli-
ances that produce a magnetic field: •TVs
• Personal computers
• Cellular phones, cordless phones and battery chargers
• Recharging cellular phones or cord-
less phones • Table lamps
• Induction cookers
■Replacing the battery
 P. 3 1 6
■Confirmation of the registered key number
The number of keys already registered
to the vehicle can be confirmed. Ask any authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer for details.
Keys
The keys
A
C
NOTICE
■To prevent key damage
●Do not drop the keys, subject them
to strong shocks or bend them.
●Do not expose the keys to high
temperatures for long periods of
time.

141
4
4-2. Driving procedures
Driving
Automatic transmission
1 Stop the vehicle completely.
2 Set the parking brake (P.151),
and shift the shift lever to P.
Check the parking brake indicator is
illuminated.
3 Press the engine switch.
The engine will stop, and the meter dis-
play will be extinguished.
4 Release the brake pedal and
check that “ACCESSORY” or
“IGNITION ON” is not shown on
the meters.
Manual transmission
1 Stop the vehicle completely.
2 Set the parking brake. (P.151)
Check the parking brake indicator is illuminated.
3 Shift the shift lever to N.
( P.147)
4 Press the engine switch.
The engine will stop, and the meter dis-
play will be extinguished.
5 Release the brake pedal and
check that “ACCESSORY” or
“IGNITION ON” is not shown on
the meters.
Modes can be changed by pressing
the engine switch with brake pedal
(automatic transmission) or clutch
pedal (manual transmission)
released. (The mode changes each
NOTICE
■Symptoms indicating a malfunc-
tion with the engine switch
If the engine switch seems to be oper- ating somewhat differently than usual,
such as the switch sticking slightly,
there may be a malfunction. Contact any authorized Toyota retailer or
Toyota authorized repairer, or any reli-
able repairer immediately.
Stopping the engine
WA R N I N G
■Stopping the engine in an emer-
gency
If you want to stop the engine in an
emergency while driving the vehicle,
press and hold the engine switch for
more than 2 seconds, or press it briefly 3 times or more in succession.
( P.326)
However, do not touch the engine switch while driving except in an
emergency. Turning the engine off
while driving will not cause loss of steering or braking control, but the
power assist to these systems will be
lost. This will make it more difficult to steer and brake, so you should pull
over and stop the vehicle as soon as
it is safe to do so.
●If the engine switch is operated
while the vehicle is running, a warn- ing message will be shown on the
multi-information display and a
buzzer sounds.
●Vehicles with an automatic trans-
mission: To restart the engine after performing an emergency shut-
down, shift the shift lever to N and
then press the engine switch.
●Vehicles with a manual transmis-
sion: To restart the engine after per- forming an emergency shutdown,
depress the clutch pedal and then
press the engine switch.
Changing engine switch
modes