2018 KIA STONIC radio

(Continued)
•Other vehicles or objects may be
blocking the signal.
•The weather is extremely cold.
•The transmitter is close to a radio
transmitter such as a radio station
or an airport which can interfere
with normal operation of the
transmitter.
When the transmitter does not work
correctly, open and close the door
with the ignition key. If you have a
problem with the transmitter, Kia
recommends to contact an author‐
ized Kia dealer/service partner.
(Continued)
(Continued)
•If the transmitter is in close prox‐
imity to your cell phone or smart
phone, the signal from the trans‐
mitter could be blocked by normal
operation of your cell phone or
smart phone. This is especially im‐
portant when the phone is active
such as making call, receiving calls,
text messaging, and/or sending/
receiving emails.
Avoid placing the transmitter and
your cell phone or smart phone in
the same pants or jacket pocket
and maintain adequate distance
between the two devices.
CAUTION
•Keep the transmitter away fromwater or any liquid. If the keylessentry system is inoperative due toexposure to water or liquids, it willnot be covered by your manufac‐turer vehicle warranty.
(Continued)
(Continued)
•Keep the transmitter away fromelectromagnetic materials thatblocks electromagnetic waves tothe key surface.
CAUTION
Changes or modifications not ex‐pressly approved by the party re‐sponsible for compliance could voidthe user’s authority to operate theequipment. If the keyless entry sys‐tem is inoperative due to changes ormodifications not expressly ap‐proved by the party responsible forcompliance, it will not be covered byyour manufacturer’s vehicle warran‐ty.
Features of your vehicle
4-08

AUX, USB port (if equipped)
You can use the AUX port to connect
audio devices and the USB port to plug
in a USB device or iPod ®
.
NOTICE
When using a portable audio device
connected to the power outlet, noise
may occur during playback. If this
happens, use the power source of
the portable audio device.
❈ iPod ®
is a trademark of Apple Inc.
How vehicle audio works
'.
SFDFQUJPO*0/041)&3&
AM and FM radio signals are broadcast
from transmitter towers located around your city. They are intercepted
by the radio antenna on your vehicle.
This signal is then received by the radio and sent to your vehicle speakers.
When a strong radio signal has reached
your vehicle, the precise engineering of
your audio system ensures the best possible quality reproduction. However,
in some cases the signal coming to your
vehicle may not be strong and clear.
This can be due to factors, such as the
distance from the radio station, close‐ ness of other strong radio stations or
the presence of buildings, bridges or
other large obstructions in the area.
".
SFDFQUJPO
*0/041)&3&
AM broadcasts can be received at
greater distances than FM broadcasts. This is because AM radio waves are
transmitted at low frequencies. These
long, low frequency radio waves can follow the curvature of the earth rath‐
er than travelling straight out into the
atmosphere. In addition, they curve around obstructions so that they can
provide better signal coverage.

5-03
5
Audio system

.PVOUBJOT#VJMEJOHT 6OPCTUSVDUFE

BSFB
*SPO
CSJEHFT
'.
SBEJP
TUBUJPO
FM broadcasts are transmitted at high
frequencies and do not bend to follow the earth's surface. Because of this, FM
broadcasts generally begin to fade at
short distances from the station. Also, FM signals are easily affected by build‐
ings, mountains, or other obstructions.
These can result in certain listening conditions which might lead you to be‐
lieve a problem exists with your radio.
The following conditions are normal and do not indicate radio trouble:• Fading - As your vehicle moves away from the radio station, the signal will
weaken and sound will begin to fade. When this occurs, we suggest that
you select another stronger station.
• Flutter/Static - Weak FM signals or large obstructions between the
transmitter and your radio can dis‐
turb the signal causing static or flut‐ tering noises to occur. Reducing the
treble level may lessen this effect un‐ til the disturbance clears.
4UBUJPO
 .I[ 4UBUJPO
.I[
• Station Swapping - As an FM signal
weakens, another more powerful sig‐
nal near the same frequency may be‐ gin to play. This is because your radio
is designed to lock onto the clearest
signal. If this occurs, select another
station with a stronger signal.
• Multi-Path Cancellation - Radio sig‐ nals being received from several di‐
rections can cause distortion or flut‐
tering. This can be caused by a direct
and reflected signal from the same
station, or by signals from two sta‐
tions with close frequencies. If this occurs, select another station until
the condition has passed.
Audio system
5-04

Using a cellular phone or a two-
way radio
When a cellular phone is used inside the
vehicle, noise may be produced from the audio system. This does not mean
that something is wrong with the audio
equipment. In such a case, use the cel‐ lular phone at a place as far as possible
from the audio equipment.
CAUTION
When using a communication sys‐tem such as a cellular phone or a ra‐dio set inside the vehicle, a separateexternal antenna must be fitted.When a cellular phone or a radio setis used with an internal antennaalone, it may interfere with the vehi‐cle's electrical system and adverselyaffect safe operation of the vehicle.
WARNING
Do not use a cellular phone whiledriving. Stop at a safe location to usea cellular phone.

5-05
5
Audio system

(Continued)
Do not try remodeling the vehicle in
any way. It is illegal, and may affect
the vehicle’s performance, durability,
and safety. Warranty is also not
provided for problems caused by re‐
modeling.
Be aware of safety problems caused
by remodeling the vehicle with unau‐
thorized electrical devices (lamp,
black box, electrical equipment, diag‐
nostic device, communication device,
etc.). It might cause malfunction of
the vehicle, wiring damage, battery
discharge, connector damage, or
fire. the vehicle or cause fire.
NOTICE
nWindow tinting precaution
Window tint (especially metallic film)
might cause communication disorder
or poor radio reception, and mal‐
function of the automatic lighting
system due to excessive change of
(Continued)
(Continued)
illumination inside the vehicle. The
solution used might also flow into
electric, electronic devices causing
disorder and failure.
Inner panel fuse replacement
0:#
1. Turn the ignition switch and all oth‐er switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight out. Use the removal tool provided
in the main fuse box in the engine
compartment.
4. Check the removed fuse; replace it if it is blown.
Spare fuses are provided in the in‐
strument panel fuse panel (or in
the engine compartment fuse pan‐
el).
5. Push in a new fuse of the same rating, and make sure it fits tightly
in the clips.
If it fits loosely, consult a professional
workshop. Kia recommends to consult an authorized Kia dealer/service part‐
ner.

8-79
8
Maintenance

DECLARATION OF CONFORMITY
&YBNQMF
$&#
The radio frequency components of the
vehicle comply with requirements and other relevant provisions of Directive
1995/5/EC.
Further information including the man‐
ufacturer's declaration of conformity is available on Kia web site as follows;
http://www.kia-hotline.com

9-23
9
Specifications & Consumer information