2019 MAZDA MODEL CX-30 warning light

7If Trouble Arises
Helpful information on what to do if a problem arises with the
vehicle.
Emergency Call System.............. 7-2
Emergency Call System
*.......... 7-2
Mazda ERA-GLONASS............. 7-12
Mazda ERA-GLONASS
*........ 7-12
Parking in an Emergency.......... 7-23
Parking in an Emergency....... 7-23
Roadside Emergency Triangle
Retaining Strap
*................... 7-23
Flat Tyre................................. 7-24
Spare Tyre and Tool
Storage............................... 7-24
Emergency Flat Tyre Repair Kit
*.....
.......................................... 7-27
Changing a Flat Tyre (With Spare
Tyre)................................... 7-33
Battery Runs Out..................... 7-39
Jump-Starting...................... 7-39
Emergency Starting................. 7-42
Starting a Flooded Engine
(SKYACTIV-G 2.0, SKYACTIV-G
2.5 and
SKYACTIV-X 2.0)..... 7-42
Push-Starting....................... 7-42
Running Out of Fuel (SKYACTIV-D
1.8).................................... 7-43
Overheating........................... 7-44
Overheating........................ 7-44
Emergency Towing.................. 7-46
Towing Description.............. 7-46
Towing Hooks......................7-47
Warning/Indicator Lights and
Warning Sounds..................... 7-49
If a Warning Light Turns On or
Flashes................................ 7-49
Message Indicated on Multi-
information Display............. 7-63
Warning Sound is
Activated.............................7-67
When Liftgate Cannot be
Opened................................. 7-73
When Liftgate Cannot be
Opened.............................. 7-73
Active Driving Display Does Not
Operate................................. 7-74
If the Active Driving Display Does
Not Operate........................ 7-74
Windscreen Wipers Operate at High
Speed.................................... 7-75
Windscreen Wipers Operate at
High Speed......................... 7-75
*Some models.7-1

xThe 112-based Emergency call system in-vehicle system is activated by default. It is
activated automatically by means of in-vehicle sensors in the event of a severe
accident.
xThe 112-based Emergency call system in-vehicle system can also be triggered
manually.
xIn the event of a critical system failure that would disable the 112-based
Emergency call system in-vehicle system, the following warning will be given to the
occupants of the vehicle:
xIf a problem occurs with the Emergency call system, the indicator light on the
Emergency call switch turns on in red and a beep sound is activated 3 times.
Thereafter, if the indicator light remains turned on in red, the system will not
operate normally in an emergency. Have the vehicle inspected at an Authorised
Mazda Repairer as soon as possible.
INFORMATION ON DATA PROCESSING
xAny processing of personal data through the 112-based Emergency call system
in-vehicle system shall comply with the personal data protection rules provided for
in Directives 95/46/EC(1) and 2002/58/EC(2) of the European Parliament and
of the Council, and in particular, shall be based on the necessity to protect the
vital interests of the individuals in accordance with Article 7(d) of Directive
95/46/EC(3).
xProcessing of such data is strictly limited to the purpose of handling the Emergency
call system to the single European emergency number 112.
Types of data and its recipients
xThe 112-based Emergency call system in-vehicle system may collect and process
only the following data:
xVehicle
Identification NumberxVehicle type (passenger vehicle or light commercial vehicle)xVehicle propulsion storage type (petrol/diesel/CNG/LPG/electric/hydrogen)xVehicle last three locations and direction of travelxLog file of the automatic activation of the system and its timestampxRecipients of data processed by the 112-based Emergency call system in-vehicle
system are the relevant public safety answering points designated by the respective
public authorities of the country on which territory they are located, to
first receive
and handle emergency calls (Emergency call system) to the single European
emergency number 112.
Arrangements for data processing
xThe 112-based Emergency call system in-vehicle system is designed in such a way
as to ensure that the data contained in the system memory is not available outside
the system before an Emergency call system is triggered.
xThe 112-based Emergency call system in-vehicle system is designed in such a way
as to ensure that it is not traceable and not subject to any constant tracking in its
normal operation status.
If Trouble Arises
Emergency Call System
7-3

After that, perform the following procedure.
Move the signal lever up to right
turn
Move the signal lever up to right
turnMove the signal lever
down to left turn
Move the signal lever down
to left turn Return the signal lever to offReturn the signal lever to
Return the signal lever to off
Return the signal lever to off Return the signal lever to off Move the signal lever up to right
turnWithin 5 seconds
Within 1 second Within 1 second Within 1 second Within 1 second
Within 1 second
Within 1 second
Within 1 second
Within 1 second Within 5 seconds
Within 5 seconds
Within 1 second Turn on the hazard warning
lights.
Turn off the hazard warning
lights.
Both red and green
Emergency call switch
indicator lights turn on.
Press the Emergency call
switch for one second or
longer and release it.
After the procedure is completed, the test mode is performed in the following order
automatically.
1. Procedure is completed
2. Switch to test mode
If Trouble Arises
Mazda
ERA-GLONASS
7-21

Parking in an Emergency
▼Parking in an Emergency
The hazard warning lights should
always be used when you stop on or
near a roadway in an emergency.

The hazard warning lights warn other
drivers that your vehicle is a traffic
hazard and that they must take
extreme caution when near it.

Depress the hazard warning flasher
and all the direction indicators will
flash. The hazard warning indicator
lights in the instrument cluster flash
simultaneously.
NOTE
xThe direction indicators do not work
when the hazard warning lights are
on.
xCheck local regulations about the
use of hazard warning lights while
the vehicle is being towed to verify
that it is not in violation of the law.
Roadside Emergency
Triangle Retaining Strap
*
▼Roadside Emergency Triangle
Retaining Strap
Keep the roadside emergency triangle
in the right side trim and secure it with
the strap.
1. Strap
If Trouble Arises
Parking in an Emergency
*Some models.7-23

Ty p e E
1. Jack lever
2. Spare tyre hold-down bolt
3. Screwdriver
*
4. Towing eyelet
5. Jack
6. Spare tyre
7. Wrench
*
8. Wheel brace
▼Jack*
To remove the jack
1. Remove the luggage mat.

2. Remove the jack.

To secure the jack
Perform the removal procedure in
reverse.
Maintenance
xAlways keep the jack clean.xMake sure the moving parts are kept
free from dirt or rust.
xMake sure the screw thread is
adequately lubricated.
▼Spare Tyre*
Your Mazda has a temporary spare
tyre.
The temporary spare tyre is lighter and
smaller than a conventional tyre, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tyres should
NEVER be used for long drives or
extended periods.
WARNING
Do not install the temporary spare
tyre on the front wheels (driving
wheels):
Driving with the temporary spare tyre
on one of the front driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound roads,
and have an accident. Move a regular
tyre to the front wheel and install the
temporary spare tyre to the rear.
CAUTION
¾When using the temporary spare
tyre, driving stability may decrease
compared to when using only the
conventional tyre. Drive carefully.
¾To avoid damage to the temporary
spare tyre or to the vehicle, observe
the following precautions:
If Trouble Arises
Flat Tyre
*Some models.7-25

Emergency Flat Tyre
Repair Kit
*
▼Emergency Flat Tyre Repair Kit
The emergency flat tyre repair kit
included with your Mazda is for a
temporary repair of a slightly damaged
flat tyre resulting from running over
nails or similar sharp objects on the
road surface.
Perform the emergency
flat tyre repair
without removing the nail or similar
sharp object which punctured the tyre.
NOTE
Your vehicle is not equipped with a
spare tyre. In the event of a flat tyre,
use the emergency flat tyre repair kit to
repair the tyre temporarily. When
doing the repair, refer to the
instructions included in the emergency
flat tyre repair kit. If an emergency
repair was performed on a flat tyre
using the emergency flat tyre repair kit,
have an , repair or replace the tyre as
soon as possible.
▼About the Emergency Flat Tyre
Repair Kit
The emergency flat tyre repair kit
includes the following items.

1. Tyre sealant
2. Injection hose
3. Compressor
4. Spare valve core
5. Valve core tool
6. Instructions
7. Speed restriction sticker
WARNING
Do not allow children to touch the
tyre sealant:
¾Ingestion of tyre sealant is
dangerous. In the event tyre sealant
is accidentally swallowed, drink large
amounts of water immediately and
seek medical assistance.
If Trouble Arises
Flat Tyre
*Some models.7-27

xIf the tyre does not inflate, repair
of the tyre may not be possible. If
the tyre does not reach the
correct inflation pressure within a
10-minute period, it probably has
received more extensive damage.
When this happens, the
emergency flat tyre repair kit
cannot be used to repair the tyre.
Contact an expert repairer (we
recommend an Authorised
Mazda Repairer).
xIf the tyre has been over-inflated,
loosen the screw cap on the
compressor and bleed some of
the air out.
16.When the tyre has been inflated to
the proper inflation pressure, turn
the compressor switch off and
remove the compressor hose from
the tyre valve.
17.Install the tyre valve cap.
18.Put the emergency flat tyre repair
kit in the luggage compartment and
continue driving.
CAUTION
¾Drive carefully to an expert
repairer (we recommend an
Authorised Mazda Repairer) and
keep the vehicle speed below 80
km/h (50 mph).
¾If the vehicle is driven 80 km/h
(50 mph) or higher, the vehicle
might begin to vibrate.
NOTE
If the tyre is not properly inflated,
the tyre pressure monitoring system
warning light will illuminate (page
7-60).
19.After driving the vehicle for 10
minutes or 5 km (3 miles), check
the tyre pressure with the tyre
pressure gauge equipped with the
compressor. If the tyre pressure has
fallen below the correct tyre
pressure, inflate the tyre to the
correct pressure again following the
steps from number 14.
CAUTION
¾If the tyre
inflation pressure falls
below 130 kPa (1.3 kgf/cm2 or
bar, 18.9 psi), repair cannot be
done with the repair kit. Park the
vehicle on a level surface off the
right-of-way and contact an
expert repairer (we recommend
an Authorised Mazda Repairer).
¾If the tyre inflation pressure
continues to remain low after
repeating steps 13 to 20, park the
vehicle on a level surface
off the
right-of-way and contact an
expert repairer (we recommend
an Authorised Mazda Repairer).
NOTE
When checking the tyre inflation
pressure with the tyre pressure
gauge on the compressor unit,
make sure the compressor switch is
turned off.
20.The emergency flat tyre repair is
completed if the tyre air pressure
does not decrease. Drive the
vehicle carefully to the nearest
expert repairer (we recommend an
Authorised Mazda Repairer)
promptly and have the tyre
replaced. Mazda recommends that
the tyre be replaced with a new
one. If the tyre is to be repaired and
reused, consult an expert repairer
(we recommend an Authorised
Mazda Repairer).
Peel off the speed restriction sticker
after replacing the tyre.
If Trouble Arises
Flat Tyre
7-32

If a Warning Light Turns
On or Flashes
▼If a Warning Light Turns On or
Flashes
If any warning light turns on/flashes,
take appropriate action for each light.
There is no problem if the light turns
off, however if the light does not turn
off or turns
on/flashes again, consult
an expert repairer (we recommend an
Authorised Mazda Repairer).
The details for some warnings can be
viewed on the centre display or
multi-information display in the
instrument cluster.
Centre display
1. Select “Information” on the home
screen.
2. Select “Vehicle Status Monitor”.
3. Select the applicable warning to
view the warning details.
NOTE
You can also display the currently
occurring warning by sliding the
commander knob to the left while on
the home screen of the centre display.
Multi-information display
1. Press the INFO switch on the
steering switch to display the
warning indication screen.
Refer to Multi-information Display
on page 4-23.
▼Brake System Warning Indication/
Warning Light (Red)
This warning has the following
functions:
Warning light inspection
For an operation check, make sure that
the light turns on when the ignition is
switched on, and turns off a few
seconds later or when the engine is
started.
When the light turns on
If the brake system warning light
remains illuminated the brake fluid
may be low or there could be a
problem with the brake system. Park
the vehicle in a safe place immediately
and contact an expert repairer (we
recommend an Authorised Mazda
Repairer).
Refer to Inspecting Brake/Clutch Fluid
Level on page 6-30.
WARNING
Do not drive with the brake system
warning light illuminated. Contact an
expert repairer (we recommend an
Authorised Mazda Repairer) to have
the brakes inspected as soon as
possible:
Driving with the brake system warning
light illuminated is dangerous. It
indicates that your brakes may not
work at all or that they could
completely fail at any time. If this light
remains illuminated, after checking
that the parking brake is fully released,
have the brakes inspected
immediately.
CAUTION
¾In addition, the
effectiveness of the
braking may diminish so you may
need to depress the brake pedal
more strongly than normal to stop
the vehicle.
¾(With M Hybrid)
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-49