2021 MERCEDES-BENZ V-CLASS display

mer
geinto tra1c on your ow n.PA RKTRONIC is still
av ailable. A
A
TTENTION ASSIST
TTENTION ASSIST F
F
unction of A
unction of A TTENTION ASSIST
TTENTION ASSIST
AT TENTION ASSIST can assist you on long, monot-
onous journe ys, e.g. on mo torw ays and trunk
ro ads. If ATTENTION ASSIST de tects indicators of
fa tigue or increased lapses in concentration on the
part of the driver, it suggests taking a break.
AT TENTION ASSIST is only an aid. It cannot alw ays
de tect dr owsiness or increased lapses in concen-
tration in good time. The system is not a substitute
fo r a well-rested and attentive driver. On long jour-
ne ys,ta ke regular and timely breaks that allow you
to rest prope rly.
If fatigue or increased lapses in concentration are
de tected, theATTENTION ASSIST: Take a break!
wa rning appears in the instrument cluster.
Yo u can ackno wledge the message and take a
break if necessar y.Ifyo u do not take a break and
AT TENTION ASSIST continues todetect increasing
lapses in concentration, you will be warned again
aTer a minimum of 15 minutes.
If a warning is displa yed in the inst rument cluster,
th e multimedia system o.ers tosear chfor a rest
area. You can select a rest area and start naviga-
tion tothis rest area. This function can be activa-
te d and deactivated in the multimedia system. Yo
u can ha vethe cur rent ATTENTION ASSIST
assessment displa yed using theAssistance
graphic menu in the on-board computer
(/ page 184).
The following information is displa yed:
R the journey length since the last break
R the attention le vel de term ined byATTENTION
ASSIS T:
- the fuller the bar is, the higher the de tected
attention le vel is
- the bar em pties as attentiveness decreases If
AT TENTION ASSIST cannot calculate the atten-
tion le vel and cannot issue a warning, theSystem
suspended message appears.
The bar display is then dimmed. This is the case,
fo rex ample, if you are predominantly driving at a
speed below 60 km/h or abo ve200 km/h.
Syst
Syst em limits
em limits
AT TENTION ASSIST is active in the 60 km/h to
200 km/h speed range.
The functionality of ATTENTION ASSIST is restric-
te d, and warnings may be dela yed or not occur at
all, in thefo llowing situations:
R the journey lasts less than appr oximately 30
minutes
R thero ad condition is poor (une venro ad sur-
fa ce or po tholes)
R theve hicle is subjected toa st rong crosswind
R you ha vea sporty driving st yle (high cornering
speeds or high rates of acceleration)
R the time is set incor rectly
R youch ange lanes and vary your speed fre-
qu ently in active driving situations
The ATTENTION ASSIST dr owsiness or alertness
assessment is dele ted and restar ted when continu-
ing the journey in thefo llowing situations:
R You switch o. theve hicle.
R Ifyo u unfasten your seat belt and open the
driver's door (e.g. tochange drivers or take a
break).
Deactiv
Deactiv ating or activ
ating or activ ating A
ating ATTENTION ASSIST
TTENTION ASSIST
On-board computer:
4 ò 5
Settings 5
Assistance
5 ATTENTION ASSIST #
Change the setting and con/ rmusing thea
button.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the assistance graphic
in the inst rument cluster displa y.
Yo u can choose between thefo llowing settings:
R Off
R Standard: normal system sensitivity.
R Sensitive: higher system sensitivity. The driver
iswa rned earlier and the attention le vel de tec-
te dby the system is adap ted accordingl y. Driving and parking
173 173

T
T
r
r a1c
a1c Sign Assist
Sign Assist F
F
unction of
unction of Tr
Tra1c
a1c Sign Assist
Sign Assist
Tr a1c Sign Assist aids youby displaying de tected
speed limits and overtaking restrictions in the
inst rument cluster.
Since Tra1c Sign Assist also uses the data stored
in the navigation system, it can also update the
display without de tecting tra1c signs.
The camera also de tects tra1c signs with a restric-
tion indicated byan additional sign (e.g. when
we t).
% Tra1c signs are only displ ayed with there stric-
tion indicated byan additional sign in thefo l-
lowing cases:
R the tra1c signs must be obser ved with the
re striction
R the system is unable toclear lyde term ine
whe ther there striction applies
If th e system de tects that you are driving onto a
section of road in the wrong direction of tr avel, it
triggers a warning. This function is not available in
all countries.
Tr a1c Sign Assist is only an aid and is not alw ays
able tocor rectly display speed limits and overtak-
ing restrictions. The actual tra1c signs always
ha ve priority overth eTra1c Sign Assist displ ay.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
Ins
Ins tr trument clust
ument clust er display
er display
The Tra1c Sign Assist displ ayappears in theAssis-
tance graphic menu ofthe on-board computer
(/ page 184). 1
Perm issible speed
2 Perm issible speed when there is a restriction
3 Additional sign with restriction (e xample:
unknown restriction)
If Tra1c Sign Assist is not available or cann ot
de term ine the maximum permissible speed, thefo
llowing display appears in the assistance
gr aphic: Syst
Syst
em limits
em limits
The system may be impaired or may not function in
th efo llowing situations:
R Ifth ere is poor visibility, e.g. due toinsu1cient
illumination of the road, highly variable shade
conditions, or due torain, sno w,fog or heavy
spr ay.
R Ifth ere is glare, e.g. from oncoming tra1c,
direct sunlight or re0ections.
R Ifth ere is dirt on the windscreen in the vicinity
of the multifunction camera or if the camera is
misted up, damaged or obscured.
R Ifth e tra1c signs are hard todetect, e.g. due
to dirt or sno w,or because they are co vered,
or due toinsu1cient lighting.
R Ifth ere are ambiguous signs, e.g. tra1c signs
in road works or adjacent lanes.
R Ifth e information in the navigation system's
digital map is incor rect or out-of-date.
A
A ctiv ctiv ating/deactiv
ating/deactiv ating t
ating the
heTr
Tra1c
a1c Sign Assist
Sign Assist
w
w ar
ar ning function
ning function
On-board computer
4 ò 5
Settings 5
Assistance
5 Traffic Sign Assist #
T
To activ
o activ at
ate/deactiv
e/deactiv at
ate:
e: press thea button.
When thewa rning function is active and you pass a
tra1c sign, the inst rument cluster sho ws the tra1c
re gulations (speed limit and overtaking restriction)
fo r /ve seconds. The pr evious menu then reap-
pears automaticall y.
The wrong-w aywarning remains active if you deac-
tivate thewa rning function of Tra1c Sign Assist. Blind Spo
Blind Spo
t Assist
t Assist F
F
unction of Blind Spo
unction of Blind Spo t Assist
t Assist
Blind Spot Assist uses two lateral, rear-facing radar
sensors tomonitor the area directly next toand on
th e side behind theve hicle. 174
174
Driving and parking

Lane K
Lane K
eeping Assist
eeping Assist F
F
unction of Lane K
unction of Lane K eeping Assist
eeping Assist
Lane Keeping Assist ser vesto protect you against
unintentionally leaving your lane. You are also
wa rned bya noticeable vib ration in the steering
wheel and bythe status symbol 0ashing in the
inst rument cluster. Lane Keeping Assist is only an
aid and is not intended tokeep theve hicle in the
lane without the driver's cooperation.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
The function is available in the speed range
between 60 km/h and 200 km/h.
The warning is issued when thefo llowing condi-
tions are met at the same time:
R If Lane Keeping Assist de tects lane markings.
R If a front wheel drives over lane markings.
To ensure that you are warned only when neces-
sary and in good time if you cross the lane mar k-
ing, the system de tects cer tain conditions and
wa rnsyo u accordingl y.
The warning vibration occurs earlier under thefo l-
lowing conditions:
R you approach the outer lane marking on a
bend.
R thero ad has very wide lanes, e.g. a mo torw ay.
R the system de tects solid lane markings.
The warning vibration occurs later under thefo l-
lowing conditions:
R you are driving on a road with nar row lanes.
R you cut the corner on a bend.
Syst
Syst em limits em limits
The system may be impaired or may not function in
th efo llowing situations:
R Ifth ere is poor visibility, e.g. due toinsu1cient
illumination of the road, if there are highly vari-
able shade conditions or in rain, sno w,fog or
spr ay.
R Glare from oncoming tra1c, direct sunlight or
re 0ections.
R Thereis dirt on the windscreen in the vicinity
of the multifunction camera or the camera is
misted up, damaged or obscured.
R No or se veral unclear lane markings are pres-
ent for one lane, e.g. in a construction area. R
Ifth e lane markings are wornawa y,dark or
co vered up.
R Ifth e distance totheve hicle in front is too
short and thus the lane markings cannot be
de tected.
R The lane markings change quickl y,e.g. lanes
branch o., cross one ano ther or mer ge.
R The ca rriag ewa y isvery nar row and winding.
A
A ctiv ctiv ating/deactiv
ating/deactiv ating Lane K
ating Lane Keeping Assist
eeping Assist #
Press theÇ button.
If th e indicator lamp in the button is lit, Lane
Ke eping Assist is activated. If all conditions
ha ve been satis/ed, there may be a warning.
If Lane Keeping Assist is activated and you are
driving at speeds abo ve60 km/h and lane
markings are de tected, the lines in the assis-
ta nce display menu of the on-board computer
are shown in green. Lane Keeping Assist is
re ady for use.
When the system switches over, theLane
Keeping Assist on orLane Keeping Assist off
message is shown brie0y in the inst rument
cluster displa y.
% You can /nd information on the assistance
gr aphic menu under "Assistance graphic"
(/ page 184).
Se
Se tting t
tting t he sensitivity of Lane K
he sensitivity of Lane K eeping Assist
eeping Assist
On-board computer:
4 ò 5
Settings 5
Assistance
5 Lane Keeping Assist #
Select theStandard orAdaptive setting. 176
176
Driving and parking

The
eyelet on the ball neck is used exclusively for
attaching the trailer break away cable. You must
not attach a tow rope, a tow bar or anything similar
to theey elet. The eyelet has not been designed for
such a load and may tear. #
ShiT the transmission toposition j. #
Apply theve hicle's parking brake. #
Close all the doors. #
Position the trailer on a le vel sur face behind
th eve hicle.
% The height of the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjustable dr awbar. #
Couple up the trailer. #
T
To inst
o inst all an adapt
all an adapt er
er:
:open the co ver of the
soc ket. #
Inse rtplug 2with tab1 inthe soc ket's
gr oo ve 3 . #
Turn plug 2clockwise as far as it will go. #
Letthe co ver engage. #
Attach the cable tothe trailer with cable ties
(only in the case of adap ter cables). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. #
Establish all electrical and other connections
to the trailer. In the process, attach the trailer's
break away cable totheey elet on the ball nec k. #
Check that the trailer's lighting system works
proper ly.
A trailer is de tected only if the electrical con-
nection is established cor rectly and the lighting
system is in working order. The function of
ot her systems also depends on this, e.g. ESP ®
,
PA RKTRONIC, Active Parking Assist, Blind Spot
Assist or Lane Keeping Assist. Even if
the trailer is connected cor rectl y,a mes-
sage may ne vertheless appear on the inst rument
cluster display in thefo llowing cases:
R LEDs ha vebeen ins talled in the trailer's lighting
system.
R The cur rent has fallen below the trailer lighting
system's minimum cur rent (50 mA)
% You can connect accessories up toa maxi-
mum of 240 W tothe permanent po wer sup-
pl y. #
Remo veobjects or devices that pr event the
trailer from rolling, e.g. choc ks. #
Release the trailer's parking brake.
U
Uncoupling a tr ncoupling a tr ailer
ailer &
W
WARNING
ARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may become
trapped between theve hicle and the trailer
dr aw bar. #
Do not uncouple trailers with an engaged
overrun brake. *
N NOOTE
TE Damage when uncoupling in a state
of ove rrun Uncoupling in a state of
overrun can damage
th eve hicle. #
Do not uncouple trailers with an engaged
overrun brake. #
ShiT the transmission toposition j. #
Apply theve hicle's parking brake. #
Close all the doors. #
Apply the trailer's parking brake. #
Further secure the trailer against rolling away
with a wheel chock or similar object. #
Remo vethe trailer cables and saf etych ains. #
Uncouple the trailer. 180 180
Driving and parking

Ov
Ov
er
ervie
vie w of t
w of t he ins
he ins tr
trument clust
ument clust er
er Inst
rument cluster (e xample)
1 Speedome ter
2 Display
3 Rev counter
4 Coolant temp erature display
5 Fuel le vel
Speedom et
Speedom eter
er
In vehicles with Active Distance Assist DISTRONIC,
th ere are illuminated segments on the speedome-
te r dial.
These segments show you what speed range is
av ailable:
R Variable limi ter activated (/ page 158)
The segments light up from the start of the
scale tothe selected limit speed.
R Active Distance Assist DISTRONIC switched on
(/ page 161)
One or two segments light up in the sa ved
speed range.
R Active Distance Assist DISTRONIC de tects a
ve hicle in front.
The segments light up from the speed of the
ve hicle in front up tothe sa ved speed.
Yo u can show the speed as a digital speedome ter
on the display as well.
If yo uch ange your vehicle's wheel size, check its
assignment tothe wheel size group (/ page 260).
If th e assignment changes without recoding the
cont rol units in theve hicle, the speedome ter will
not display the speed accuratel y.The cur rent vehi-
cle speed may then be higher than the speed
shown bythe speedome ter. Driving and driving
saf ety systems may then be operationally impaired
or may de tect a malfunction and switch them-
sel ves o..
In some countries, an audible signal will sound
and/or a message will appear on the display when th
eve hicle reaches the maximum speed permitted
by law, e.g. at 120 km/h.
R
R e
ev count
v count er
er
* NO
NOTE
TEEngine damage due tomaximum
engine speed being exceeded If
th e maximum permissible engine speed is
ex ceeded, the engine may be damaged. #
Avoid driving in there d speed range
(danger zone). Outside t
Outside t
em
emper
per atur
atur e display
e display
Yo u should pay special attention toroad conditions
when temp eratures are around freezing point.
The outside temp erature is shown on the inst ru-
ment cluster display (/ page 183).
Changes in the outside temp erature will be dis-
pla yed aTer a short dela y.
Coolant t
Coolant t em
emper
per atur
atur e display
e display &
W
WARNING
ARNING Risk of burns when opening the
bonnet
If yo u open the bonnet in theev ent of an over-
heated engine or /re in the engine compart-
ment, thefo llowing situations may occur:
R You may come into contact with hot gases.
R You may come into contact with other
escaping hot operating 0uids. #
Before opening the bonnet, allow the
engine tocool down. #
Intheev ent of a /re in the engine com-
partment, keep the bonnet closed and
call the /re service. The coolant
temp erature display is located within
th e inst rument cluster's rev counter.
During normal driving and if the coolant le vel is
cor rect, the display is permitted torise to120°C. Ov
Ov
er
ervie
vie w and oper
w and oper ation of t
ation of the on-boar
he on-boar d com-
d com-
put
put er
er &
W
WARNING
ARNING Risk of distraction due toinfor-
mation systems and communications
equipment
If yo u operate information systems and com-
munications equipment integ rated in theve hi-
cle when driving, you could be distracted from Instrument cluster and on-board computer
181 181

th
e tra1c situation. This could also cause you
to lose control of theve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle in accordance with the tra1c
conditions and operate the equipment
with theve hicle stationar y. Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating the on-board computer. 1
Display
2 Right control panel
3 LeT control panel
When you switch the po wer supply on, the on-
board computer will be activated.
Ve hicles with manual transmission: if youre mo ve
th eke y,then quickly re-insert it and switch the
po we r supply on, the on-board computer and the
inst rument cluster will not be activated.
Yo u can control the displa ysand the settings on
th e on-board computer with the steering wheel
buttons on the leT 3and right 2control panels.
S
S t teer
eer ing-wheel butt
ing-wheel butt ons
ons LeT
LeT
contr
control panel on t ol panel on t he st
he steer
eering wheel
ing wheel
ò R
Call up the main menu
:
9 Pr Pr
ess
ess br
brie0y
ie0y
R Scroll thro ugh lists
R Select menu or function
R IntheRadio orMedia menu, open
th e track or station list and select a
station, audio track or video scene.
R IntheTelephone menu, switch to
th ete lephone book and select a
name or a telephone number. LeT
LeT
contr
contr ol panel on t
ol panel on t he st
he steer
eering wheel
ing wheel
:
9 Pr
Pr ess and hold ess and hold
R Quickly scroll thro ugh all lists
R IntheRadio orMedia menu, use
ra pid scroll toselect a station,
audio track or video scene.
R IntheTelephone menu withthe
te lephone book open, start rapid
scroll.
a R
In all menus, con/ rmthe selected
entry on the list or the display
R IntheRadio orMedia menu, open
th e list of available radio sources or
media.
R IntheTelephone menu, switch to
th ete lephone book and start dial-
ling the selected number.
ñ R
Switch o. LINGU ATRO NIC
% Pr
Pr ess
ess br
brie0y
ie0y
R Back
R Hide displ aymessages
R IntheRadio orMedia menu,exit
th e track or station list
R Exit thete lephone book or redial
memory
% Pr
Press and hold
ess and hold
R Call up the standard display in the
Trip menu Right contr
Right contr
ol panel on t
ol panel on t he st
he steer
eering wheel
ing wheel
6 R
Make or accept a call
R Switch tothere dial memory
~ R
Reject or end a call
R Exit thete lephone book or redial
memory
W
X R
Adjust thevo lume
ó R
Switch on LINGU ATRO NIC
8 R
Switch sound on/o. 182 182
Instrument clus
ter and on-board computer

Ov
Ov
er
ervie
vie w of dat
w of dat a sho
a sho wn on t
wn on t he ins
he instr
trument clus-
ument clus-
t
t er display
er display Display (e
xample)
1 Drive prog ram (/ page 144)
2 Additional speedome ter
3 Transmission position (/ page 141)
4 Time
5 Outside temp erature
6 Display section for display messages and
menus
7 Status area
To call up the list of menus in display section 6,
press theò steering-wheel button.
% You can switch additional speedome ter2 on
and o. on theInstrument cluster submenu of
th eSettings menu.
The following displa ysmay appear in status area
7 ofthe displa y:
Z GearshiT recommendation with manual
transmission (/ page 141) or automatic
transmission (/ page 144)
1 A door is not comple tely closed
= PARKTRONIC (/ page 165)
¯ Cruise control (/ page 157)
È Limiter (/ page 157)
z DSR (/ page 159)
_ Adaptive Highbeam Assist (/ page 110) or
Ad aptive Highbeam Assist Plus
(/ page 111) è
ECO start/stop function (/ page 139)
The following displa ysmay also be shown in the
fo ot er of the displa y:
R Xj YAc tive Parking Assist (/ page 170)
R ë HOLD function (/ page 164)
R Maximum permitted speed of 120 km/h
ex ceeded (for cer tain countries only)
R è Rear wind owwiper switched on
(/ page 118) A
A
djus
djusting t ting t he ins
he ins tr
trument lighting
ument lighting The displa
yson the inst rument cluster are illumina-
te d during the da y.A dimming function is not pos-
sible in da ylight.
The light sensor on the inst rument cluster auto-
matically controls the brightness of the display
lighting.
When the light has been switched on, the bright-
ness control is in0uenced bythe ambient light. Yo u
can then adjust the brightness of the inst rument
lighting and the display lighting with controller 1
as well. #
Turn cont roller 1up or down. Ov Ov
er
ervie
vie w of menus on t
w of menus on t he on-boar
he on-board com
d comput
puter
er
Use theò steering-wheel button tocall up the
list of menus and select a menu.
Yo u can /nd operating information in "Overview
and operation of the on-board computer"
(/ page 181). Instrument cluster and on-board computer
183 183

Depending on
theve hicle equipment, you can call
up thefo llowing menus:
R Trip menu (/ page 184)
R Navi menu (navigation inst ructions)
(/ page 185)
R Radio menu (/ page 187)
R Media menu (/ page 187)
R Telephone menu (/page 188)
R Assistance graphic menu (/page 184)
R Service menu (/ page 184)
R Settings menu (/ page 189) Menus and submenus
Menus and submenus
Ser
Ser
vice menu
vice menu #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Service menu. #
Press thea button tocon/rm.
Yo u ha vethefo llowing options in the Service
menu:
R Calling up display messages in the message
memory (/ page 281).
R Checking the tyre pressure electronically or
re starting the tyre pressure monitoring system
(/ page 258).
R Checking the engine oil le vel electronically
(/ page 184).
R Calling up the service due date
R Displaying theAd Blue ®
/ll le vel (in BlueTEC ®
ve hicles). Assist
Assist
ant displa
ant displa y menu
y menu #
Press theò button tocall up the list of
menus. #
With th e: or9 button, select the
Assistance graphic menu. #
Press thea button tocon/rm.
The status of thefo llowing driving or driving
saf ety systems can be displa yed:
R Rear wind owwiper (/ page 118)
R Active Brake Assist (/ page 155)
R ATTENTION ASSIST (/ page 173)
R DSR (/ page 159)
R Tra1c Sign Assist (/ page 174)
R Active Distance Assist DISTRONIC
(/ page 162)
R Lane Keeping Assist (/ page 176)
R Blind Spot Assist (/ page 175) #
Press the: or9 button toswitch
between the assistant display and theev alua-
tion of ATTENTION ASSIST (/ page 173).
The evaluation of ATTENTION ASSIST sh ows
th e length of journey since the last break and
th e calculated attention le vel. Calling up display
Calling up display
s on t
s on t heTr
he Trip menu
ip menu Displa
Displa
ying t
ying the r
he rang
ange and curr
e and curr ent fuel consump
ent fuel consump tion
tion 1
Appr oximate range
2 Current fuel consum ption
3 Recuperation display #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Trip menu. #
Press thea button. #
With th e: or9 button, select range
and consum ption.
If th ere is only a small amount of fuel leT in the
fuel tank, the display will show a vehicle being refu-
elled Ï instead of the appr oximate range 1. 184
184
Instrument cluster and on-board computer