2019 MERCEDES-BENZ CLA lights

[x] Cancel search: lights

Page 130 of 330

MERCEDES-BENZ CLA 2019  Owners Manual Deactivating or activating the ECO
start/stop function
XTo deactivate:press ECO button�C.Indicator lamp�Dgoes out.
XTo activate:press ECO button�C.Indicator lamp�Dlights up.
If indicator lamp�Dis off,

Page 132 of 330

MERCEDES-BENZ CLA 2019  Owners Manual activated. For further information about startingthe engine, see (Ypage 124).
XPress DYNAMIC SELECT button�Cas manytimes as necessary until the desired driveprogram is selected.The selected drive prog

Page 146 of 330

MERCEDES-BENZ CLA 2019  Owners Manual Additionally, children could set the vehicle in
motion if, for example, they:
Rrelease the parking brake
Rshift the automatic transmission out of park
position�]
Rstart the engine
There is a risk of a

Page 149 of 330

MERCEDES-BENZ CLA 2019  Owners Manual The ECO display consists of three sections, withan inner and outer area. The sections corre-spond to the following three categories:
�CAcceleration(evaluation of theacceleration processes):
Rthe outer

Page 150 of 330

MERCEDES-BENZ CLA 2019  Owners Manual helps you to avoid overheating the brakes andwearing them out excessively.
When you take advantage of engine braking, itis possible that a drive wheel will not rotate forsome time, e.g. on a slippery

Page 163 of 330

MERCEDES-BENZ CLA 2019  Owners Manual iIf you do not depress the accelerator pedalwithin a few seconds, RACE START is can-celed. The multifunction display shows theRACE START CanceledRACE START Canceledmessage.
XFully depress the accelera

Page 167 of 330

MERCEDES-BENZ CLA 2019  Owners Manual Problems with Parking Assist PARKTRONIC
ProblemPossible causes/consequences and�P�PSolutions
Only the red segments inthe Parking AssistPARKTRONIC warningdisplays are lit. You alsohear a warning tone f

Page 172 of 330

MERCEDES-BENZ CLA 2019  Owners Manual Rif the camera lens is dirty or obstructed.Observe the notes on cleaning(Ypage 269)
Rif the rear of your vehicle is damaged. In thiscase, have the camera position and settingchecked at a qualified spe