2018 MERCEDES-BENZ G-CLASS SUV ECU

1
Stow age compartment in the doors
2 Stow age/telephone compartment in the
armrest with multimedia and USB ports as
we ll as stow age space, e.g. for an MP3
pla yer
3 Stow age compartment in the front cent re
console
4 Glove compa rtment Locking and unlo
cking thegl ove box #
Turn the emer gency key a quarter turn clock‐
wise 2(to lock) or anti-clockwise 1(to
unlock). Opening
the spectacles compa rtment #
Press button 1. Opening the through-loading
feature in the
re ar comp artment &
WARNING Risk of inju ryfrom unsecu red
items in theve hicle
If objects, luggage or loads are not secured
or not secured suf ficientl y,they could slip,
tip ove r or be throw n around and thereby hit
ve hicle occupants. 100
Seats and stowing

There is a
risk of injur y,particularly in the
ev ent of sudden braking or a sudden change
in direction. #
Alw aysstow objects in such a wayth at
th ey cannot be thro wn around. #
Before the journe y,secure objects, lug‐
ga ge or loads against slipping or tipping
ove r. Obser
vethe no tes on loading theve hicle. Through-loading
feature with out load com‐
pa rtment co ver #
Fold down there ar armrest. #
Pull the cent rehead restra int of there ar
ben chseat fully upwards. #
Slide there lease cat ch1 tothe left. #
Swivel theflap 2 tothe left until it comes to
re st on there ar side of there ar ben chseat. #
Push the co ver3 forw ards until it comes to
re st on there ar armrest.
Th rough-loading feature with load compart‐
ment co ver #
Foldthe seat backrest forw ards
(/ page 104). Seats and
stowing 101

Re
ar seat backrests Ad
justing the angle of the rear seat backr‐
ests &
WARNING Risk of inju ryifth ere ar
ben chseat/rear seat and seat backrest
are not engaged
If th ere ar ben chseat/rear seat and seat
backrest are not engaged they could fold for‐
wa rds, e.g. when braking suddenly or in the
ev ent of an accident.
R Ifth is is the case, theve hicle occupant
wo uld be forc ed into the seat belt bythe
re ar ben chseat/rear seat or bythe seat
backrest. The seat belt cann otprotect as
intended and could result in additional
injur y.
R Objects or loads in the boot/load com‐
partment cann otbe restra ined bythe
seat backrest. #
Make sure that the seat backrest and
th ere ar ben chseat/rear seat are
engaged before everytrip. Yo
u can adjust the angle of there ar seat backr‐
ests. There are se veral possible de tent positions. #
Pull the left or right release le ver1 inthe
direction of the ar row and hold it in position. #
Movethe seat backrest 2tothe desired
angle. #
Let go of there lease le ver1. #
Ensure that the seat backrest is engaged. Load compartment co
ver Extending/r
etra cting the load compa rtment
co ver &
WARNING Risk of inju ryor death due to
objects being poorly secured
On its own,the load compartment co ver can‐
not secure or restra in heavy objects, items of
luggage and heavy loads.
Yo u could be hit byan unsecured load during
sudden changes in direction, braking or in
th eev ent of an accident. #
Alw aysstow objects in such a wayth at
th ey cannot be thro wn around. #
Secure objects, luggage or loads
against slipping or tipping over,e.g. by
using lashing material, even if you are
using the load compartment co ver. 104
Seats and stowing

*
NO
TEDama getothe load compartment
co ver when loading theve hicle The load compartment co
ver may be dam‐
aged when loading theve hicle. #
Do not place any objects abo vethe
lo we r edge of the side windo wsor on
th e load compartment co ver. The load compartment co
ver is attached behind
th e seat backrest of there ar ben chseat. #
Toextend: pull load compartment co ver1
back bygrab handle 2until it engages. #
Toretract: pushthere ar edge of the load
compartment co ver1 down wards.
The load compartment co ver1 auto mati‐
cally mo vesfo rw ards.
Fo r easier loading, the load compartment co ver
can be folded upwards.
Fi tting and removing the load co mpartment
co ver
Re quirements:
R The load compartment co ver is retracted. #
Toremo ve: press in the end cap of the load
compartment co ver1 ontheright- or left-
hand side. #
Push the load compartment co ver1 into
th ere cess 2onthe opposite side. #
Take the load compartment co ver1 out by
pulling it upwards. #
Toinstall: placethe load compartment co ver
1 into there cess 2ontheright- or left-
hand side. #
Press in the end cap of the load compart‐
ment co ver1 onthe opposite side and
insert the load compartment co ver1 into
th eot her recess 2. #
Slide the end cap outwards. At
taching/rem oving the pa rtition net &
WARNING Risk of inju ryor death due to
objects being poorly secured
On its own,the partition net cann otsecure
or restra in heavy objects, items of luggage
and heavy loads. Seats and
stowing 105

Yo
u could be hit byan unsecured load during
sudden changes in direction, braking or in
th eev ent of an accident. #
Alw aysstow objects in such a wayth at
th ey cannot be thro wn around. #
Secure objects, luggage or loads
against slipping or tipping over,e.g. by
using lashing material, even when you
are using the partition net. Fo
r saf etyre asons, alw ays use a partition net
when transporting a load.
Damaged partition nets can no longer fulfil their
pr otective functions and must be replaced. Visit
a qu alified specialist workshop. Pa
rtition net without load compartment enlar ge‐
ment Pa
rtition net with load compartment enlar gement #
Extend and unfold the partition net.
The joints on theto p and bottom guide rods
will engage audibly. #
Toattach: attachthe guide rod1 onthe
ro of lining tothe holders 2. #
Enga gethe hooks 3inthe tie-down eyes
4 onthe left and right. 106
Seats and stowing

#
Pull at the loose ends of the lashing stra ps
until the partition net is tight. #
After driving a short dis tance, check thete n‐
sion of the partition net and re-tension it if
necessa ry. #
Toremo ve: pull the belt clamp 5upwards
until the tie-down stra ps are loose. #
Remo vethe hooks 3from the tie-down
ey es 4 onthe left and right. #
Remo vethe guide rod1 from the holders
2. #
Tosto w:press there d buttons on thetop
and bottom guide rods. #
Fold up and retract the partition net. Overview of
the tie-down eyes Obser
vethe no tes on loading theve hicle
(/ page 98). 1
Tie-down eyes for securing loads Overview of bag hooks
&
WARNING Risk of inju rywhen using bag
hooks with heavy objects
The bag hooks cannot restra in heavy objects
or items of luggage. Seats and
stowing 107

Objects or items of luggage could be
thrown
around and thereby hit vehicle occupants
when braking or abruptly changing direc‐
tions. #
Onlyhang light objects on the bag
hooks. #
Never hang hard, sharp-edged or fragile
objects on the bag hooks. Obser
vethe no tes on loading theve hicle
(/ page 98).
The bag hooks can bear a maximum load of
3 kg . Do not use them tosecure a load. 1
Bag hook At
taching a roof rack &
WARNING Risk of inju ryifth e maximum
ro of load is exceeded
When you load thero of, the cent reof gr avity
of theve hicle rises and the usual driving ch
aracteristics as well as thesteering and
braking characteristics change. During cor‐
nering, theve hicle tilts more strongly and
may react more sluggishly tosteering mo ve‐
ments.
If yo uexc eed the maximum roof load, the
driving characteristics, as well as thesteer‐
ing and braking characteristics, will be
great lyimpaired. #
Alw ays comply with the maximum roof
load and adjust your driving style. &
WARNING Risk of inju ryif unsuitable
climbing aids are used
If yo u use vehicle body openings or add-on
parts as steps, thefo llowing can occur:
R You may slip and/or fall.
R You may damage theve hicle and then
fa ll. #
Alw ays use ‑non-slip, stable climbing
aids, e.g. a suitable ladder. 108
Seats and stowing

#
Remo vethero of rack before ins talling
th e co vers. Bear in mind
thefo llowing related topic:
R Vehicle tool kit overview(/ page418)
An inco rrectly attached roof rack or an incor rect
ro of load can become de tach ed from theve hicle.
It is essential tocomply wi th thero of rack manu‐
fa cturer's ins tallation instructions. #
Carefully remo vethe co vers 1 inthe direc‐
tion of the ar row with the disassembly tool. #
Attach thero of rack atthe securing points
2. #
Comply with thero of rack manufacturer's
ins tallation instructions. #
Secure the load on thero of rack. Cup holders
Fi
tting the cup holder in or removing it from
the centre console &
WARNING ‑ Risk of accident or inju ry
when using the cup holder while the
ve hicle is in motion
The cup holder cannot hold a container
secure while theve hicle is in motion.
If yo u use a cup holder while theve hicle is in
motion, the conta iner may be flung around
and liquids could be spilled. The vehicle
occupants may come into contact with the
liquid and if it is hot, they could be scalded.
Yo u could be distracted from traf fic condi‐
tions and you may lose cont rol of theve hicle. #
Only use the cup holder when theve hi‐
cle is stationar y. #
Only use the cup holder for containers
of theright size. #
Alw ays close the conta iner, particularly
if th e liquid is hot. #
Toremo ve: slide the catch 2forw ards and
pull out the cup holder 1. #
Tofit: inse rtthe cup holder 1and slide
back the catch 2.
% The cup holder rubber mat can be remo ved
fo r cleaning, e.g. using clean, luk ewarm
wate r.
% Obser vethe no tes on loading theve hicle
(/ page 98). 11 0
Seats and stowing