2020 AUDI R8 COUPE Owners Manual

4S1012721BA
Navigation

Find which search areas are available under
=> page 134.
You can search for online destinations using the
voice recognition system > table on page 106.
@) Tips
Always read the chapter > page 124.
NCC M mA el

Else
Applies to: vehicles with Audi connect
Import destinations from your myAudi account
into the MMI.
Requirement: You must have a registered myAudi
account at my.audi.com. You must have a vehicle
stored in your myAudi account and you must have
a destination stored.

> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.
> Select: left control button > myAudi contacts.
> If necessary, enter your myAudi user data or
your myAudi PIN. The contacts stored in myAu-
di are displayed.

— Select and confirm a contact > desired destina-
tion.
— Select and confirm Start route guidance.
G) Tips
— You only need to enter the myAudi user data
one time.
— You can receive your myAudi PIN if you have
set up a myAudi account.
— For additional information, visit my.audi.
com.
Entering a destination using geo
coordinates
> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
> page 131, fig. 118.
> Select: left control button > Geographical coor-
dinates.


— Select and confirm either Latitude or Longi-
tude.
— Turn the control knob to change the latitude/
longitude.
— Press the control knob to confirm your input.
— Select and confirm Start route guidance.
Adding a stopover
ols Valley Rd
N [ J
Yoh Me (hair b aol)
@x Ry Elias Thomas Snack Bar
~~ ney i
Delete stopover

Fig. 120 Example: active route guidance with stopover
You can enter an additional destination when
route guidance is active.
Requirement: route guidance must already be ac-
tive.

> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.

Entering a destination as a stopover
— Enter a destination in the input line @
=> page 131, fig. 118.
— Select and confirm a destination from the re-
sults list.
— Select and confirm Add as stopover.
Deleting a stopover
— Push the control knob up. Free text search and
active route guidance are displayed, or:
—
Turn the control knob to the left until the active
route guidance is shown.
— Select and confirm Delete stopover > fig. 120
under the stopover (4).
— The stopover is deleted.
Cancel route guidance
Requirement: route guidance must be active.
135

Navigation


> Press the LNAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.
> Turn the control knob to the left until the active
route guidance is shown.
> Select and confirm Delete destination
=> page 135, fig. 120. The destination is delet-
ed, or
> Select: right control button > Cancel route
guidance.


Additional options when entering a
destination
> Press the right control button.
Depending on the selected function, the follow-
ing options may be available when entering a
destination:
Cancel route guidance: Requirement: route guid-
ance must be active. Route guidance is canceled.
For additional information, see > page 135.
Map settings: > page 141.
Navigation settings: > page 137.
Voice guidance: > page 138.
Route criteria: > page 137.
Show location on map: Requirement: you must
have selected a destination from the results list.
The destination entered is displayed on the map.
Parking at this location: Requirement: you must
have selected a destination from the results list.
All parking options near the selected location are
displayed in the Infotainment system.
POIs along the route: all points of interest in the
area around the vehicle will be displayed when
route guidance is active.
Delete: the selected entry is deleted. You can de-
lete individual entries or all entries (for example,
favorites or last destinations).
Audi connect for this location!): Requirement:
you must have selected a destination from the re-
sults list. Allows you to search for items in the vi-

D_ This function is not offered in Mexico.
136
cinity of the selected location, such as City
Events or Travel information.
Online traffic data*: receiving online traffic infor-
mation > page 143 can be switched on or off.
Country/state selection: > page 132, Narrowing
the search area.
Store as favorite: > page 136.
Home address

> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.

Storing a home address
— Select and confirm Home address (2)
=> page 131, fig. 118. After opening the home
address for the first time, you will be asked to
create a home address.
— Select and confirm Create now.
— Enter a destination or select a destination from
the list.
Editing the home address
— Select Home address (2) > page 131, fig. 118.
— Select: right control button > Edit home ad-
dress.
— Select and confirm a new destination as the
home address.
The selected destination is stored as the new
home address.
Favorites

> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.

— Saving a destination as a favorite: search for
the desired destination using the input field, or
select a destination from the list. Select: right
control button > Store as favorite.
— Renaming a favorite: select the left control
button > Favorites > a favorite from the list >
right control button > Rename favorite.

4S1012721BA
Navigation

— Move favorite: select a favorite from the list >
right control button > Move favorite. Select
and confirm the location of the selected favor-
ite.
— Deleting a favorite: select a favorite from the
list > right control button > Delete favorite >
Delete this favorite or Delete all favorites.
Directory contacts
Two addresses (private/business) can be assigned
as destinations for each contact in the directory.

> Press the LNAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.
Storing a destination as a contact in the
directory
Requirement: a cell phone must be connected to
the MMI.
— Select: a destination > right control button >
Add destination to contact.
— Enter the first letters of the desired contact in
the free text search input field > page 131,
fig. 118 and then select a contact from the list.
— Select and confirm Add business destination or
Add private destination.
Additional settings
Navigation settings
> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.
> Select: right control button > Navigation set-
tings.


Depending on the selected function, the follow-
ing settings can be selected:
Show alternative routes
Up to three route suggestions and their proper-
ties are displayed on the overview map when the
function is switched on M. > page 138, Alterna-
tive routes.

) High occupancy vehicle
Low fuel warning
A message is displayed if the fuel gauge goes be-
low the reserve marking when this function is
switched on M. After confirming this message, a
list of gas stations in the area is displayed. When
a gas station is selected, route guidance from the
current vehicle position is calculated.
Notification when nearby*
The notification when nearby is switched off at
the factory.
The MMI notifies you when you are approaching
selected points of interest when this function is
switched on (MW. You can also have a Notification
tone.
Presentation mode
The Presentation mode helps you to effectively
plan a trip and follow the planned route without
moving the vehicle. You can use Select starting
point when you would like to calculate a route
starting
from a location other than the vehicle
position, for example. Start Presentation mode
to simulate route guidance.
Route criteria
10) [8]
> tak) ° [
Fig. 121 Possible route criteria

RAH-8472



> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.
> Select: right control button > Route criteria.

@ HOV lanes/carpool lanes): When the Avoid
function is used, HOV lanes or carpoollanes are >
137

Navigation

excluded from the route calculation. With Allow,
the MMI will guide you using HOV and carpool
lanes and it will indicate them.
Q@bighways / @)Toll roads / @)Ferries: you can
select the Avoid function to prevent the naviga-
tion system from calculating routes with high-
ways, toll roads or ferries, if possible.
> Press the LNAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.
> Select: right control button > Voice guidance.



Voice guidance: voice guidance can be Complete
or Shortened. With the Traffic function, voice
guidance prompts are only given when there are
traffic incidents on your route. When Off is se-
lected, no voice guidance is given.
Voice guidance during phone call: voice guidance
during a phone call can be switched on or off.
Entertainment fader: > page 172.
Voice guidance volume: > page 172.
NU Tea Melt L at)

Fig. 122 Alternative routes display
138

Requirement: a destination must be entered and
the route guidance must be started.

> Press the [NAV/MAP] button repeatedly until
the Enter destination menu is displayed
=> page 131, fig. 118.
> Select: right control button > Show alternative
routes.

Three routes will be displayed in the overview
map after you enter a destination > fig. 122.
If available, the following information will ap-
pear on the route suggestions:
— Route type (fast (@, fast alternative @), eco-
nomic route @)
— Distance to the destination and the calculated
arrival time
— Traffic congestion along the route including
time delays
The route that was calculated according to the
route criteria you selected is shown on the map.
The special properties of the route (such as ferry
connections) may be displayed (4). Additional in-
formation about individual route criteria can be
found in > page 137.

4S1012721BA
Navigation

Map
Operating the map
3 3 |
lz iz la

[RAH-8886]
TW
machen |
(ofes-Tari(el-M >] N76] @_150yd
aS) ®@
Fig. 124 Diagram: map with crosshairs turned off



> Press the LNAV/MAP] button repeatedly until @ Orientation: the map is either displayed as a
the map is displayed > fig. 124. 2D north-up map or a 2D heading-up map.
@® Scale: turn the control knob to the left or
right to decrease or increase the scale.

Zooming in/out on the map
— Turn the control knob to the left or to the right. @® Zoom: when the Automatic zoom function is
You can also zoom in or out on the map using switched on, an “A” for “Automatic” is dis-
the MMI touch = page 97, or turn the left played in the magnifying glass.
thumbwheel on the multifunction steering @ Crosshairs: move the crosshairs in the desired
wheelpagert2. direction using the MMI touch control pad
Turning the crosshairs on/off and set a point on the map as the destination
or have information about the focal point dis-
— Switching the crosshairs on: press the control
knob in the map view.
— Switching the crosshairs off: press the [BACK
button.
played.
© Map content (points of interest, favorites): if
there are multiple POIs in the immediate vi-
cinity, they will be shown stacked on the
When the crosshairs are switched on > fig. 123: map.

139

Navigation

© Additional information on the crosshairs po-
sition: if you move the crosshairs to a loca-
tion on the map, available information for
the current crosshairs position is displayed.
Press the control knob to open destination
details or to start route guidance. When the
crosshairs are turned off, the road being cur-
rently driven on is shown.
@) Display of an upcoming maneuver. If there is
no upcoming maneuver, the distance and cal-
culated arrival time to the destination/stop-
over is displayed in this location.
Display of a better route. > page 144.
When the crosshairs are switched off > fig. 124:
© Ifa turn arrow is displayed, a bar graph turns
on. The fewer the bars that are shown, the
shorter the distance is until the turn.
@ Speed display): Displays the maximum per-
mitted speed on expressways and on high-
ways.
© Road currently being driven on. When the ve-
hicle is stationary, “offroad” is displayed
here.
Vehicle location (®)
Display of active traffic information
((ONLINE}* or [TMC
Altitude display (A)
Route information: various information will
be displayed during active route guidance
(for example, the upcoming maneuver in-
cluding calculated distance and street
names). The display also provides traffic in-
formation or points of interest on the current
route.
Map functions
> Press the LNAV/MAP] button repeatedly until
the map is displayed > page 1339, fig. 124.
> Select: left control button > desired function.


®®
©®


Switch to destination input
The Enter destination menu is displayed
=> page 131, fig. 118.

D_ Only applies to vehicles without camera-based speed limit
display.
140
Traffic messages
Current traffic information is displayed in the In-
fotainment system display. > page 142.
Route list
The route list can only be displayed when route
guidance is active and contains information re-
garding the route, the names of the streets and
the length of the route sections. When traveling
on highways, possible parking lots and rest areas
are shown, which you can select as a stopover.
POIs along the route
Requirement: route guidance must be active.
Searching for points of interest along your cur-
rent route > page 134.
Additional options on the map
> Press the [NAV/MAP] button repeatedly until
the map is displayed > page 139, fig. 124.
> Press the right control button.


Depending on the function selected, the follow-
ing options can also be selected under the Map
menu:
Cancel route guidance:> page 135.
Map settings: > page 141.
Route criteria: > page 137.
Voice guidance: > page 138.
Navigation settings: > page 137.
Online traffic data*: > page 142.
Show alternative routes:> page 138.
Parking along the route: parking options near
the vehicle are displayed.
Save current position: you can save your current
vehicle position as a favorite > page 136 or save
it as a contact in the directory > page 137.
Audi connect at this location*: allows you to
search for City Events or Weather at the entered
location.

4S1012721BA
Navigation

Country information: you can display the appli-
cable urban and rural speed limits for any coun-
try/state. This information will be automatically
shown to you in the route information @)
=> page 139, fig. 124 when the speed limit is ex-
ceeded, if this function is activated > page 141.
Avoid route*: when route guidance is active, the
calculated route will avoid the area you have
specified (maximum: 12 mi (20 km)), if possible.
The navigation system calculates an alternative
route. The route to be avoided that you have en-
tered applies only to the current route and must
be set again, if needed. The areas you have se-
lected to avoid will appear with red and white
shading on the map.
> Press the [NAV/MAP] button repeatedly until
the map is displayed > page 139, fig. 124.
> Select: right control button > Map settings.


Depending on the selected function, the follow-
ing settings can be selected:
Map colors
Day/Night: the map is displayed with a light/
dark background.
Automatic: when the lights switch on, the map
colors switch from day to night.
Map display
Standard > page 139, fig. 123.
Satellite map*)) > page 142, fig. 125.
Traffic > page 142.
Map orientation
Destination map: The map shows the destination
and is oriented to the north.
2D heading-up map/2D north-up map: the cur-
rent vehicle position is displayed. The map is ori-
ented in the direction of travel or to the north.

2) AUDI AG provides access to services from third party pro-
viders. Permanent availability cannot be guaranteed, be-
cause that depends on the third party provider.
3D heading-up map: When this function is
switched on, the current vehicle position is
shown on a three-dimensional map and oriented
in the direction of travel. At a scale of 62 mi
(100 km) and larger, the map orientation is to
the north.
Overview map: the entire route from the vehicle
position to the destination or the next stopover is
displayed on the map. The map scale depends on
the length of the route and adapts automatically.
The map is oriented to the north.
Route information
The display of route information such as the cur-
rent road being driven on, upcoming maneuvers,
traffic information or points of interest along the
route can be switched on/off.
Automatic zoom
On: the map scale is adapted automatically de-
pending on the type of road being traveled (ex-
pressway, highway, other roads) so that you al-
ways have an optimal overview of the road ahead.
The scale will also be automatically adapted
when there are upcoming maneuvers to provide a
better detailed view.
Off: the map scale you have chosen is main-
tained.
Map content
Map content, such as traffic information, favor-
ites or restaurants, can be displayed or hidden
©).
141

Navigation

Satellite map
Applies to: vehicles with Audi connect
Steir ios
W Washington Blvd A
Los Angeles i ;
Fig. 125 Example: satellite map

You can display the navigation map with satellite
images.
Requirement: The requirements for Audi connect
must be met > page 124.


> Press the LNAV/MAP] button repeatedly until
the map is displayed.
> Select: right control button > Map settings >
Map display > Satellite map).

The map view is based on data packets received
from the Internet in the form of satellite images,
which are then combined with the roadways from
the Standard map view. There are two gigabytes
of memory space in the MMI memory that can be
used to temporarily store the map or navigation
data that was received. This is roughly the
amount required for the map/navigation data for
a 2,485 mile (4,000 km) route. As long as the
satellite images loaded for route guidance are

2) AUDI AG provides access to services from third party pro-
viders. Permanent availability cannot be guaranteed, be-
cause that depends on the third party provider.
142
stored, you can use them without having an ac-
tive data connection.
G) Tips
—The stored satellite map data!) can be de-
leted under Factory settings > Navigation
and online memory > page 168.
—The satellite map) is updated regularly
whenever the function is opened. The proc-
ess may take several seconds.
— When the satellite map”) display is switched
on with the 3D position map type, the map
display automatically switches to the 2D
map type when driving through tunnels.
— Always read the chapter > page 124.
— For additional information, visit www.
audiusa.com.
Accessing traffic
information
Auto rerouting (traffic)
When receiving traffic information through TMC/
online - depending on availability - you can have
the MMI navigate you around traffic incidents, if
possible.
Reception of traffic information is indicated by
the [TMC] or [ONLINE] symbol on the map
=> page 143, fig. 126.