2018 MERCEDES-BENZ GLC Owners Manual

Page 129 of 390

MERCEDES-BENZ GLC 2018  Owners Manual i Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odors or when
in a tunnel. The windows could otherwise fog
up, since no fresh air is drawn into the vehicle
in air-recir

Page 130 of 390

MERCEDES-BENZ GLC 2018  Owners Manual Activating/deactivating X
Press th e �Z rocke r switch up or down .
The indicator lamp abov e th e rocke r switch lights up or goe s out .
Problems with the "Cooling with air dehumidification"

Page 131 of 390

MERCEDES-BENZ GLC 2018  Owners Manual Dual-zone automati c climat e contro lGeneral notes You can selec t differen t temperature setting s
fo r th e driver's and front-passenger sides as well
as fo r th e rea r compartment.
Setting th

Page 132 of 390

MERCEDES-BENZ GLC 2018  Owners Manual Activating/deactivating Dual-zone automatic climat e controlX
Press th e 0 rocke r switch up or down .
The indicator lamp abov e th e 0 rocke r
switch lights up or goe s out .
The synchronization func

Page 133 of 390

MERCEDES-BENZ GLC 2018  Owners Manual Problems with the rear window defroster Problem
Possible causes/consequences and �P Solutions
The rear window
defroster has deactiva-
ted prematurely or can-
not be activated. The battery has not been

Page 134 of 390

MERCEDES-BENZ GLC 2018  Owners Manual X
To deactivate: press the ! rocker switch
up or down.
The indicator lamp above the ! rocker
switch goes out.
Residual heat is deactivated automatically: R
after approximately 30 minutes R
when the ig

Page 135 of 390

MERCEDES-BENZ GLC 2018  Owners Manual X
To refill the perfume vial: unscrew the lid of
the empty perfume vial to refill it yourself. X
Fill the perfume vial with a maximum of
0.5 fl. oz. (15 ml) of the desired liquid per-
fume. X
Screw th

Page 136 of 390

MERCEDES-BENZ GLC 2018  Owners Manual Setting the air vents Air vents are located: R
on the left and right-hand side of the dash-
board R
in the middle of the dashboard R
in the rear center console, depending on the
equipment installed
Si