2021 MERCEDES-BENZ V-CLASS warning

&
W
WARNI NG
ARNI NGRisk of accident despite Blind
Spot Assist
Blind Spot Assist does not react toeither sta-
tionary objects or vehicles approaching and
ov ertaking you at a greatly di.erent speed.
Blind Spot Assist cannot warndrivers in these
situations. #
Always pay careful attention tothe tra1c
situation and maintain a safe distance at
th e side of theve hicle. Obser
vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
If a vehicle is de tected abo vespeeds of appr ox-
imately 12 km/h and this vehicle subsequently
enters the monitoring range directly next toyour
ve hicle, thewa rning lamp in the outside mir ror
lights up red.
If a vehicle is de tected close toyour vehicle in the
lateral monitoring range and you switch on the turn
signal indicator in the cor responding direction, a
wa rning tone sounds. The redwa rning lamp in the
outside mir ror 0ashes. If the turn signal indicator
re mains switched on, all other de tected vehicles
are indicated only bythe 0ashing of there dwa rn-
ing lamp.
When youove rtake a vehicle, thewa rning only
occurs if the di.erence in speed is less than
appr oximately 20 km/h.
Syst Syst em limits
em limits
Blind Spot Assist may be limited in thefo llowing
situations:
R ifth ere is dirt on the sensors or the sensors
are obscured
R ifth ere is poor visibility, e.g. due tofog, heavy
ra in, snow or spr ay
R if nar row vehicles are within the monitoring
ra nge, e.g. bic ycles
R ifth ero ad has very wide or very nar row lanes
R ifve hicles are not driving in the middle of their
lane
Wa rnings may be issued in er ror when driving
close tocrash bar riers or similar solid lane bor-
ders. Warnings may be inter rupted when driving
alongside long vehicles, forex ample lor ries, for a
prolonged time.
Blind Spot Assist is not operational when reve rse
ge ar is engaged. If
yo u couple up a trailer, make sure that you ha ve
cor rectly es tablished the electrical connection.
Blind Spot Assist is then deactivated and theBlind
Spot Assist currently unavailable See Owner's
Manual message appears in the inst rument cluster
displa y.
A
A ctiv ctiv ating/deactiv
ating/deactiv ating Blind Spo
ating Blind Spo t Assist
t Assist
On-board computer:
4 ò 5
Settings 5
Assistance
5 Blind Spot Assist #
T
To activ
o activ at
ate/deactiv
e/deactiv at
ate:
e: press thea button.
When Blind Spot Assist is activated, grey radar
wa ves propagating towa rdthere ar appear next to
th eve hicle in the assistance graphic in the inst ru-
ment cluster displa y.Ifyo u drive faster than
12 km/h with Blind Spot Assist activated, the
ra dar waves in the assistance graphic are dis-
pla yed in green. Blind Spot Assist is ready for use.
If yo u switch on theve hicle while Blind Spot Assist
is activated, thewa rning lamps in the outside mir-
ro rs light up for appr ox. 1.5 seconds. R
R
ear Cr
ear Cr oss
ossTr
Tra1c
a1c Alert
Alert F
F
unction of R
unction of R ear Cr
ear Cross
oss Tr
Tra1c
a1c Alert
Alert
% The system is only available forve hicles with
Blind Spot Assist.
The system uses thera dar sensors in the bumper.
This wayth e area adjacent totheve hicle is contin-
ually moni tore d. If thera dar sensors are obscured
by vehicles or other objects, de tection is not possi-
ble.
% Also read the no tes on Blind Spot Assist
(/ page 174).
The system can warnof crossing tra1c when
re ve rsing out of a parking space. If the system
de tects a vehicle, thewa rning lamp in the outside
mir ror on the cor responding side lights up red. In a
critical situation, an additional warning tone
sounds.
The Rear Cross Tra1c Ale rtfunction is active
under thefo llowing conditions:
R Blind Spot Assist is activated.
R Reversege ar is engaged or theve hicle is
re ve rsing at walking pace.
The Rear Cross Tra1c Ale rtfunction is una vailable
when driving with a trailer. Driving and parking
175
175

Lane K
Lane K
eeping Assist
eeping Assist F
F
unction of Lane K
unction of Lane K eeping Assist
eeping Assist
Lane Keeping Assist ser vesto protect you against
unintentionally leaving your lane. You are also
wa rned bya noticeable vib ration in the steering
wheel and bythe status symbol 0ashing in the
inst rument cluster. Lane Keeping Assist is only an
aid and is not intended tokeep theve hicle in the
lane without the driver's cooperation.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
The function is available in the speed range
between 60 km/h and 200 km/h.
The warning is issued when thefo llowing condi-
tions are met at the same time:
R If Lane Keeping Assist de tects lane markings.
R If a front wheel drives over lane markings.
To ensure that you are warned only when neces-
sary and in good time if you cross the lane mar k-
ing, the system de tects cer tain conditions and
wa rnsyo u accordingl y.
The warning vibration occurs earlier under thefo l-
lowing conditions:
R you approach the outer lane marking on a
bend.
R thero ad has very wide lanes, e.g. a mo torw ay.
R the system de tects solid lane markings.
The warning vibration occurs later under thefo l-
lowing conditions:
R you are driving on a road with nar row lanes.
R you cut the corner on a bend.
Syst
Syst em limits em limits
The system may be impaired or may not function in
th efo llowing situations:
R Ifth ere is poor visibility, e.g. due toinsu1cient
illumination of the road, if there are highly vari-
able shade conditions or in rain, sno w,fog or
spr ay.
R Glare from oncoming tra1c, direct sunlight or
re 0ections.
R Thereis dirt on the windscreen in the vicinity
of the multifunction camera or the camera is
misted up, damaged or obscured.
R No or se veral unclear lane markings are pres-
ent for one lane, e.g. in a construction area. R
Ifth e lane markings are wornawa y,dark or
co vered up.
R Ifth e distance totheve hicle in front is too
short and thus the lane markings cannot be
de tected.
R The lane markings change quickl y,e.g. lanes
branch o., cross one ano ther or mer ge.
R The ca rriag ewa y isvery nar row and winding.
A
A ctiv ctiv ating/deactiv
ating/deactiv ating Lane K
ating Lane Keeping Assist
eeping Assist #
Press theÇ button.
If th e indicator lamp in the button is lit, Lane
Ke eping Assist is activated. If all conditions
ha ve been satis/ed, there may be a warning.
If Lane Keeping Assist is activated and you are
driving at speeds abo ve60 km/h and lane
markings are de tected, the lines in the assis-
ta nce display menu of the on-board computer
are shown in green. Lane Keeping Assist is
re ady for use.
When the system switches over, theLane
Keeping Assist on orLane Keeping Assist off
message is shown brie0y in the inst rument
cluster displa y.
% You can /nd information on the assistance
gr aphic menu under "Assistance graphic"
(/ page 184).
Se
Se tting t
tting t he sensitivity of Lane K
he sensitivity of Lane K eeping Assist
eeping Assist
On-board computer:
4 ò 5
Settings 5
Assistance
5 Lane Keeping Assist #
Select theStandard orAdaptive setting. 176
176
Driving and parking

In
theStandard setting, no warning vibration
occurs in thefo llowing situations:
R you operate the turn signal in the cor respond-
ing direction. In this event, thewa rnings are
suppressed for a cer tain period of time.
R a driving saf ety system in tervenes or regulates,
such as ABS, BAS or ESP ®
.
In theAdaptive setting,there will also be no warn-
ing vibration in thefo llowing situations:
R you accelerate hard, e.g. kickdown.
R you brake hard.
R you steer activel y,e.g. swer vetoavo id an
obstacle or change lane quickl y.
R you cut the corner on a sharp bend. T
T
r
railer oper
ailer oper ation
ation N
No
ot
tes on tr
es on tr ailer oper
ailer oper ation
ation &
W
WARNING
ARNING Risk of accident and injury if
th eto ngue weight is exceeded
The car rier system may de tach from theve hi-
cle, thereby endangering other road users. #
Always comply with the permissible
to ngue weight when using a car rier. Yo
u can /n dspeci/cations rega rding the ball neck
on the trailer's identi/cation plate. You can /nd
speci/cations rega rding the trailer on theto wing
ve hicle's identi/cation plate and in theTe ch nical
Data (/ page 279).
Yo u can attach car rier systems such as a bicycle
ra ck or load-bearing implement tothe ball nec k.
When using car rier systems on the ball nec k, the
maximum load capacity is 75 kg.
If th e trailer coupling is de tach able, it is essential
to comply with the operating inst ructions of the
trailer coupling manufactu rer.
Place your vehicle/trailer combination on sur faces
th at are as even as possible and secure it against
rolling away (/ page 150). Couple and uncouple
th e trailer carefull y. No
tethefo llowing rega rding theto ngue weight:
R Make full use of the maximum tongue weight,
where possible.
R Neverfa ll below a legally prescribed minimum
to ngue weight; theto ngue weight must alw ays
be positive.
R Do not exceed or fall below the permissible
to ngue weights – this must be obser ved during
loading and unloading of the trailer.
Do not exceed thefo llowing values:
R Perm itted braked or unbraked towing capacity
The maximum permissible towing capacity for
unbraked trailers is 750 kg.
R Perm issible rear axle load of theto wing vehicle
R Perm issible gross weight of theto wing vehicle
R Perm issible gross weight of the trailer
R Perm issible gross combination weight
R Maximum permissible speed of the trailer
The releva nt permitted values, which must not be
ex ceeded, can be found in thefo llowing places:
R Inyour vehicle documents
R Onthe identi/cation plate of the trailer hitch
R Onthe trailer's identi/cation plate
R Ontheve hicle identi/cation plate
If th ere are discrepancies between theva lues, the
lo we st one shall appl y.
Before driving o., ensure thefo llowing:
R The tyre pressure on there ar axle of theto w-
ing vehicle has been set forth e maximum load.
R The headlamps ha vebeen set cor rectl y.
Comply with the maximum permissible speed of
80 km/h or 100 km/h, even in countries in which
higher speeds are permitted forve hicle/trailer
combinations.
% During trailer operation, remember that
PA RKTRONIC is available only toa limi ted
ex tent, if at all.
% The height of the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjustable dr awbar. Driving and parking
177
177

V
V
ehicles wit
ehicles wit h a det
h a detac
achable tr
hable tr ailer coupling
ailer coupling
* NO
NOTE
TEIncreased risk of damage toprop-
erty due toattached ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball
nec k. Re
duce therisk of damage tothe trailer coupling
and contribute toenvironmental pr otection. If you
do not need the ball nec k,remo veit from the ball
neck mount and /t its co ver in there ar bumper
(/ page 178). Only with the co ver /t ted can the
emission values indicated forre al operation be
achie ved.
% During trailer operation, the permissible gross
ve hicle weight is increased by100 kg forve hi-
cles registered as passenger vehicles. The
maximum permissible rear axle load must be
obser ved. F
F
itting t
itting t he cov
he cov er f
er for tr
or tr ailer coupling
ailer coupling #
Insert the co ver 0ush into there cess on the
re ar bumper and press it upwards against the
bumper co vering at the latching points on the
outside right and leT. #
Turn fastene rsfrom position 1toposition
2. #
Ensure that thefa stene rsare fully engaged and
/rmly in position 2. A
A
tt
tt ac
ac hing t
hing t he ball neck
he ball neck &
W
WARNING
ARNING Risk of accident and injury due
to incor rectly ins talled and secured ball
neck
If th e ball neck is not engaged, it may become
loose while theve hicle is in motion and endan-
ge rot her road users. #
Engage the ball neck as described and
ensure that the ball neck is securely
installed. &
W
WARNING
ARNING Danger of accident due tonon-
engaged ball coupling
If th e ball coupling has not engaged, the trailer
can become de tach ed. #
Always engage the ball coupling as
described and ensure that it is securely
ins talled. R
R
eq
eq uir
uir ements:
ements:
R The trailer hitch key is available. #
Notethe number of theke yth at belongs tothe
ball neck of the trailer hitch.
Wi th th is number, you will receive a replace-
ment key at a Mercedes-Benz service centre.
% Depending on theve hicle equipment, the
holder forth e ball neck on theve hicle can be
pr otected with a co ver in the bumper. #
Release the two quick- re lease fastene rsforthe
co ver in the bumper and remo vethe co ver
( / page 178). #
Take the ball neck of the trailer hitch out of the
st ow age space on theright-hand side in the
re ar and st owthe co verawa y. #
Unlo cklock 6in handwheel 1with thekey.
Re d mark 3onthe handwheel must be
aligned with green area 2on ball neck 4
(/tting position). 178
178
Driving and parking

The
eyelet on the ball neck is used exclusively for
attaching the trailer break away cable. You must
not attach a tow rope, a tow bar or anything similar
to theey elet. The eyelet has not been designed for
such a load and may tear. #
ShiT the transmission toposition j. #
Apply theve hicle's parking brake. #
Close all the doors. #
Position the trailer on a le vel sur face behind
th eve hicle.
% The height of the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjustable dr awbar. #
Couple up the trailer. #
T
To inst
o inst all an adapt
all an adapt er
er:
:open the co ver of the
soc ket. #
Inse rtplug 2with tab1 inthe soc ket's
gr oo ve 3 . #
Turn plug 2clockwise as far as it will go. #
Letthe co ver engage. #
Attach the cable tothe trailer with cable ties
(only in the case of adap ter cables). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. #
Establish all electrical and other connections
to the trailer. In the process, attach the trailer's
break away cable totheey elet on the ball nec k. #
Check that the trailer's lighting system works
proper ly.
A trailer is de tected only if the electrical con-
nection is established cor rectly and the lighting
system is in working order. The function of
ot her systems also depends on this, e.g. ESP ®
,
PA RKTRONIC, Active Parking Assist, Blind Spot
Assist or Lane Keeping Assist. Even if
the trailer is connected cor rectl y,a mes-
sage may ne vertheless appear on the inst rument
cluster display in thefo llowing cases:
R LEDs ha vebeen ins talled in the trailer's lighting
system.
R The cur rent has fallen below the trailer lighting
system's minimum cur rent (50 mA)
% You can connect accessories up toa maxi-
mum of 240 W tothe permanent po wer sup-
pl y. #
Remo veobjects or devices that pr event the
trailer from rolling, e.g. choc ks. #
Release the trailer's parking brake.
U
Uncoupling a tr ncoupling a tr ailer
ailer &
W
WARNING
ARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may become
trapped between theve hicle and the trailer
dr aw bar. #
Do not uncouple trailers with an engaged
overrun brake. *
N NOOTE
TE Damage when uncoupling in a state
of ove rrun Uncoupling in a state of
overrun can damage
th eve hicle. #
Do not uncouple trailers with an engaged
overrun brake. #
ShiT the transmission toposition j. #
Apply theve hicle's parking brake. #
Close all the doors. #
Apply the trailer's parking brake. #
Further secure the trailer against rolling away
with a wheel chock or similar object. #
Remo vethe trailer cables and saf etych ains. #
Uncouple the trailer. 180 180
Driving and parking

Ov
Ov
er
ervie
vie w of t
w of t he ins
he ins tr
trument clust
ument clust er
er Inst
rument cluster (e xample)
1 Speedome ter
2 Display
3 Rev counter
4 Coolant temp erature display
5 Fuel le vel
Speedom et
Speedom eter
er
In vehicles with Active Distance Assist DISTRONIC,
th ere are illuminated segments on the speedome-
te r dial.
These segments show you what speed range is
av ailable:
R Variable limi ter activated (/ page 158)
The segments light up from the start of the
scale tothe selected limit speed.
R Active Distance Assist DISTRONIC switched on
(/ page 161)
One or two segments light up in the sa ved
speed range.
R Active Distance Assist DISTRONIC de tects a
ve hicle in front.
The segments light up from the speed of the
ve hicle in front up tothe sa ved speed.
Yo u can show the speed as a digital speedome ter
on the display as well.
If yo uch ange your vehicle's wheel size, check its
assignment tothe wheel size group (/ page 260).
If th e assignment changes without recoding the
cont rol units in theve hicle, the speedome ter will
not display the speed accuratel y.The cur rent vehi-
cle speed may then be higher than the speed
shown bythe speedome ter. Driving and driving
saf ety systems may then be operationally impaired
or may de tect a malfunction and switch them-
sel ves o..
In some countries, an audible signal will sound
and/or a message will appear on the display when th
eve hicle reaches the maximum speed permitted
by law, e.g. at 120 km/h.
R
R e
ev count
v count er
er
* NO
NOTE
TEEngine damage due tomaximum
engine speed being exceeded If
th e maximum permissible engine speed is
ex ceeded, the engine may be damaged. #
Avoid driving in there d speed range
(danger zone). Outside t
Outside t
em
emper
per atur
atur e display
e display
Yo u should pay special attention toroad conditions
when temp eratures are around freezing point.
The outside temp erature is shown on the inst ru-
ment cluster display (/ page 183).
Changes in the outside temp erature will be dis-
pla yed aTer a short dela y.
Coolant t
Coolant t em
emper
per atur
atur e display
e display &
W
WARNING
ARNING Risk of burns when opening the
bonnet
If yo u open the bonnet in theev ent of an over-
heated engine or /re in the engine compart-
ment, thefo llowing situations may occur:
R You may come into contact with hot gases.
R You may come into contact with other
escaping hot operating 0uids. #
Before opening the bonnet, allow the
engine tocool down. #
Intheev ent of a /re in the engine com-
partment, keep the bonnet closed and
call the /re service. The coolant
temp erature display is located within
th e inst rument cluster's rev counter.
During normal driving and if the coolant le vel is
cor rect, the display is permitted torise to120°C. Ov
Ov
er
ervie
vie w and oper
w and oper ation of t
ation of the on-boar
he on-boar d com-
d com-
put
put er
er &
W
WARNING
ARNING Risk of distraction due toinfor-
mation systems and communications
equipment
If yo u operate information systems and com-
munications equipment integ rated in theve hi-
cle when driving, you could be distracted from Instrument cluster and on-board computer
181 181

#
T
To select t
o select t he ne
he next or pre
xt or pre vious tr
vious trac
ack on t
k on t he
he
tr
tr ac
ac k list
k list: :brie0y press the: or9 but-
to n. #
T
To select a tr
o select a tr ac
ack on t
k on t he tr
he trac
ack lis
k list wit t wit h r
h rapid
apid
scr
scr oll:
oll: press and hold the: or9 button
until the desired track has been reached.
If yo u press and hold the: or9 button,
th era pid scroll speed will increase aTer a
short time. Not all audio pla yers or data stor-
age media support this function.
If th e cor responding track information has been
sa vedto the audio pla yer or data storage medium,
th e display can show thefo llowing:
R Track number
R Track name
R Artist
R Album
The track information will not be displ ayed in AUX
audio mode (auxiliary audio mode: extern al audio
source connected).
Oper
Oper ating video ating video #
T To select a dat o select a dat a st
a stor
orag
ag e medium:
e medium: brie0y press
th ea button.
The display will show the list of media sources. #
Press the: or9 button toselect a data
storage medium. #
Press thea button tocon/rm. #
T
To open t
o open t he scene list
he scene list: :brie0y press the:
or 9 button. #
T
To select t
o select t he ne
he next or pre
xt or pre vious scene on t
vious scene on t he
he
scene list
scene list: :brie0y press the: or9 but-
to n. #
T
To select a scene on t
o select a scene on t he scene lis
he scene list witt with r
h rapid
apid
scr
scr oll:
oll: press and hold the: or9 button
until the desired scene has been reached. #
Press thea button tocon/rm. T
T
elephone menu
elephone menu &
W
WARNING
ARNING Risk of distraction from operat-
ing integ rated communication equipment
while theve hicle is in motion
If yo u operate communication equipment inte-
gr ated in theve hicle when driving, you could
be distracted from the tra1c situation. This
could also cause youto lose control of the
ve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle whilst paying attention toroad
and tra1c conditions and operate the
equipment with theve hicle stationar y. When using
the phone, you must obser vethe legal
re qu irements forth e country in which you are cur-
re ntly driving. #
Switch on the mobile phone (see the separate
operating inst ructions from the manufacturer). #
Switch on the multimedia system. #
Insert the mobile phone into the mobile phone
cradle.
or #
Establish a Blue tooth ®
connection with the
multimedia system (/ page 209). #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Telephone menu. #
Press thea button tocon/rm.
The display will show one of thefo llowing mes-
sages:
R Telephone ready or name ofthe mobile
phone network pr ovider: the mobile phone
has found a network and is ready to
re ceive.
R Telephone No service: no network is avail-
able or the mobile phone is sear ching for a
networ k.
Yo u can obtain fur ther information about suitable
mobile phones and connecting mobile phones via
Blue tooth ®
from a Mercedes-Benz se rvice centre
or on the internet under https://www.mercedes-
benz.com/connect. #
T To accep
o accep t a call:
t a call: pressthe6 button.
If someone calls you when you are in theTele-
phone menu, a cor responding message will appear
on the displa y. #
T
To r
o r eject or end a call:
eject or end a call: pressthe~ button.
Dialling a number fr
Dialling a number fr om t
om t he t
he telephone book
elephone book #
Use the:, 9ora button toswitch
to thete lephone book. 188
188
Instrument cluster and on-board computer

Mer
Mer
cedes me calls
cedes me calls Making a call via t
Making a call via t
heov
he overerhead contr
head contr ol panel
ol panel %
Mercedes me calls are not possible in every
countr y.Contact a Mercedes-Benz service
centre to/nd out whe ther these functions are
av ailable in your countr y. 1
Breakd own assistance call button F
2 Coverfo rG button (SOS button)
3 G button (SOS button)
4 Info call button
Making a br
Making a br eakdo
eakdo wn assist
wn assist ance call
ance call #
Press button 1.
Making an emerg
Making an emerg ency call
ency call #
Brie0y press co ver2 onG button toopen
it. #
Press and hold Gbutton 3for at least one
second.
Making an Inf
Making an Inf o call
o call #
Press button 4.
An emer gency call can be initia tedev en if a break-
down assistance or Info call is active. This has pri-
ority over all other active calls. Inf
Inf
or
ormation about ser
mation about ser vice calls using t
vice calls using the butt
he buttons
ons
in t
in t heov
he overerhead contr
head contr ol panel
ol panel A call
tothe Mercedes-Benz customer centre via
th e info call button or breakdown call button in the
ove rhead control panel has been made.
In theev ent of a breakdown, you will getsupport:
R Aqu ali/ed Mercedes-Benz tech nician ca rries
out repairs on site and/or theve hicle will be to
we dto the nearest Mercedes-Benz service
centre
Yo u may be charge dfo rth ese services.
Yo u can /nd information on thefo llowing topics:
R Activation of Mercedes me connect
R Operating theve hicle
R Nearest Mercedes-Benz service cent re
R Other products and services from Mercedes-
Benz
Data is transmitted during the connection tothe
Mercedes-Benz Customer Centre (/ page 192). Calling t Calling t
he Mer
he Mercedes-Benz Cust
cedes-Benz Cust omer Centr
omer Centre using
e using
t
t he multimedia syst
he multimedia syst em
em R
R
eq
eq uir
uir ements:
ements:
R Access toa mobile phone network is available.
R The cont ract partner's mobile network co ver-
age is available in there specti veregion.
R The ignition must be switched on so that vehi-
cle data can be transfer red automatically
Multimedia system: 4 © 5
Phone 5
g #
Call Mercedes me connect .
Wi th your consent, the multimedia system
sends there qu ired vehicle data. The data
transfer is shown in the media displa y.
Then, you can select a service and be connected
to a contact at the Mercedes-Benz customer
centre. Calling t
Calling t
he Mer
he Mercedes-Benz cust
cedes-Benz cust omer centr
omer centre
eaTer
aTer
aut
aut omatic accident or br
omatic accident or br eakdo
eakdown det
wn det ection
ection R
R
eq
eq uir
uir ements:
ements:
R The vehicle has de tected an accident or break-
down situation.
R The vehicle is stationar y.
R The hazard warning light is switched on.
% This function is not available in all countries.
The vehicle can de tect accident or breakdown sit-
uations under limited conditions.
If an accident or breakdown is de tected, the emer-
ge ncy guide sh ows saf ety inst ructions in the multi-
media system displa y.
ATer quitting the emer gency guide display on the
multimedia system, a prom ptappears asking Mercedes me
191 191