(Continued)
•Keep the SRS parts and wiringsaway from water or any liquid. Ifthe SRS components are inopera‐tive due to exposure to water orliquids, it may cause fire or severeinjury.
How does the air bag system
operate
• Air bags are activated (able to inflateif necessary) only when the ignition
switch is turned to the ON or START position.
• Air bags inflate instantly in the event of a serious frontal collision or side
collision (if equipped with a side air
bag or curtain air bag) in order to
help protect the occupants from seri‐ ous physical injury.
NOTICE
nIf equipped with rollover sen‐
sor
(Continued)
(Continued)
Also, the air bags inflate instantly in
the event of a rollover (if equipped
with a side air bag or curtain air bag)
in order to help protect the occu‐
pants from serious physical injury.
• In normal conditions, the airbag is de‐ signed to deploy based on certain an‐
gle and intensity of the collision. These two factors are crucial ele‐
ments for deciding whether to trans‐
mit airbag deployment signal or start
the electrical operation or not.
• The airbag will deploy based on angle and intensity of the collision. It willnot deploy in every crash or collision
situations.
• The front air bags will completely in‐ flate and deflate in an instant.
It is virtually impossible for you to
see the air bags inflate during an ac‐
cident.
It is much more likely that you will simply see the deflated air bags
hanging out of their storage com‐
partments after the collision. • In order to help provide protection in
a severe collision, the air bags mustinflate rapidly. The speed of the air
bag inflation is a consequence of ex‐
tremely short time in which a collision
occurs and the need to inflate the air
bag between the occupant and the vehicle structures before the occu‐
pant impacts those structures.
This speed of inflation reduces the
risk of serious or life-threatening in‐
juries in a severe collision and is thus
a necessary part of the air bag de‐ sign.
However, air bag inflation can also
cause injuries which can include facial
abrasions, bruises and broken bones
because the inflation speed also cau‐ ses the air bags to expand with a
great deal of force.
•
There are even circumstances underwhich contact with the steeringwheel air bag can cause fatal injuries,especially if the occupant is posi‐tioned excessively close to the steer‐ing wheel.
3-39
3
Safety features of your vehicle
WARNING
Always use seat belts and child re‐straints – every trip, every time, ev‐eryone! Air bags inflate with consid‐erable force and in the blink of aneye. Seat belts help keep occupantsin proper position to obtain maxi‐mum benefit from the air bag. Evenwith air bags, improperly belted andunbelted occupants can be severelyinjured when the air bag inflates. Al‐ways follow the precautions aboutseat belts, air bags and occupantsafety contained in this manual.To reduce the chance of serious orfatal injuries and receive the maxi‐mum safety benefit from your re‐straint system:•Never place a child in any child orbooster seat in the front seat.
•ABC – Always Buckle Children inthe back seat. It is the safest placefor children of any age to ride.
•Front and side air bags can injureoccupants improperly positioned inthe front seats.
(Continued)
(Continued)
•Move your seat as far back aspractical from the front air bags,while still maintaining control ofthe vehicle.
•You and your passengers shouldnever sit or lean unnecessarilyclose to the air bags. Improperlypositioned drivers and passengerscan be severely injured by inflatingair bags.
•Never lean against the door orcenter console – always sit in anupright position.
•Do not allow a passenger to ride inthe front seat when the passeng‐er’s front air bag OFF indicator isilluminated, because the air bagwill not deploy in the event of amoderate or severe frontal crash.
(Continued)
(Continued)
•No objects should be placed overor near the air bag modules on thesteering wheel, instrument paneland the front passenger's panelabove the glove box, because anysuch object could cause harm ifthe vehicle is in a crash severeenough to cause the air bags todeploy.
•Do not tamper with or disconnectSRS wiring or other components ofthe SRS system. Doing so could re‐sult in injury, due to accidental de‐ployment of the air bags or byrendering the SRS inoperative.
•If the SRS air bag warning light re‐mains illuminated while the vehicleis being driven, have the systeminspected by a professional work‐shop. Kia recommends to visit anauthorized Kia dealer/service part‐ner.
(Continued)
3-47
3
Safety features of your vehicle
SRS care
The SRS is virtually maintenance-free
and so there are no parts you can safe‐
ly service by yourself. If the SRS air bag warning light does not illuminate, or
continuously remains on, have the sys‐
tem inspected by a professional work‐ shop.
Kia recommends to visit an authorized
Kia dealer/service partner.
WARNING
•Modification to SRS components orwiring, including the addition ofany kind of badges to the pad cov‐ers or modifications to the bodystructure, can adversely affectSRS performance and lead to pos‐sible injury.
•For cleaning the air bag pad cov‐ers, use only a soft, dry cloth orone which has been moistenedwith plain water. Solvents or clean‐ers could adversely affect the airbag covers and proper deploymentof the system.
(Continued)
(Continued)
•No objects should be placed overor near the air bag modules on thesteering wheel, instrument panel,and the front passenger's panelabove the glove box, because anysuch object could cause harm ifthe vehicle is in a crash severeenough to cause the air bags to in‐flate.
•If the air bags inflate, have thesystem replaced by a professionalworkshop.Kia recommends to visit an au‐thorized Kia dealer/service part‐ner.
•Do not tamper with or disconnectSRS wiring, or other componentsof the SRS system. Doing so couldresult in injury, due to accidentalinflation of the air bags or by ren‐dering the SRS inoperative.
(Continued)
(Continued)
•If components of the air bag sys‐tem must be discarded, or if thevehicle must be scrapped, certainsafety precautions must be ob‐served. An authorized Kia dealerknows these precautions and cangive you the necessary informa‐tion. Failure to follow these pre‐cautions and procedures could in‐crease the risk of personal injury.
•If your car was flooded and hassoaked carpeting or water onflooring, you shouldn't try to startthe engine; in this case, have yourvehicle inspected by a professionalworkshop. Kia recommends tocontact an authorized Kia dealer/service partner.
Additional safety precautions
•Never let passengers ride in the cargoarea or on top of a folded-down backseat. All occupants should sit upright,
fully back in their seats with their
seat belts on and their feet on the
floor.
Safety features of your vehicle
3-60
(Continued)
key) is dangerous even if the key isnot in the ignition switch or startbutton is ACC or ON position.Children copy adults and they couldplace the key in the ignition switchor press the start button. The igni‐tion key (smart key) would enablechildren to operate power windowsor other controls, or even make thevehicle move, which could result inserious bodily injury or even death.Never leave the keys in your vehiclewith unsupervised children, whenthe engine is running.
WARNING
Kia recommends to use parts for re‐placement from an authorized Kiadealer/service partner. If an after‐market key is used, the ignitionswitch may not return to ON afterSTART. If this happens, the starterwill continue to operate causingdamage to the starter motor andpossible fire due to excessive currentin the wiring.
Immobilizer system
Your vehicle may be equipped with an
electronic engine immobilizer system to
reduce the risk of unauthorized vehicle
use.
Your immobilizer system is comprised of a small transponder in the ignition
key and electronic devices inside the
vehicle.
Vehicles without smart key system
With the immobilizer system, whenever
you insert your ignition key into the ig‐ nition switch and turn it to ON, it checks
and determines and verifies if the igni‐
tion key is valid or not.If the key is valid, the engine will start.
If the key is invalid, the engine will not
start.
To deactivate the immobilizer system:
Insert the ignition key into the key cyl‐ inder and turn it to the ON position.
To activate the immobilizer system:
Turn the ignition key to the OFF posi‐
tion. The immobilizer system activates
automatically. Without a valid ignition key for your vehicle, the engine will not
start.
Vehicles with smart key system
Whenever the engine start/stop button
is changed to the ON position, the im‐
mobilizer system checks and verifies if the key is valid or not. If the key is valid, the engine will start.
If the key is invalid, the engine will not
start.
To deactivate the immobilizer system
Change the engine start/stop button to
the ON position.
To activate the immobilizer system
Change the engine start/stop button to the OFF position. The immobilizer sys‐
tem activates automatically. Without a
valid smart key for your vehicle, the engine will not start.
WARNING
In order to prevent theft of your ve‐hicle, do not leave spare keys any‐where in your vehicle. Your immobil‐izer password is a customer uniquepassword and should be kept confi‐dential. Do not leave this numberanywhere in your vehicle.
4-05
4
Features of your vehicle
CAUTION
•Use the power outlet only whenthe engine is running and removethe accessory plug after use. Usingthe accessory plug for prolongedperiods of time with the engine offcould cause the battery to dis‐charge.
•Only use 12V electric accessorieswhich are less than 10A in electriccapacity.
•Adjust the air-conditioner or heat‐er to the lowest operating levelwhen using the power outlet.
•Close the cover when not in use.
•Some electronic devices can causeelectronic interference when plug‐ged into a vehicle’s power outlet.These devices may cause exces‐sive audio static and malfunctionsin other electronic systems or de‐vices used in your vehicle.
•Using electrical products which ex‐ceed the limited capacity mightcause heating to the power outletand wiring that could lead to anelectrical breakdown.
(Continued)
(Continued)
•Always make sure the electricalpart is firmly plugged into thepower outlet. Incomplete pluggingmay cause electrical breakdown.
•Electrical products with a built-inbattery might cause current flow,which could lead to malfunction ofthe electric/ electronic device inyour vehicle. Only use electricalproducts which include reversecurrent prevention.
WARNING
Do not put a finger or a foreign ele‐ment (pin, etc.) into a power outletand do not touch with a wet hand.You may get an electric shock.
USB charger (if equipped)
The USB charger is designed to re‐
charge batteries of small size electrical devices using a USB cable. The electrical
devices can be recharged when the En‐
gine Start/Stop button is in ACC/ON/ START position.
The battery charging state may be
monitored on the electrical device.
Disconnect the USB cable from the USB
port after use. • Some devices are not supported for fast charging but will be charged withnormal speed.
• Use the USB charger when the engine is running to prevent battery dis‐
charge.
Features of your vehicle
4-130
Making turns
When you’re turning with a trailer,
make wider turns than normal. Do this so your trailer won’t strike soft should‐
ers, curbs, road signs, trees, or other
objects. Avoid jerky or sudden maneu‐ vers. Signal well in advance.
Turn signals when towing a trailer
When you tow a trailer, your vehicle
has to have a different turn signal flasher and extra wiring. The green ar‐
rows on your instrument panel will
flash whenever you signal a turn or lane change. Properly connected, the
trailer lights will also flash to alert oth‐
er drivers you’re about to turn, change lanes, or stop.
When towing a trailer, the green ar‐
rows on your instrument panel will
flash for turns even if the bulbs on the trailer are burned out. Thus, you may
think drivers behind you are seeing
your signals when, in fact, they are not. It’s important to check occasionally to
be sure the trailer bulbs are still work‐
ing. You must also check the lights ev‐ ery time you disconnect and then re‐
connect the wires.
Do not connect a trailer lighting system
directly to your vehicle’s lighting sys‐ tem. Use only an approved trailer wir‐
ing harness. Have yourself assisted by a professio‐
nal workshop in installing the wiring harness.
Kia recommends to visit an authorized
Kia dealer/service partner.
WARNING
Failure to use an approved trailerwiring harness could result in dam‐age to the vehicle electrical systemand/or personal injury.
Driving on grades
Reduce the speed and shift to a lower
gear before you start down a long or steep downgrade. If you don’t shift
down, you might have to use your
brakes so much that they would get hot and no longer operate efficiently.
On a long uphill grade, shift down and
reduce your speed to around 70 km/h
(45 mph) to reduce the possibility of engine and transaxle overheating.
If your trailer weighs more than the
maximum trailer weight without trailer
brakes and you have an automatic transaxle, you should drive in D (Drive)
when towing a trailer. Operating your vehicle in D (Drive)
when towing a trailer will minimize heat build up and extend the life of
your transaxle.
CAUTION
•When towing a trailer on steepgrades (in excess of 6%) pay closeattention to the engine coolanttemperature gauge to ensure theengine does not overheat. If theneedle of the coolant temperaturegauge moves across the dial to‐wards L
(Continued)
•Working under the hood with theengine running is dangerous. It be‐comes even more dangerous whenyou wear jewelry or loose clothing.These can become entangled inmoving parts and result in injury.Therefore, if you must run the en‐gine while working under the hood,make certain that you remove alljewelry (especially rings, bracelets,watches, and necklaces) and allneckties, scarves, and similar looseclothing before getting near theengine or cooling fans.
CAUTION
•Do not put heavy objects or applyexcessive force on top of the en‐gine cover (if equipped) or fuel re‐lated parts.
•When you inspect the fuel system(fuel lines and fuel injection devi‐ces), contact a professional work‐shop. Kia recommends to visit anauthorized Kia dealer/service part‐ner.
(Continued)
(Continued)
•Do not drive long time with the en‐gine cover (if equipped) removed.
•When checking the engine room,do not go near fire.Fuel, washer fluid, etc. are flam‐mable oils that may cause fire.
•Before touching the battery, igni‐tion cables and electrical wiring,you should disconnect the battery"-" terminal. You may get an elec‐tric shock from the electric cur‐rent.
•When you remove the interior trimcover with a flat bed (-) driver, becareful not to damage the cover.
•Be careful when you replace andclean bulbs to avoid burns or elec‐trical shock.
Maintenance
8-08
EXPLANATION OF SCHEDULED MAINTENANCE ITEMS
Engine oil and filter
The engine oil and filter should be
changed at the intervals specified in the maintenance schedule. If the vehi‐
cle is being driven in severe conditions,
more frequent oil and filter changes are required.
Drive belts
Inspect all drive belts for evidence of
cuts, cracks, excessive wear or oil satu‐ ration and replace if necessary. Drive
belts should be checked periodically for
proper tension and adjusted as neces‐
sary.
CAUTION
When you are inspecting the belt,place the ignition switch in theLOCK/OFF or ACC position.
Fuel filter cartridge (for diesel)
A clogged filter can limit the speed at
which the vehicle may be driven, dam‐
age the emission system and cause multiple issues such as hard starting. If
an excessive amount of foreign matter
accumulates in the fuel tank, the filter may require replacement more fre‐
quently.
After installing a new filter, run the en‐
gine for several minutes, and check for leaks at the connections. Have the fuel
filter replaced by a professional work‐
shop. Kia recommends to visit an au‐ thorized Kia dealer/service partner.
Fuel filter (for gasoline)
Kia gasoline vehicle is equipped a life‐
time fuel filter that integrated with the fuel tank. Regular maintenance or re‐
placement is not needed but depends
on fuel quality. If there are some im‐ portant safety matters like fuel flow
restriction, surging, loss of power, hard
starting problem etc, fuel filter inspec‐ tion or replace is needed.
Have the fuel filter inspected or re‐
placed by a professional workshop. Kia
recommends to visit an authorized Kia dealer/service partner.
Fuel lines, fuel hoses and
connections
Check the fuel lines, fuel hoses and
connections for leakage and damage. Have the fuel lines, fuel hoses and con‐
nections replaced by a professional
workshop. Kia recommends to visit an authorized Kia dealer/service partner.
WARNING
nDiesel only
Never work on the injection systemwith the engine running or within 30seconds after shutting off the en‐gine. High pressure pump, rail, injec‐tors and high pressure pipes aresubject to high pressure even afterthe engine stops. The fuel jet pro‐duced by fuel leaks may cause seri‐ous injury, if it touches the body.People using pacemakers should notmore move than 30 cm closer to theECU or wiring harness within the en‐gine room while the engine is run‐ning, since the high currents in theCommon Rail system produce con‐siderable magnetic fields.
8-41
8
Maintenance