2019 MAZDA MODEL CX-30 service

Thank you for choosing a Mazda. We at Mazda design and build vehicles with
complete customer satisfaction in mind.

To help ensure enjoyable and trouble-free operation of your Mazda, read this
manual carefully and follow its recommendations.

Regular servicing of your vehicle by an expert repairer helps maintain both its
roadworthiness and its resale value. A world-wide network of Authorised Mazda
Repairers can help you with their professional servicing expertise.
Their specially trained personnel are best qualified to service your Mazda vehicle
properly and exactly. Also, they are supported by a wide range of highly specialized
tools and equipment specially developed for servicing Mazda vehicles. When
maintenance or service is necessary, consult an Authorised Mazda Repairer.

We assure you that all of us at Mazda have an ongoing interest in your motoring
pleasure and in your full satisfaction with your Mazda product.

Mazda Motor Corporation
HIROSHIMA, JAPAN

Important Notes About This Manual
Keep this manual in the glove compartment as a handy reference for the safe and enjoyable use of
your Mazda. Should you resell the vehicle, leave this manual with it for the next owner.

All specifications and descriptions are accurate at the time of printing. Because improvement is a con-
stant goal at Mazda, we reserve the right to make changes in specifications at any time without notice
and without obligation.


Please be aware that this manual applies to all models, equipment and options. As a result, you
may find some explanations for equipment not installed on your vehicle.

©2019 Mazda Motor Corporation
September 2019 (Print1)
A Word to Mazda Owners

Mazda Radar Cruise
Control (MRCC)
*
▼Mazda Radar Cruise Control
(MRCC)
The MRCC system is designed to
maintain headway control*1 with a
vehicle ahead according to your
vehicle's speed using a front radar
sensor to detect the distance to the
vehicle ahead and a preset vehicle
speed without you having to use the
accelerator or brake pedals.
*1 Headway Control: Control of the
distance between your vehicle and
the vehicle ahead detected by the
MRCC system.
Additionally, if your vehicle starts
closing in on the vehicle ahead such as
if the vehicle ahead brakes suddenly, a
warning sound and a warning
indication in the display are activated
simultaneously to alert you to maintain
a sufficient distance between the
vehicles.
Also refer to the following before using
the MRCC.
xFront radar sensor (page 4-220)
WARNING
Do not rely completely on the MRCC:
The MRCC system has detection
limitations depending on the type of
vehicle ahead and its conditions, the
weather conditions, and the road
conditions. Additionally, the system
may be unable to decelerate
sufficiently to avoid hitting the vehicle
ahead if the vehicle ahead applies the
brakes suddenly or another vehicle
cuts into the driving lane, which could
result in an accident.
Always drive carefully and verify the
surrounding conditions and depress
the brake pedal or accelerator pedal
while keeping a safe distance from
vehicles ahead or on-coming vehicles.
Do not use the MRCC system in the
following locations. Using the MRCC
system at the following locations may
result in an unexpected accident:
¾General roads other than highways
(Driving under these conditions
using the MRCC system is not
possible.)
¾Roads with sharp curves and where
vehicle traffic is heavy with
insufficient space between vehicles,
or roads where frequent and
repetitive acceleration and
deceleration occur (Driving under
these conditions using the MRCC is
not possible).
¾When entering and exiting
interchanges, service areas, and
parking areas of highways (If you exit
a highway while headway control is
in use, the vehicle ahead will no
longer be tracked and your vehicle
may accelerate to the set speed).
¾Slippery roads such as ice or
snow-bound roads (Tyres could spin
causing you to lose vehicle control,
or the stop hold control may not
operate.)
¾Long , descending slopes (to
maintain distance between vehicles,
the system automatically and
continuously applies the brakes
which could result in the loss of
brake power.)
¾Slopes with a steep gradient (The
vehicle ahead may not be detected
correctly.)
¾Two-wheeled vehicles such as
motorcycles or bicycles are ahead.
When Driving
i-ACTIVSENSE
4-130*Some models.

¾When entering and exiting
interchanges, service areas, and
parking areas of highways (If you exit
a highway while headway control is
in use, the vehicle ahead will no
longer be tracked and your vehicle
may accelerate to the set speed).
¾Slippery roads such as ice or
snow-bound roads (Tyres could spin
causing you to lose vehicle control,
or the stop hold control may not
operate.)
¾Long , descending slopes (to
maintain distance between vehicles,
the system automatically and
continuously applies the brakes
which could result in the loss of
brake power.)
¾Slopes with a steep gradient (The
vehicle ahead may not be detected
correctly, your vehicle may slide
while stopped by the stop hold
control, and it may accelerate
suddenly after it starts moving.)
¾Two-wheeled vehicles such as
motorcycles or bicycles are ahead.
For safety purposes, switch the MRCC
with Stop & Go function system off
when it is not being used.
Leaving the MRCC with Stop & Go
function system turned on when it is
not in use is dangerous as it could
operate unexpectedly, resulting in an
accident.Do not get out of the vehicle while
the stop hold control is operating:
Getting out of the vehicle while the
stop hold control is operating is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Before getting out of the vehicle,
switch the MRCC with Stop & Go
function system off, shift the selector
lever to the P position, and apply the
parking brake.
CAUTION
¾If your vehicle is towed or you are
towing something, switch the MRCC
with Stop & Go function system off
to prevent an unexpected operation.
¾Turn the system off when the vehicle
is running on a chassis roller.
NOTE
xThe MRCC with Stop & Go function
system does not detect the following
as physical objects.
xVehicles approaching in the
opposite direction
xPedestriansxStationary objects (stopped
vehicles, obstructions)
xIf a vehicle ahead is travelling at an
extremely low speed, the system may
not detect it correctly.
xIf there is a structure on the road or
an object (such as a monorail) at a
low height off the ground in front of
the vehicle, the system may operate.
Therefore, do not use the MRCC
with Stop & Go function.
xDo not use the MRCC with Stop &
Go function system under conditions
in which close proximity warnings
are frequently activated.
When Driving
i-ACTIVSENSE
4-140

¾The CTS may not be able to detect a
vehicle ahead depending on the type
of vehicle ahead and its conditions,
the weather conditions, and the road
conditions. Additionally, the system
might be unable to decelerate
sufficiently if a vehicle ahead applies
the brakes suddenly, another vehicle
cuts into the driving lane, or the
difference in vehicle speed between
your vehicle and the vehicle ahead is
larger, which could result in an
accident. Check the surrounding
conditions and always drive carefully
while keeping a safe distance from
vehicles ahead and on-coming
vehicles.

For the purposes of safety, switch the
CTS off when it is not being used.
Leaving the CTS turned on when it is
not in use is dangerous as it could
operate unexpectedly, resulting in an
accident.

Do not use the CTS under the
following conditions. Otherwise, it
may result in an accident.
¾General roads other than
expressways or highways (Driving
under these conditions using the CTS
is not possible.)
¾Roads with sharp curves and where
vehicle traffic is heavy with
insufficient space between vehicles,
or roads where frequent and
repetitive acceleration and
deceleration occur (Driving under
these conditions using the CTS is not
possible).¾When entering and exiting
interchanges, service areas, and
parking areas of expressways (If you
exit an expressway while headway
control is in use, the vehicle ahead
will no longer be tracked and your
vehicle may accelerate to the set
speed).
¾Slippery roads such as icy or
snow-covered roads (Tyres could
spin causing you to lose vehicle
control, or the stop hold control may
not operate.)
¾Long , descending slopes (to
maintain distance between vehicles,
the system automatically and
continuously applies the brakes
which could result in the loss of
brake power.)
¾Two-wheeled vehicles such as
motorcycles or bicycles are ahead.
¾(Automatic transmission vehicle)
Slopes with a steep gradient (The
vehicle ahead may not be detected
correctly, your vehicle may slip while
stopped by the stop hold control, or
it may accelerate suddenly after it
starts moving.)
¾Driving under bad weather
conditions (rain, fog , and snow).
¾The vehicle is driven on slippery
roads such as icy or snow -covered
roads and unpaved roads (Tyres
could spin causing you to lose
vehicle control, or the stop hold
control may not operate.)
¾Tyres of a different specified size are
used, such as a temporary spare tyre.
¾Tyres with insufficient tread are used.
¾The tyre pressures are not adjusted to
the
specified pressure.
¾The vehicle is being used to tow a
camper or boat trailer.
¾Tyre chains are used.
When Driving
i-ACTIVSENSE
4-149

What is Mazda Connect ?
▼What is Mazda Connect ?
This manual only indicates a part of the information for Mazda Connect. For details,
check the Web owner's manual at the Mazda site for each country and region.

1. Radio
2. Bluetooth® Audio/Hands-Free Call/SMS (Short Message Service)
3. USB Audio/USB Video
4. USB port
*1/SD card slot*2
5. CD/DVD player*
6. CD/DVD
7. SD card (Navigation system)*
*
1 The location of the USB slot differs depending on the vehicle model.*2 The SD card slot is for the navigation system only. For vehicles with the
navigation system, the SD card (Mazda genuine) with stored map data is
inserted into the SD card slot and used.
Interior Features
Mazda Connect
*Some models.5-13

No. Item Explanation
4
Vo l u m e k n o b :

Volume adjustment
Adjust the volume by turning the volume knob.
If you adjust the volume during a voice guidance, the volume of the voice guidance changes.
If you adjust the volume while making a hands-free call, the conversation volume changes.
Press the volume knob to mute the audio. Press the knob again to cancel.

Po we r
off
Press and hold the volume knob to turn the Mazda Connect power off.
NOTE
If you press the volume knob to mute an audio source which can be
paused, such as Apple CarPlay, USB audio, or Bluetooth® audio, while
it is playing, the song playback pauses. Press the volume knob again to
cancel the mute and the pause at the same time.

Selecting a radio station
(FM/AM radio)
Radio stations saved to your Favourites can be selected by sliding the volume knob left (SEEK
DOWN)/right (SEEK UP) while listening to FM/AM. The station will change each time you
slide the volume knob.
If you want to manually tune to the next available station before or after the currently selected
station, slide and hold the volume knob left (SEEK DOWN) or right (SEEK UP) until you hear
a beep and the tuner will select the next available station.
(DAB radio)*
You can call up radio stations registered to your Favourites by sliding the volume knob left/right
while listening to DAB radio. The radio stations change each time you slide the volume knob.
In addition, the service switches to the next service when you continue sliding the knob to the
right until you hear a beep, and it switches to the previous service when you continue sliding
the knob to the left. If there is no next or previous service in the selected Ensemble, Ensemble
switches.

Playback Control
Music and video files can be cued when listening to stored content via USB, Bluetooth®, and
audio or video.
Slide the volume knob right to skip to the next track or slide it to the left to go back to the
previous track. You can also slide and hold the volume knob to fast forward or rewind the
track.
Interior Features
Mazda Connect
*Some models.5-19

▼Audio Remote Control Switch Operation
The audio remote control switch is on the left side of the steering wheel. You can
operate basic audio functions, pick up/hang up the phone, or activate voice
control using the switch.
The shape of the switches may
differ depending on the vehicle model.

No. Item Explanation
1
Volume adjustment button:
Press the (+) or (-) button to adjust the volume.
If you adjust the volume during a voice guidance, the volume of the
voice guidance changes.
If you adjust the volume while making a hands-free call, the conversa-
tion volume changes.
2
Seek Switch:

Selecting a radio station
(FM/AM radio)
You can call up radio stations registered to your favourites by pressing
the seek switch while listening to FM/AM radio. The radio stations
change each time you press the switch.
In addition, press and hold the seek switch until you hear a beep to
start automatic station selection. It stops when a radio broadcast is
tuned in.
(DAB radio)
*
You can call up radio stations registered to your Favourites by pressing
the seek switch while listening to DAB radio. The radio station changes
each time you press the seek switch.
In addition, if you press and hold the seek switch until you hear a
beep, the service switches to the next or previous service. If there is no
next or previous service in the selected Ensemble, Ensemble switches.

Cuing
Interior Features
Mazda Connect
*Some models.5-21

xTune to {Frequency} FM {Frequency} FMxTune to DAB {DAB Station Name} {DAB Station Name}
Source
xChange Source (You can also use “Change Source to USB”*1 and “USB”*1.)xAudio OFF (You can also use “Change Source to Audio OFF”.)
Phone
xDial Phone Number (You can also use “Dial {Phone Number} {Phone Number}”.)xCall HistoryxCall a Contact (You can also use “Call {Contact Name} {Contact Name}” and “Call
{Contact Name} at {Number Type} {Contact Name} at {Number Type}”.)
xRedial
*1 : Audio source names other than “USB” can also be used as follows:
Bluetooth/AM/FM/DAB/Disc/USB1 Audio/USB2 Audio/USB1 Video/USB2
Video
NOTE
xSome commands may not be usable depending on the region and equipment.xSome commands cannot be used depending on the device connection conditions
and the use conditions.
▼Appendix
Gracenote® Database
When audio CDs are played, the unit searches the database stored in the vehicle for
the album name, artist name, genre, title, and album art, and if there is a match in
the vehicle's database compilation to the music being played, each type of music
information is automatically added (Album art only for MP3/WMA/AAC CDs and
when playing USB audio and Bluetooth
® audio). The database information stored in
this device uses database information in the Gracenote® music recognitions service.
Interior Features
Mazda Connect
5-26