2018 KIA STONIC Start

NOTICE
•When operating the vehicle on a
dynamometer, ensure that the
ESC is turned off (ESC OFF light il‐
luminated).
•Turning the ESC off does not af‐
fect ABS or brake system opera‐
tion.
WARNING
Never press the ESC OFF buttonwhile ESC is operating.If the ESC is turned off while ESC isoperating, the vehicle may go out ofcontrol.To turn ESC off while driving, pressthe ESC OFF button while driving ona flat road surface.
Hill-start assist control (HAC) (if
equipped)
Hill start Assist Control is a comfort
function. The main intend is to prevent the vehicle from rolling backwards
while driving off uphill on an inclined
surface. HAC holds the braking pressure
builtup by driver during stopping proce‐ dure for 2 seconds after releasing
brake pedal.
During the pressure-hold period, the
driver has enough time to press the ac‐ celerator pedal to drive off.
The braking pressure is reduced as
soon as the system detects the driver’s
intention to drive off.
WARNING
The HAC is usually activated only for2 seconds. The driver should becareful from the rolling backwardcausing the accident with behind ob‐jects or human, when the driver mayfeel the unintended rolling backwardwhile driving off on hill due to insuf‐ficient brake hold pressure built-upby driver during stopping procedure.
NOTICE
•The HAC does not operate when
the transaxle shift lever is in the P
(Park) or N (Neutral) position.
•The HAC activates even though
the ESC is off but it does not acti‐
vate when the ESC has malfunc‐
tioned.
Vehicle stability management
(VSM) (if equipped)
This system provides further enhance‐
ments to vehicle stability and steering responses when a vehicle is driving on a
slippery road or a vehicle detected
changes in coefficient of friction be‐ tween right wheels and left wheels
when braking.
VSM operation
When the VSM is in operation, ESC indi‐
cator light () blinks.
When the vehicle stability management
is operating properly, you can feel a slight pulsation in the vehicle. This is
only the effect of brake control and in‐
dicates nothing unusual.

6-39
6
Driving your vehicle

CRUISE CONTROL SYSTEM (IF EQUIPPED)
The cruise control system allows you to
program the vehicle to maintain a con‐
stant speed without pressing the accel‐ erator pedal.
This system is designed to function
above approximately 30 km/h (20
mph).
WARNING
•If the cruise control is left on,(CRUISE indicator light in the in‐strument cluster illuminated) thecruise control can be switched onaccidentally. Keep the cruise con‐trol system off (CRUISE indicatorlight OFF) when the cruise controlis not in use, to avoid inadvertent‐ly setting a speed.
•Use the cruise control system onlywhen traveling on open highwaysin good weather.
(Continued)
(Continued)
•Do not use the cruise control whenit may not be safe to keep the carat a constant speed, for instance,driving in heavy or varying traffic,or on slippery (rainy, icy or snow-covered) or winding roads or over6% uphill or down-hill roads.
•Pay particular attention to thedriving conditions whenever usingthe cruise control system.
CAUTION
During cruise-speed driving of amanual transaxle vehicle, do notshift into neutral without depressingthe clutch pedal, since the enginewill be over-revved. If this happens,depress the clutch pedal or releasethe cruise control ON-OFF switch.
NOTICE
During normal cruise control opera‐
tion, when the SET switch is activa‐
ted or reactivated after applying the
brakes, the cruise control will ener‐
gize after approximately 3 seconds.
This delay is normal.
NOTICE
To activate cruise control, depress
the brake pedal at least once after
turning the ignition switch to the ON
position or starting the engine. This
is to check if the brake switch which
is important part to cancel cruise
control is in normal condition.

6-43
6
Driving your vehicle

¥
5ZQF
$
1. Press the cruise /CRUISE/ but‐
ton on the steering wheel, to turn
the system on. The cruise indicator
light will illuminate.
2. Accelerate to the desired speed, which must be more than 30 km/h
(20 mph).
NOTICE
nManual transaxle
For manual transaxle vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
¥
5ZQF
"
¥
5ZQF
#3. Move the lever down (to SET-), and release it at the desired speed. The
cruise set indicator light will illumi‐
nate. Release the accelerator pedal
at the same time. The desired
speed will automatically be main‐
tained.
On a steep grade, the vehicle may slow
down or speed up slightly while going downhill.

6-45
6
Driving your vehicle

DRIVER ATTENTION WARNING (DAW) SYSTEM (IF EQUIPPED)
The Driver Attention Warning (DAW)
system displays the condition of the
driver's fatigue level and inattentive driving practices.
System setting and activation
System setting
• The Driver Attention Warning system is set to be in the OFF position, when
your vehicle is first delivered to you from the factory.
• To turn ON the Driver Attention Warning system, turn on the engine,
and then select 'User Settings
Driving Assist Driver Attention
Warning Normal/Early' on the LCD
display.
• The driver can select the Driver At‐ tention Warning system mode.- Off: The Driver Attention Warning system is deactivated.
- Normal: The Driver Attention Warning system alerts the driver
of his/her fatigue level or inatten‐
tive driving practices.
- Early: The Driver Attention Warn‐ ing system alerts the driver of
his/her fatigue level or inattentive
driving practices faster than Nor‐mal mode. • The set-up of the Driver Attention
Warning system will be maintained,as selected, when the engine is re‐
started.
Display of the driver's attention
level
0:#-
4ZTUFN
PGG
0:#-
"UUFOUJWF
ESJWJOH
0:#-
*OBUUFOUJWF
ESJWJOH
• The driver can monitor their driving conditions on the LCD display.
The DAW screen will appear when
you select the ASSIST mode tab (
)
on the LCD display if the system is
activated. (For more information, re‐
fer to L

• When the driver turns on the systemwhile driving, it displays 'Last Break
time' and level.
Take a break
0:#-
• The "Consider taking a break" mes‐ sage appears on the LCD display and
a warning sounds in order to suggest the driver to take a break, when the
driver's attention level is below 1.
• The Driver Attention Warning system does not suggest the driver to take a
break, when the total driving time is
shorter than 10 minutes.
Resetting the system
• The last break time is set to 00:00 and the driver's attention level is setto 5 (very attentive) when the driver
resets the Driver Attention Warning
system.
• The Driver Attention Warning system resets the last break time to 00:00
and the driver's attention level to 5 in the following situations. - The engine is turned OFF.
- The driver unfastens the seat belt and then opens the driver's door.
- The engine has been idled continu‐ ously over 10 minutes.
• The Driver Attention Warning system operates again, when the driver re‐
starts driving.
System standby
0:#-
The Driver Attention Warning system
enters the ready status and displays the 'Standby' screen in the following
situations.
- The camera does not detect the
lanes.
- Driving speed remains under 60 km/h
(40 mph) or over 200 km/h
(125 mph).

6-67
6
Driving your vehicle

(Continued)
•The system might be turned offdue to strong electromagneticwaves.
Non-operating condition
Outside rearview mirror may not alert
the driver when:
- The outside rearview mirror housing
is damaged or covered with debris.
- The window is covered with debris.
- The windows are severely tinted.
Driver's attention
The driver must be cautious in the be‐
low situations, because the system may not detect other vehicles or ob‐
jects in certain circumstances.
- The vehicle drives on a curved road or
through a tollgate.
- The sensor is polluted with rain,
snow, mud, etc.
- The rear bumper, in which the sensor
is located, is covered or blocked with
a foreign matter such as a sticker, a bumper guard, a bicycle stand, etc. -
The rear bumper is damaged, or the
sensor is out of the original default
position.
- The vehicle height gets lower or high‐
er due to heavy loading in a tailgate,
abnormal tire pressure, etc.
- The vehicle drives in a bad weather
such as heavy rain or snow.
- There is a fixed object near the vehi‐
cle, such as a guardrail.
- A big vehicle is near such as a bus or
truck.
- A motorcycle or bicycle is near.
- A flat trailer is near.
- If the vehicle has started at the same
time as the vehicle next to you and has accelerated.
- When the other vehicle passes at a
very fast speed.
- While changing lanes.
- When going down or up a steep, un‐
even road.
- When the other vehicle approaches
very close.
- When a trailer or carrier is installed.
- When the temperature of the rear
bumper is very high or low. -
When the sensors are blocked by
other vehicles, walls or parking-lot
pillars.
- When the detected vehicle also
moves back, as your vehicle drives back.
- If there are small things like shopping
cart and baby carriage.
- If there is low height vehicle like sport
vehicle.
- When other vehicles are close to your
vehicle.
- When the vehicle in the next lane
moves two lanes away from you OR when the vehicle two lanes away
moves to the next lane from you.
- When driving through a narrow road
with many plants.
- When driving on wet surface.


6-75
6
Driving your vehicle

ECONOMICAL OPERATION
Your vehicle's fuel economy depends mainly on your style of driving, where
you drive and when you drive.
Each of these factors affects how
many kilometers (miles) you can get from a liter (gallon) of fuel. To operate
your vehicle as economically as possi‐
ble, use the following driving sugges‐ tions to help save money in both fuel
and repairs: • Drive smoothly. Accelerate at a mod‐ erate rate. Don't make "jackrabbit"
starts or full-throttle shifts and maintain a steady cruising speed.
Don't race between stoplights. Try to
adjust your speed to the traffic so
you don't have to change speeds un‐
necessarily. Avoid heavy traffic whenever possible.
Always maintain a safe distance from
other vehicles so you can avoid un‐
necessary braking. This also reduces
brake wear.
• Drive at a moderate speed. The fast‐ er you drive, the more fuel your vehi‐cle uses. Driving at a moderate
speed, especially on the highway, is
one of the most effective ways to re‐
duce fuel consumption. • Don't "ride" the brake pedal. This can
increase fuel consumption and also
increase wear on these components.
In addition, driving with your foot
resting on the brake pedal may cause
the brakes to overheat, which re‐ duces their effectiveness and may
lead to more serious consequences.
• Take care of your tires. Keep them inflated to the recommended pres‐
sure. Incorrect inflation, either too
much or too little, results in unneces‐ sary tire wear. Check the tire pres‐
sures at least once a month.
• Be sure that the wheels are aligned correctly. Improper alignment can re‐
sult from hitting curbs or driving too fast over irregular surfaces. Poor
alignment causes faster tire wear
and may also result in other prob‐
lems as well as greater fuel con‐
sumption.
• Keep your car in good condition. For better fuel economy and reduced
maintenance costs, maintain your car
in accordance with the maintenance
schedule in L

Instructions about safety chains may
be provided by the hitch manufacturer or by the trailer manufacturer. Follow
the manufacturer’s recommendation
for attaching safety chains. Always leave just enough slack so you can turn
with your trailer. And, never allow safe‐
ty chains drag on the ground.
Trailer brakes
If your trailer is equipped with a braking
system, make sure it conforms to your
country’s regulations and that it is properly installed and operating cor‐
rectly.
If your trailer weighs more than the
maximum trailer weight without trailer brakes loaded, then it needs its own
brakes and they must be adequate. Be
sure to read and follow the instructions for the trailer brakes so you’ll be able
to install, adjust and maintain them
properly. • Don’t tap into your vehicle's brake system.
WARNING
nTrailer brakes
(Continued)
(Continued)
Do not use a trailer with its ownbrakes unless you are absolutelycertain that you have properly setup the brake system. This is not atask for amateurs. Use an experi‐enced, competent trailer shop forthis work.
Driving with a trailer
Towing a trailer requires a certain
amount of experience. Before setting out for the open road, you must get to
know your trailer. Acquaint yourself
with the feel of handling and braking with the added weight of the trailer.
And always keep in mind that the vehi‐
cle you are driving is now a good deal longer and not nearly so responsive as
your vehicle is by itself.
Before you start, check the trailer hitch
and platform, safety chains, electrical connector(s), lights, tires and mirror
adjustment. If the trailer has electric
brakes, start your vehicle and trailer moving and then apply the trailer brake
controller by hand to be sure the
brakes are working. This lets you check your electrical connection at the same
time. During your trip, check occasionally to
be sure that the load is secure, and that the lights and trailer brakes are
still working.
Following distance
Stay at least twice as far behind the
vehicle ahead as you would when driv‐ ing your vehicle without a trailer. This
can help you avoid situations that re‐
quire heavy braking and sudden turns.
Passing
You’ll need more passing distance up
ahead when you’re towing a trailer. And, because of the increased vehicle
length, you’ll need to go much farther
beyond the passed vehicle before you can return to your lane.
Backing up
Hold the bottom of the steering wheel
with one hand. Then, to move the trail‐ er to the left, just move your hand to
the left. To move the trailer to the
right, move your hand to the right. Al‐ ways back up slowly and, if possible,
have someone guide you.
Driving your vehicle
6-88