
3
.
.
Driving recommendations 103
Starting and stopping 1 04
Electronic engine immobiliser
 1
05
Parking brake
 
1
 05
Manual gearbox
 1
05
6-speed electronic gearbox
 1
06
Gear shift indicator
 
1
 08
Stop & Start
 
1
 08
Hill start assist
 
1
 11
Tyre under-inflation detection
 
1
 12
Tyre under-inflation detection with 
reinitialisation
 
113
Speed limiter
 1
15
Cruise control
 
1
 17
Active City Brake
 
1
 20
Parking sensors
 1
22
Reversing camera
 1
24Fuel 1
26
Fuel system cut-off  1 27
Compatibility of fuels
 1
28
Snow chains
 
1
 29
Removable snow shield
 
1
 30
Changing a wiper blade
 1
30
Towing device
 
1
 31
Towbar with a swan neck towball
 
1
 31
Roof bars
 
1
 33
Zenith roof bars
 
1
 33
Maximum weights on bars
 
1
 34
Other accessories
 1
34
Bonnet
 
13 5
Engines
 1
36
Checking levels
 
1
 36
Chec ks
 
13 8
AdBlue
® (BlueHDi engines) 1 40
Temporary puncture repair kit
 1
 43
Changing a wheel
 1
43
Fitting the wheel trim on the rim
 
1
 47
Changing a bulb
 1
49
Changing a fuse
 1
54
Battery
 
158
Economy mode
 
1
 59
Towing your vehicle
 
1
 59
Running out of fuel (Diesel)
 
1
 60
Characteristics of engines and towed loads 1 61Petrol engines/weights 162
Diesel engines/weights 1 63
Dimensions
 
165
Identification markings
 1
74
DrivingPractical information
In the event of a breakdown Technical data
Alphabetical index
Audio and Telematics
7-inch touch screen
Peugeot Connect Sound (RD5)
. 
Contents  

5
As a passenger, if you avoid connecting your 
multimedia devices (film, music, video game, 
etc.), you will contribute towards limiting 
the consumption of electrical energy and 
therefore of fuel.
Disconnect your portable devices before 
leaving the vehicle.
Eco- driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your 
gearbox
With a manual gearbox, move off gently and 
change up without waiting. While accelerating, 
change up early.
With an automatic gearbox, give preference 
to automatic mode and avoid pressing the 
accelerator pedal heavily or suddenly.
The gear shift indicator invites you to engage 
the most suitable gear: as soon as the 
indication is displayed in the instrument panel, 
follow it straight away.
For vehicles fitted with an automatic gearbox, 
this indicator appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, 
use engine braking rather than the brake 
pedal and press the accelerator gradually. 
These practices contribute towards a 
reduction in fuel consumption and CO
2 
emissions and also help to reduce the 
background traffic noise.
If your vehicle has cruise control, make use of 
the system at speeds above 25
 
mph (40   km/h) 
when the traffic is flowing well.
Control the use of your electrical 
equipment
Before moving off, if the passenger 
compartment is too warm, ventilate it by opening 
the windows and air vents before using the air 
conditioning.
Above 31
  mph (50   km/h), close the windows and 
open the air vents.
Consider using equipment that can help keep 
the temperature in the passenger compartment 
down (sunroof blind and window blinds, etc.).
Switch off the headlamps and foglamps when 
there is sufficient visibility without them.
Avoid running the engine before moving off, 
particularly in winter; your vehicle will warm up 
much faster while driving.
Unless it has automatic regulation, switch off 
the air conditioning as soon as the desired 
temperature has been reached.
Switch off the demisting and defrosting controls, 
if these are not automatically managed.
Switch off the heated seat as soon as possible.
. 
. 
Eco-drivingsommaire  

6
Limit the causes of excess 
consumption
Spread loads throughout the vehicle; place 
the heaviest items in the bottom of the boot, 
as close as possible to the rear seats.
Limit the loads carried in the vehicle and 
reduce wind resistance (roof bars, roof rack, 
bicycle carrier, trailer, etc.). Preferably, use a 
roof box.
Remove roof bars and the roof rack after use.
At the end of winter, remove snow tyres and 
refit your summer tyres.
Observe the recommendations 
on maintenance
Check the tyre pressures regularly, when cold, 
referring to the label in the door aperture, 
driver's side.
Carry out this check in particular:
- 
b
 efore a long journey,
-
 
a
 t each change of season,
-
 
a
 fter a long period out of use.
Do not forget the spare wheel and the tyres on 
any trailer or caravan. Have your vehicle ser viced regularly (engine 
oil, oil filter, air filter, passenger compartment 
filter, etc.) and obser ve the schedule of 
operations in the manufacturer's service 
schedule.
When filling the tank, do not continue after the 
3
rd cut-off of the nozzle to avoid over flow.
At the wheel of your new vehicle, it is only 
after the first 1,900
  miles (3,000   kilometres) 
that you will see the fuel consumption settle 
down to a consistent average. With a BlueHDi Diesel engine, if the SCR 
system is faulty, your vehicle becomes 
polluting. Visit a PEUGEOT dealer or a 
qualified workshop as soon as possible to 
bring your vehicle’s nitrogen oxide emissions 
back in line with the regulations. 
Eco-driving  

8
Warning and indicator lamps
Visual indicators informing the driver that 
a system is in operation, switched off (on/
off indicator lamps) or has developed a fault 
(warning lamps).
When the ignition is switched on
Certain warning lamps come on for a few 
seconds when the vehicle's ignition is switched 
on.
When the engine is started, these same 
warning lamps should go off.
If they remain on, before driving refer to the 
information on the warning lamp concerned.
Associated warnings
Certain lamps may come on in one of two 
modes: fixed (continuous) or flashing.
Only by relating the type of lighting to the 
operating status of the vehicle can it be 
ascertained whether the situation is normal or 
whether a fault has occurred.
In the event of a fault, the illumination of the 
lamp may be accompanied by an audible signal 
and/or a message.
Warning lamps
When the engine is running or the vehicle is 
being driven, illumination of one of the following 
warning lamps indicates a fault which requires 
action on the part of the driver.
Any fault resulting in the illumination of a 
warning lamp must be investigated further 
using the associated message.
If you encounter any problems, contact a 
PEUGEOT dealer or a qualified workshop.
Operation indicator lamps
If one of the following indicator lamps comes on 
in the instrument panel and/or instrument panel 
screen, this confirms that the corresponding 
system has come into operation.
Deactivation indicator lamp
If this indicator lamp comes on, this confirms 
that the corresponding system has been 
switched off intentionally.
This may be accompanied by an audible signal 
and a message being displayed. 
Instruments  

9
Warning/indicator lampStateCause Action/Observations
Red warning/indicator lamps
STOPFixed, associated with 
another warning lamp 
and accompanied 
by a message in the 
screen. Major faults linked with the "Brake 
fluid level", "Engine oil pressure 
and temperature", "Engine 
coolant temperature", "Electronic 
brake force distribution" and 
"Power steering" warning lamps. You must stop as soon as it is safe to do so.
Park, switch off the ignition and call a PEUGEOT 
dealer or qualified workshop.
Engine coolant 
temperature and 
level Fixed, with the needle 
in the red zone.
An abnormal increase in 
temperature.
Park and switch off the ignition, then allow to cool down.
Check the level visually.
Flashing.
A drop in the engine coolant level. Contact a PEUGEOT dealer or a qualified workshop.
Engine oil pressure 
and temperature Fixed while driving. Insufficient pressure or excessive 
temperature.
Park and switch off the ignition, then allow to cool down.
Check the level visually. For more information on 
Checking levels, refer to the corresponding section.
Fixed, even though the 
level is correct. A major fault.
Have it checked by a PEUGEOT dealer or a qualified 
workshop.
Battery charge Fixed. A fault in the charging circuit. Check the battery terminals. For more information on 
the Battery, refer to the corresponding section.
Flashing. Active functions set to standby 
(economy mode). For more information on the Battery
, refer to the 
corresponding section.
Fixed, despite the 
checks. A fault with the ignition or 
injection system. Have it checked by a PEUGEOT dealer or a qualified 
workshop.
1 
Instruments  

11
Warning/indicator lampStateCause Action/Observations
Orange warning/indicator lamps
ServiceFixed temporarily. Minor faults or warnings. Refer to the alert log on the display or screen.
For more information on the Trip computer , refer to 
the corresponding section.
Contact a PEUGEOT dealer or a qualified workshop.
Fixed.
Major faults are present.
EOBD emissions 
control system  Flashing or fixed.
There is a fault with the system.
EOBD (European On Board 
Diagnosis) is a diagnostics 
system which complies with, 
among others, the standards on 
emissions limits of:
-
 CO
 (carbon monoxide),
-
 
H
 C (unburnt hydrocarbons),
-
 
N
 Ox (nitrogen oxides), 
detected by oxygen sensors 
placed downstream of the 
catalytic converters,
-
 
particles.There is a risk of damage to the catalytic converter.
Have it checked as soon as possible by a PEUGEOT 
dealer or a qualified workshop.
Low fuel level Fixed, with the needle 
of the gauge in the 
red zone. When it first comes on, around 
8
  litres of fuel remain in the tank, 
according to your driving style 
and your engine. You must refuel as soon as possible to avoid running 
out. This warning lamp will come on every time the 
ignition is switched on, until sufficient fuel is added.
Never continue to drive until you run out of fuel as 
this could damage the emission control and injection 
systems.
Flashing. The supply is cut off following a 
serious collision. Re-establish the supply.
For more information on Fuel
, refer to the 
corresponding section.
1 
Instruments  

13
Particle filterFixed. A malfunction of the particle filter 
(level of Diesel additive, risk of 
blockage, etc.). Have the filter checked by a PEUGEOT dealer or a 
qualified workshop.
For more information on Checking levels
, refer to the 
corresponding section.
Warning/indicator lamp
StateCause Action/Observations
AdBlue
®
(BlueHDi Diesel)Fixed on switching 
on the ignition, 
accompanied by an 
audible signal and a 
message indicating the 
remaining driving range.The remaining driving range is 
between 375 and 1,500   miles 
(600 and 2,400
  km). As soon as possible, top up the AdBlue®.
+ AdBlue
®
(BlueHDi Diesel)
Flashing, associated 
with the Ser vice 
warning lamp, 
accompanied by an 
audible signal and a 
message indicating 
the remaining driving 
range. The remaining driving range is 
between 0 and 375 miles (0
  and 
6 0 0  k m).Yo u  must
 top up the AdBlue
® to avoid a breakdown .
Flashing, associated 
with the Ser vice 
warning lamp, 
accompanied by an 
audible signal and a 
message indicating 
that starting is 
prevented. The AdBlue
® tank is empty: 
the starting inhibition system 
required by regulations prevents 
starting of the engine. To be able to restart the engine, you must
 top up the 
AdBlue®.
It is essential  to add at least 5
  litres of AdBlue® to the 
corresponding tank.
For topping-up or for more information on AdBlue
®, refer to the corresponding section.
1 
Instruments  

14
Warning/indicator lampStateCause Action/Observations
+
+ SCR emissions 
control system
(BlueHDi Diesel)
Fixed on switching 
on the ignition, 
associated with the 
Service and engine 
diagnostic warning 
lamps, accompanied 
by an audible signal 
and a message. A temporary fault with the SCR 
emissions control system has 
been detected.
This alert disappears once the exhaust emissions 
return to normal levels.
Flashing on switching 
on the ignition, 
associated with 
the Ser vice and 
engine diagnostic 
warning lamps, 
accompanied by an 
audible signal and a 
message indicating 
the remaining driving 
range. After 31
  miles (50   km) travelled 
with this alert, the fault in the 
emissions control system is 
confirmed. You can continue 
driving for up to 685
  miles 
(1,100
  km) before the engine 
starting inhibition system is 
triggered. To avoid a breakdown, contact a PEUGEOT dealer 
or a qualified workshop without delay
.
Flashing on switching 
on the ignition, 
associated with the 
Service and engine 
diagnostic warning 
lamps, accompanied by 
an audible signal and a 
message indicating the 
prevention of starting of 
the engine.You have exceeded the 
authorised driving limit following 
confirmation of a fault with the 
emissions control system: the 
engine starting inhibition system 
prevents starting of the engine.To be able to restart the engine, you must
 call on a 
PEUGEOT dealer or a qualified workshop. 
Instruments