Page 409 of 514
NOTElWrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
cover.
3. Remove the socket and bulb assembly
by turning it anticlockwise.
4. Remove the bulb by pulling it out.
5. To install the bulb, perform the removal
steps in reverse.
NOTEl When installing the lid, align the tab on the
lid with the hole on the vehicle side.Licence plate lamps
E01004602093
1. When removing the lamp unit (A), push
it towards the left side of the vehicle body.
2. Remove the socket (B) and bulb assem-
bly by turning it anticlockwise.
Replacement of lamp bulbs
10-35OGAE18E1Maintenance10
Page 410 of 514
3. Remove the bulb by pulling it out.
4.To install the bulb, perform the removal
steps in reverse.
NOTEl When installing the lamp, insert tab (C) first
then align and insert tab (D).High-mounted stop lamp
E01004500593
NOTEl An LED, not a bulb, is used in the high-
mounted stop lamp.
Contact a MITSUBISHI MOTORS Author-
ized Service Point when there is a need for
repair or replacement.
Replacement of lamp bulbs
10-36OGAE18E1Maintenance10
Page 411 of 514
Vehicle labeling................................................................................ 11-02
Vehicle dimensions........................................................................... 11-04
Vehicle performance......................................................................... 11-06 Vehicle weight.................................................................................. 11-07
Engine specifications........................................................................ 11-10
Electrical system............................................................................... 11-11
Tyres and wheels...............................................................................11-12
Fuel consumption.............................................................................. 11-12
Refill capacities................................................................................. 11-15Specifications
OGAE18E111
Page 412 of 514
Vehicle labelingE01100105207
Vehicle identification number
The vehicle identification number is stamped on the bulkhead as shown in the illustration.
Vehicle information code plate
The vehicle information code plate is riveted as shown in the illustration.
The plate shows model code, engine model,
transmission model and body colour code, etc.
Please use this number when ordering re-
placement parts.
1- Model code
2- Engine model code
3- Transmission model code
4- Body colour code
5- Interior code
6- Option code
7- Exterior code
Vehicle labeling
11-02OGAE18E1Specifications11
Page 413 of 514
Vehicle identification numberplate (RHD vehicles only)
The vehicle identification number is stamped on the plate riveted to the left front corner of the vehicle body. It is visible from outside of
the vehicle through the windscreen.
Engine model/number
The engine model and number are stamped on the engine cylinder block as shown in the
illustrations.
Petrol-powered vehicles1600 models
*: Front of the vehicle
*: Front of the vehicle
Diesel-powered vehicles
*: Front of the vehicle
*: Front of the vehicle
Vehicle labeling
11-03OGAE18E1Specifications11 2000 models 1600 models 2200 models
Page 414 of 514
Vehicle dimensionsE01100204995
Vehicle dimensions
11-04OGAE18E1Specifications11Except for vehicles equipped with wheel lip moldings
Vehicles equipped with wheel lip moldings
Page 415 of 514
ItemVehicles for Russia, Kazakhstan,Moldova and UkraineExcept for vehicles for Russia,
Kazakhstan, Moldova and Uk- raineVehicles with16 or 17 inch tyreVehicles with18 inch tyreVehicles with16 or 17 inch tyreVehicles with18 inch tyre1Front track1,525 mm1,540 mm1,525 mm1,545 mm2Overall widthWithout wheel lip molding——1,770 mm—With wheel lip molding1,810 mm―1,810 mm3Front overhang930 mm4Wheel base2,670 mm5Rear Overhang765 mm6Overall length4,365 mm
7Ground clearance (unla-
den)
Petrol-powered vehicles195 mm215 mm180 mm,
190 mm *190 mmDiesel-powered vehicles——170 mm,
180 mm *180 mm8Overall height (unladen)1,630 mm1,645 mm1,630 mm,
1,640 mm *1,640 mm9Rear track1,530 mm1,540 mm1,530 mm1,545 mmMinimum turning radiusBody5.7 mWheel5.3 m*
: 215/70R16 size tyre
Vehicle dimensions
11-05OGAE18E1Specifications11
Page 416 of 514
NOTElThe overall width varies depending on whether the vehicle is equipped with wheel lip moldings.
To determine whether your vehicle is equipped with wheel lip moldings, refer to “Exterior” on page 1-12.
Vehicle performance
E01100304228Petrol-powered vehiclesMaximum speed1600 models183 km/h (114 mph)2000 models191 km/h (119 mph)Diesel-powered vehicles
Maximum speed1600 models2WD182 km/h (113 mph)4WD180 km/h (112 mph)2200 models190 km/h (118 mph)
Vehicle performance
11-06OGAE18E1Specifications11