2018 LEXUS LS500H Owners Manual

4898-2. Customization
LS500h_OM_OM50F42U_(U) 8
Vehicle specifications ■
PCS (Pre-Collision System) and FC TA (Front Cross Traffic Alert) *
( → P.209,
220, 227) *
:If equipped ■
LTA (Lane Tracing Assist) *
( → P.230)
*
:If equipped
■
LKA (Lane-Keeping Assist) *
( → P.240)Function Default setting Customized set-
ting
PCS (Pre-Collision System)
and FCTA function On Off — O — —
Adjust alert timing Middle Far
— O — —
Near
Pedestrian alert *
and FCTA
function On Off — O — —
Function Default setting Customized set-
ting
Lane centering function On Off — O — —
Steering assist function On Off — O — —
Alert type Steering wheel
vibration Buzzer — O — —
Alert sensitivity High Standard — O — —
Vehicle sway warning func-
tion On Off — O — —
Vehicle sway warning sensi-
tivity Standard High
— O — —
Low
Function Default setting Customized set-
ting
Lane centering function Off On — O — —
Steering assist function On Off — O — —
Alert type Steering wheel
vibration Buzzer — O — —
Alert sensitivity Standard High — O — — A B C D
A B C D
A B C D

490 8-2. Customization
LS500h_OM_OM50F42U_(U) *
:If equipped ■
RSA (Road Sign Assist) *
( → P.247)
*
:If equipped ■
BSM (Blind Spot Monitor) ( → P.260)Vehicle sway warning func-
tion On Off — O — —
Vehicle sway warning sensi-
tivity Standard High
— O — —
Low
Function Default setting Customized set-
ting
RSA (Road Sign Assist) On Off — O — —
Excess speed notification
method Display only No notification
— O — —
Display and
buzzer
Excess speed notification
level 1 mph (2 km/h) 3 mph (5 km/h)
— O — —
5 mph (10 km/h)
Other notifications method
(No-entry notification) Display only No notification
— O — —
Display and
buzzer
Function Default setting Customized set-
ting
BSM (Blind Spot Monitor) On Off — O — —
Outside rear view mirror indi-
cator brightness Bright Dim — O — —
Alert timing for presence of
approaching vehicle (sensitiv-
ity) Intermediate Early
— O — —Late
Only when vehi-
cle detected in
blind spotFunction Default setting Customized set-
ting A B C D
A B C D
A B C D

4918-2. Customization
LS500h_OM_OM50F42U_(U) 8
Vehicle specifications ■
PKSA (Parking Support Alert) ( → P.265)■
Intuitive parking assist ( → P.266)■
RCTA (Rear cross traffic alert) function ( → P.273)
■
RCD (Rear camera detection) function *
( → P.277)*
:If equipped ■
PKSB (Parking Support Brake) ( → P.280)
■
Driving mode select switch ( → P.298)Function Default setting Customized set-
ting
Buzzer volume Level2 Level1
— O — —
Level3
Function Default setting Customized set-
ting
Intuitive parking assist On Off — O — —
Function Default setting Customized set-
ting
RCTA (Rear cross traffic
alert) function On Off — O — —
Function Default setting Customized set-
ting
RCD (Rear camera detec-
tion) function On Off — O — —
Function Default setting Customized set-
ting
PKSB (Parking Support
Brake) function On Off — O — —
Function Default setting Customized set-
ting
Powertrain control in custom
mode Normal Power
O — — —
Eco A B C D
A B C D
A B C D
A B C D
A B C D
A B C D

492 8-2. Customization
LS500h_OM_OM50F42U_(U) ■
Electronically modulated air suspension *
( → P.299)*
:If equipped ■
Automatic air conditioning system ( → P.323)
■
Seat heater/seat ventilators ( → P.336)Chassis control in custom
mode Normal Sport
O — — —
Comfort
Air conditioning operation in
custom mode Normal Eco O — — —
Function Default setting Customized set-
ting
Vehicle height control On Off — O — —
Ingress/egress height control
function On Off — O — —
Vehicle height when parked Normal High — O — —
Function Default setting Customized set-
ting
A/C auto switch operation On Off O — — O
Exhaust gas sensor sensitivity Standard -3 to 3 O — — O
Function Default setting Customized set-
ting
Driver’s seat temperature
preference in automatic
mode Standard -2 (cooler) to 2
(warmer) O — — O
Passenger’s seat tempera-
ture preference in automatic
mode Standard -2 (cooler) to 2
(warmer) O — — O
Left-hand rear seat tempera-
ture preference in automatic
mode *
Standard -2 (cooler) to 2
(warmer) O — — OFunction Default setting Customized set-
ting A B C D
A B C D
A B C D
A B C D

4938-2. Customization
LS500h_OM_OM50F42U_(U) 8
Vehicle specifications *
:If equipped ■
Heated steering wheel *
( → P.336)*
:If equipped ■
Illumination ( → P.340)Right-hand rear seat tem-
perature preference in auto-
matic mode *
Standard -2 (cooler) to 2
(warmer) O — — O
Power switch linked auto-
matic activation of the
left-hand rear seat
heater/ventilator *
Off On O — — O
Power switch linked auto-
matic activation of the
right-hand rear seat
heater/ventilator *
Off On O — — O
Function Default setting Customized set-
ting
Steering wheel heating pref-
erence in automatic mode Standard -2 (low) to 2
(high) O — — O
Function Default setting Customized set-
ting
Time elapsed before the inte-
rior lights turn off 15 seconds Off
O — — O7.5 seconds
30 seconds
Operation after the power
switch is turned off On Off — — — O
Operation when the doors
are unlocked On Off — — — O
Operation when you
approach the vehicle with the
electronic key on your person On Off — — — O
Footwell lights On Off — — — OFunction Default setting Customized set-
ting A B C D
A B C D
A B C D

494 8-2. Customization
LS500h_OM_OM50F42U_(U) ■
Vehicle customization●
When the smart access system with
push-button start is off, the entry unlock
function cannot be customized.●
When the doors remain closed after
unlocking the doors and the timer acti-
vated automatic door lock function acti-
vates, signals will be generated in
accordance with the operation buzzer
volume and operational signal (Emer-
gency flashers) function settings.
●
Some settings can be changed using a
switch or the audio system screen. If a
setting is changed using a switch, the
changed setting will not be reflected on
the audio system screen until the power
switch is turned of f and then to ON
mode.
■
Clock settings screen
If the clock adjustment screen is displayed
continuously when attempting to change
the clock settings, the system may be mal- functioning. Have the vehicle inspected by
your Lexus dealer.Instrument panel ornament
light and door trim ornament
lights On Off — — — O
Time elapsed before the outer
foot lights turn off 15 seconds Off
O — — O7.5 seconds
30 seconds
Operation of the outer foot
lights when you approach the
vehicle with the electronic
key on your person On Off — — — O
Operation of the outer foot
lights when the doors are
unlocked On Off — — — O
Operation of the outer foot
lights when a door is opened On Off — — — O
Fading out of the outer foot
lights when they turn off Long Short — — — OFunction Default setting Customized set-
ting A B C D

4958-3. Initialization
LS500h_OM_OM50F42U_(U) 8
Vehicle specifications 8-3.Initialization
*
:If equippedItems to initialize The following items must be initialized for normal system operation after such
cases as the 12-volt battery being re connected, or maintenance being per-
formed on the vehicle:
List of items to initialize Item When to initialize Reference
PKSB (Parking Support
Brake) • After reconnecting or changing the
12-volt battery P.284
Message indicating
maintenance is
required • After maintenance is performed P.378
Oil maintenance • After maintenance is performed P.390
Tire pressure warning
system • When the tire inflation pressure is
changed, such as when changing trav-
eling speed or load weight.
• When the tire inflation pressure is
changed, such as when the tire size is
changed.
• When rotating the tires.
• After performing the transmitter ID
code registration procedure. P.401
Lexus parking assist
monitor *
• 12-volt battery ha s been reinstalled.
• The steering wheel has been moved
while the 12-volt battery was being
reinstalled.
• 12-volt battery power is low. Refer to the “NAVI-
GATION AND MUL-
TIMEDIA SYSTEM
OWNER’S MAN-
UAL”.
Panoramic view moni-
tor *
• 12-volt battery ha s been reinstalled.
• The steering wheel has been moved
while the 12-volt battery was being
reinstalled.
• 12-volt battery power is low. Refer to the “NAVI-
GATION AND MUL-
TIMEDIA SYSTEM
OWNER’S MAN-
UAL”.

496 8-3. Initialization
LS500h_OM_OM50F42U_(U)