2018 MERCEDES-BENZ G-CLASS SUV ECU

Re
moving the fire extinguisher &
WARNING Risk of accident due toan
incor rectly secu redfire extinguisher in
th e driver's foot we ll
A fire extinguisher in the driver's foot we ll
may impede pedal tra vel or block a
depressed pedal.
This jeopardises the operating and road
saf ety of theve hicle.
Moreo ver,th efire extinguisher can be flung
around in the driver's foot we ll and injure the
driver or other vehicle occupants. #
Alw aysst ore and secure thefire extin‐
guisher in the brac ket du ring the jour‐
ne y. #
Do not remo vethefire extinguisher
while driving. #
Left-hand drive vehicle: pulltab1
upwards. #
Remo vefire extinguisher 2. Flat tyre
Note
s onflat tyres &
WARNING Risk of an accident when
driving wi thaflat tyre
A flat tyre great lyimpairs driving characteris‐
tics, as well as steering and braking. #
Do not drive with a flat tyre. #
Remo vetheflat tyre and fit th e spare
wheel or consult a qualified specialist
wo rkshop. In
theeve nt of a flat tyre, thefo llowing options
are available depending on your vehicle's equip‐
ment:
R Vehicles with Mercedes me connect: you
can make a call for breakdown assi stance via
th eove rhead control panel in the case of a
breakdown (/ page319).
R Allvehicles: change the wheel
(/ page 419).
% The emer gency spa rewheel is only available
in cer tain countries. Breakdown assis
tance 393

Spare wheel brac
ket on the rear-end door St
ainless-s teel spa rewheel brac ket Re
moving a stainless-s teel spa rewheel
brac ket #
Remo vescr ewdriver 1from theve hicle tool
kit (/ page418). #
Open the lock on co verring 3 with scr ew‐
driver 1. #
Foldtab2 down. #
Pull co verring 3 apart and remo veit. #
Remo vecover panel 4. Re
moving the spare wheel #
Remo vewheel nuts 5. #
Remo vethe spare wheel. Securing
the wheel tothe spa rewheel
brac ket #
Use nuts 5tosecure thefa ulty wheel tothe
spare wheel brac ket.Speci fied tigh tening
to rq ue: 20 Nm #
Position co ver panel 4again. Make sure
th at retai ner 6ofthe co ver panel engages
in recess 7. #
Attach coverring 3 again and close the
loc k.
% Make sure that the lock does not co verthe
re ve rsing camera. If necessar y,turn co ver
ri ng 3 slightly. 394
Breakdown assi stance

Ve
hicles with an emer gency spare wheel:
obser vethe no tes on the emer gency spa re
wheel.
Spa rewheel brac ket with pr otective ty re
co ver Re
moving the pr otective ty recover #
Pull pr otective tyre co ver1 onthere ar side
apart and remo veit Re
moving the wheel from the spare wheel
brac ket and securing a faulty wheel #
Remo vewheel nuts 2. #
Remo vethe spare wheel. #
Use nuts 2tosecure thefa ulty wheel tothe
spare wheel brac ket.Speci fied tigh tening
to rq ue: 20 Nm Ve
hicles with an emer gency spare wheel:
re moving the half shell #
Remo vehalf shell 3. #
Remo vewheel nuts 2. #
Remo vethe emer gency spa rewheel. #
Remo vethere ar half shell. #
Use nuts 2tosecure thefa ulty wheel tothe
spare wheel brac ket.Speci fied tigh tening
to rq ue: 20 Nm #
Stow th e half shells in the luggage compart‐
ment. Breakdown assis
tance 395

#
Avoid numerous and extended attem pts
to start the engine. Obser
vethefo llowing points during starting
assis tance and when charging the battery:
R Only use undamaged jump lead/charging
cables with a suf ficient cross-section and
insula tedte rm inal clamps.
R Non- insulated parts of thete rm inal clamps
must not come into con tact wi thother me tal
parts while the jump lead/charging cable is
connected tothe battery/jump-s tart connec‐
tion point.
R The jump lead/charging cable must not
come into contact wi thany parts which may
mo vewhen the engine is running.
R Alw ays make sure that nei ther you nor the
battery is elect rostatically charge d.
R Keep away from fire and naked flames.
R Do not lean overth e batter y. Obser
vethe additional following points when
ch arging the battery:
R Only use battery charge rs tested and
appr oved for Mercedes-Benz.
R Read the battery charge r's operating instruc‐
tions before charging the batter y.
Obser vethe additional following points during
st arting assis tance:
R Starting assis tance may be pe rformed using
only batteries with a nominal voltage of 12V.
R The vehicles must not touch.
R Petrol engine: only acceptstarting assis‐
ta nce if the engine and exhaust sy stem are
cold. St
arting assi stance and charging the12 V
battery Requ
irements:
R The vehicle is secured with the electric park‐
ing brake.
R The transmission is in position j.R
The ignition and all electrical consumers are
switched off.
R The bonn etis open. #
Slide co ver1 of positive clamp 2onthe
jump-s tarting connection point in the direc‐
tion of the ar row. #
Connect positive clamp 2onyour vehicle to
th e positive pole of the donor battery using Breakdown assis
tance 399

When
your vehicle is then towe daw ay, signif‐
icantly more ef fort may be requ ired tosteer
and brake than is no rmally requ ired. #
Use a tow bar. #
Make sure that thesteering wheel can
mo vefreely, before towing theve hicle
aw ay. *
NO
TEDama gedue toexcessive tracti ve
po wer If
yo u pull away sharpl y,the tractive po wer
may be too high and theve hicles could be
damaged. #
Pull away slowly and smoo thly. Note
s onreco vering a vehicle that is stuck *
NO
TEDama geas a result of reco vering a
ve hicle that is stuck If
th e tractive po wer is too high, theve hicles
could be damaged. #
Pull theve hicle that is stuck out as
st ra ight and evenly as possible du ring
re co very. Obser
vethefo llowing during reco very to avo id
damage to yourvehicle:
R ifth e driven wheels get trapped on loose or
muddy ground, reco verth eve hicle with the
utmost care,
especially so if theve hicle is laden.
R never attem pttoreco ver a vehicle that is
st uck with a trailer attached.
R pull out theve hicle that is stuck backwards,
if possible, using the trac ksit made before it
became stuc k. To
wing vehicle away intheeve nt of malfunc‐
tions Note
s ontowing away intheeve nt of mal‐
functions
* NO
TEDama gedue toincor rect attach‐
ment and use of old nuts The
vehicle and components of theve hicle
can be damaged due toincor rect attachment
and use of old nuts. #
Ifyo ure mo vethe propeller shaft, place
th e M10 nuts on the M8 bolts as
spacers and secure them with M8 nuts. #
Alw ays use new self-locking nuts when
ins talling the propeller shafts. Obser
vethe no tes on towing away
( / page 401).
% For fur ther information, consult a Mercedes-
Benz Service Centre. Breakdown assis
tance 403

To
wing away intheev ent of malfunctions
To wing away intheev ent of dama getothe
engine, transmission or electrics #
Shift the transmission toposition i.
To wing away intheev ent of transfer case
dama ge #
Remo vethe propeller shafts between the
axles and the transfer case.
To wing away intheev ent of front axle dam‐
age #
Remo vethe propeller shaft between there ar
axle and the transfer case. #
Tow aw ay theve hicle with a raised front axle.
To wing away intheev ent of rear axle dam‐
age #
Remo vethe propeller shaft between the front
axle and the transfer case. #
Tow aw ay theve hicle with a raised rear axle
and with wheel rollers under the front axle. Loading
theve hicle for transport #
Obser vethe no tes on towing away
( / page 401). #
Connect theto w bar totheto wing eye in
order toload theve hicle. #
Shift the transmission toposition i.
% The automatic transmission may be loc ked
in position jintheeve nt of dama getothe
electrics. Toshift toi , pr ovide the on-
board electrical sy stem with po wer
( / page 399). #
Load theve hicle onto the transpor ter. #
Shift the transmission toposition j. #
Use the electric parking brake tosecure the
ve hicle against rolling away. #
Only secure theve hicle bythe wheels. #
Make sure that the front and rear axles come
to rest on the same transpor tation vehicle.
* NO
TEDama getothe driv etra in due to
incor rect positioning #
Do not position theve hicle abo vethe
connection point of the transport vehi‐
cle. 404
Breakdown assis tance

*
NO
TEDama geor malfunctions caused
by moisture Moisture may cause dama
getothe electrical
sy stem or cause it tomalfunction. #
When the fuse box is open, make sure
th at no moisture can enter the fuse
box. #
When closing the fuse box, make sure
th at the seal of the lid is positioned cor‐
re ctly on the fuse box. If
th e newly inser ted fuse also blo ws, ha vethe
cause traced and rectified at a qualified special‐
ist workshop.
Ensure thefo llowing before replacing a fuse:
R The vehicle is secured against rolling away
R All electrical consumers are switched off
R The ignition is switched off
The electrical fuses are located in various fuse
bo xes:
R Fuse box in the engine compartment on the
left side (/ page 406) R
Fuse box on theright side of the cockpit
(/ page 407)
R Fuse box in there ar passenger compartment
(/ page 407) Opening and closing
the fuse box in the
engine compa rtment Re
quirements:
R A dry clo thand a sc rewdriver are available.
Obse rveth e no tes on electrical fuses
(/ page 405).
Opening &
WARNING Risk of inju ryfrom using the
windscreen wipers while the engine bon‐
net is open
When the engine bonn etis open, and the
windscreen wipers are set in motion, you can
be trapped bythe wiper linkage. #
Alw ays switch off the windscreen wip‐
ers and ignition before opening the
engine bonn et. #
Open the bonn et. #
Remo veany existing moisture from the fuse
box using a dry clo th. #
Loosen scr ews1. #
Fold out co ver2 inthe direction of the
ar row and remo veit. 406
Breakdown assis tance

Ra
dio equipment appr oval of the ty repres‐
sure moni toring sy stem
Ra dio equipment appr oval numbers Countr
yRadio equipment appr oval
number
Ar ge ntina Schrader AG5SP4
Numero de Registro CNC:
H-1 4795
Brazil MODELO:
AG5SP4-D
AN ATEL: 0280-15-8001
Es te equipamento opera em
caráter secundário, is toé, não
te m direito à pr oteção contrain‐
te rferência prejudicial, mesmo de
es tações do mesmo tipo e não
pode causar inter ferê ncia a si ste‐
mas operando em caráter pri‐
mário. Countr
yRadio equipment appr oval
number
European
Union Hereb
y,Schrader Electronics Ltd
declares that thera dio equip‐
ment type "AG5SP4 & MFR" is in
compliance with Directive
20 14 /53/EU.
The full text of the EU declaration
of confo rmity is available at the
fo llowing internet address:
http://www.tpmseuro‐
shop.com/documents/declara‐
tion_conformities
GG4: f = 433.92MHz; Maximum
ef fective radiated P < 10mw
(e.r.p)
MFR recei ver:Category II
Schrader Elect ronics Ltd. 11
Te ch nology Park, Count
ryRadio equipment appr oval
number
Belfast Road, Antrim BT41 1QS,
Nor thern Ireland United Kingdom
Indonesia 38892/SDPPI/20 15
Jordan Kingdom of Jordan Type appr oval
fo rTy re Pressure sensor.
Manufacturer: Schrader Elect ron‐
ics Ltd.
Model: AG5SP4
Ty pe Appr oval Numb er:
TRC/LPD/20 15/21
MFR
Ty pe Appr oval Numb er:
TRC/LPD/20 15/223 Wheels and tyres
413