2021 MAZDA MODEL CX-5 Owners Manual

Page 465 of 715

MAZDA MODEL CX-5 2021  Owners Manual Turn the temperature control dial to adjust
the temperature between 15 °C (60 °F) and
29 °C (84 °F).
When the SYNC switch is on:
Turn the driver temperature control dial
to control the temperat

Page 466 of 715

MAZDA MODEL CX-5 2021  Owners Manual Air intake selector
Outside or recirculated air positions can be
selected. Press the switch to select outside/
recirculated air positions.
Recirculated air position (
WARNING
Do not use the  position

Page 467 of 715

MAZDA MODEL CX-5 2021  Owners Manual Setting the temperature to maximum hot
or cold will not provide the desired
temperature at a faster rate.
When selecting heat, the system will
restrict airflow until the engine has
warmed to pre

Page 468 of 715

MAZDA MODEL CX-5 2021  Owners Manual What is Mazda Connect ?
▼What is Mazda Connect ?
For vehicles with the following display type, refer to the following page because your
vehicle is equipped with Mazda Connect (Type B).
Refer to What

Page 469 of 715

MAZDA MODEL CX-5 2021  Owners Manual *1 The location of the USB slot differs depending on the specifications.
*2 The SD card slot is for the navigation system only. For vehicles with the navigationsystem, the SD card (Mazda genu ine) wit

Page 470 of 715

MAZDA MODEL CX-5 2021  Owners Manual Even if the audio remote control switches are equipped on the steering wheel, learn to use the
switches without looking down at them so that  you can keep your maximum attention on the
road while driv

Page 471 of 715

MAZDA MODEL CX-5 2021  Owners Manual Mazda Connect Basic Operations
▼Mazda Connect Basic Operations
NOTE
The explanation of functions described in this 
manual may differ from the actual operation,
and the shapes of screens and buttons

Page 472 of 715

MAZDA MODEL CX-5 2021  Owners Manual 2. The operation is launched and the next item is displayed. 
Slide (USB audio only)
1. Touch the setting item displaying a slider bar.
2. Touch the slider with your finger and move to the desired lev