2018 KIA STONIC brake light

INTERIOR OVERVIEW
0:#
1. Inside door handle.......................... .......................... p. 4-17
2. Inner fuse panel............................ ............................ p. 8-77
3. Power window switches..................... ..................... p. 4-23
4. Power window lock button................... ................... p. 4-26
5. Outside rearview mirror control switch........ ........ p. 4-42
6. Outside rearview mirror folding switch........ ........ p. 4-44
7. Hood release lever.......................... .......................... p. 4-28
8. Fuel filler lid release lever.................... .................... p. 4-30
9. Steering wheel............................. ............................. p. 4-37
10. Steering wheel tilt control................... ................... p. 4-38
11. Headlight leveling device..................... ..................... p. 4-87
12. Instrument panel illumination control switch... ... p. 4-46
13. BCW ON/OFF button........................ ........................ p. 6-71
14. LDW ON/OFF button........................ ........................ p. 6-62
15. ESC OFF button............................. ............................. p. 6-36
16. TPMS SET switch........................... ........................... p. 7-08
17. Brake pedal................................ ................................ p. 6-30
18. Accelerator pedal
Your vehicle at a glance
2-04

INSTRUMENT PANEL OVERVIEW
0:#
1. Instrument cluster.......................... .......................... p. 4-45
2. Horn...................................... ...................................... p. 4-39
3. Driver’s front air bag........................ ........................ p. 3-46
4. Light control............................... ............................... p. 4-81Turn signals................................ ................................ p. 4-84
5. Wiper/Washer.............................. .............................. p. 4-90
6. Ignition switch.............................. .............................. p. 6-06 ENGINE START/STOP button................. ................. p. 6-10
7. Hazard warning flasher switch............... ............... p. 7-02
8. Audio
9. Central door lock switch..................... ..................... p. 4-18
10. Climate control system............... ............... p. 4-99, 4-108
11. AUX-USB port.............................. .............................. p. 5-03
12. Shift lever............................ ............................ p. 6-20, 6-24
13. Parking brake lever.................................................... p. 6-31
14. Passenger’s front air bag.................... .................... p. 3-46
15. Power outlet.............................. .............................. p. 4-129
16. Glove box................................. ................................. p. 4-122
17. Steering wheel audio remote control
18. Cigarette lighter........................... ........................... p. 4-126
19. Seat warmer.............................. .............................. p. 4-128
20. Heated steering wheel switch................ ................ p. 4-39
21. Idle Stop and Go system OFF button.......... .......... p. 6-16
22. USB charger.............................................................. p. 4-130

2-05
2
Your vehicle at a glance

HOOD
Opening the hood
0:##
1. Pull the release lever to unlatch thehood. The hood should pop open
slightly.
WARNING
Open the hood after turning off theengine on a flat surface, shifting theshift lever to the P(Park) position forautomatic transaxle and to the 1st(First) gear or R (Reverse) for man‐ual transaxle, and setting the park‐ing brake.
0:#%
2. Go to the front of the vehicle, raise the hood slightly, push the secon‐
dary latch (1) inside of the hood
center and lift the hood (2).
0:#%
3. Pull the support rod from the hood.
4. Hold the hood open with the sup‐ port rod.
WARNING
nHot parts
Grasp the support rod in the areawrapped in rubber. The rubber willhelp prevent you from being burnedby hot metal when the engine is hot.
Hood open warning (if equipped)
0:##
The warning message will appear on
the LCD display when hood is open.
The warning chime will operate when the vehicle is being driven at or above
3 km/h (2 mph) with the hood open.
Features of your vehicle
4-28

WARNING
nParking Brake & Brake FluidWarning Light
Driving the vehicle with a warninglight ON is dangerous. If the ParkingBrake & Brake Fluid Warning Light il‐luminates with the parking brake re‐leased, it indicates that the brakefluid level is low.In this case, have the vehicle inspec‐ted by a professional workshop. Kiarecommends to visit an authorizedKia dealer/service partner.
Anti-lock Brake System
(ABS) Warning Light
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
• When there is a malfunction with theABS (the normal braking system will
still be operational without the assis‐ tance of the anti-lock brake system).
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
Electronic Brake force
Distribution (EBD)
System Warning Light
These two warning lights il‐luminate at the same timewhile driving:
• When the ABS and regular brake system may not
work normally.
In this case, have the vehicle inspec‐ ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
WARNING
nElectronic Brake force Distri‐bution (EBD) system warninglight
(Continued)
(Continued)
When both ABS and Parking Brake &Brake Fluid Warning Lights are on,the brake system will not work nor‐mally and you may experience anunexpected and dangerous situationduring sudden braking.In this case, avoid high speed drivingand abrupt braking.Have the vehicle inspected by a pro‐fessional workshop as soon as possi‐ble. Kia recommends to visit an au‐thorized Kia dealer/service partner.
NOTICE
nElectronic Brake force Distri‐
bution (EBD) system warning
light
When the ABS Warning Light is on or
both ABS and Parking Brake & Brake
Fluid Warning Lights are on, the
speedometer, odometer, or tripme‐
ter may not work. Also, the EPS
Warning Light may illuminate and
(Continued)
Features of your vehicle
4-66

Daytime running light (if
equipped)
The Daytime Running Lights (DRL) can
make it easier for others to see the front of your vehicle during the day.
DRL can be helpful in many different
driving conditions, and it is especially helpful after dawn and before sunset. The DRL system turns OFF when: 1. The headlight switch is ON.
2. The engine is OFF.
3. The front fog light is on.
4. Engaging the Parking Brake
Headlight leveling device (if
equipped)
0:#
To adjust the headlight beam level ac‐
cording to the number of the passen‐ gers and loading weight in the luggage
area, turn the beam leveling switch.
The higher the number of the switch
position, the lower the headlight beam level. Always keep the headlight beam
at the proper leveling position, or head‐
lights may dazzle other road users.
Listed below are the examples of prop‐ er switch settings. For loading condi‐
tions other than those listed below, ad‐
just the switch position so that the beam level may be the nearest as the
condition obtained according to the list.
Loading conditionSwitch position
Driver only 0
Driver + Front passenger 0
Full passengers
(including driver) 1
Full passengers
(including driver) +Maximum permis‐sible loading 2
Driver + Maximumpermissible load‐ing 3


4-87
4
Features of your vehicle

BEFORE DRIVING
Before entering vehicle
• Be sure that all windows, outsidemirror(s), and outside lights are clean.
• Check the condition of the tires.
• Check under the vehicle for any sign of leaks.
• Be sure there are no obstacles behind you if you intend to back up.
Necessary inspections
Fluid levels, such as engine oil, engine
coolant, brake fluid, and washer fluid should be checked on a regular basis,
with the exact interval depending on
the fluid. Further details are provided in L

KEY POSITIONS
Ignition switch position
LOCK
0:##
5ZQF
"
-0$, "$$
0/
45"35
¥
5ZQF
#
The steering wheel locks to protect
against theft. The ignition key can be removed only in the LOCK position.
ACC (Accessory)
The steering wheel is unlocked and
electrical accessories are operative.
NOTICE
If difficulty is experienced turning
the ignition switch to the ACC posi‐
tion, turn the key while turning the
steering wheel right and left to re‐
lease the tension.
ON
The warning lights can be checked be‐
fore the engine is started. This is the normal running position after the en‐
gine is started.
Do not leave the ignition switch ON if
the engine is not running to prevent battery discharge.
START
Turn the ignition switch to the START
position to start the engine. The engine will crank until you release the key;
then it returns to the ON position. The
brake warning light can be checked in this position.
WARNING
nIgnition switch
•Never turn the ignition switch toLOCK or ACC while the vehicle ismoving. This would result in loss ofdirectional control and brakingfunction, which could cause an ac‐cident.
(Continued)
Driving your vehicle
6-06

3. Turn the ignition switch to STARTand hold it there until the engine
starts (a maximum of 10 seconds),
then release the key.
It should be started without de‐pressing the accelerator pedal.
4. Do not wait for the engine to warm up while the vehicle remains sta‐
tionary.
Start driving at moderate engine
speeds. (Steep accelerating and de‐ celerating should be avoided.)
CAUTION
If the engine stalls while you are inmotion, do not attempt to move theshift lever to the P (Park) position. Iftraffic and road conditions permit,you may put the shift lever in the N(Neutral) position while the vehicle isstill moving and turn the ignitionswitch to the START position in anattempt to restart the engine.
CAUTION
•Do not engage the starter formore than 10 seconds. If the en‐gine stalls or fails to start, wait 5to 10 seconds before re-engagingthe starter. Improper use of thestarter may damage it.
•Do not turn the ignition switch tothe START position with the en‐gine running. It may damage thestarter.
Starting the diesel engine
To start the diesel engine when the en‐
gine is cold, it has to be pre-heated be‐ fore starting the engine and then have
to be warmed up before starting to
drive. 1. Make sure the parking brake is ap‐ plied. 2.
Manual Transaxle -
Depress the
clutch pedal fully and shift the
transaxle into Neutral. Keep the
clutch pedal and brake pedal de‐ pressed while turning the ignition
switch to the start position.
Automatic Transaxle - Place the
transaxle shift lever in P(park). De‐
press the brake pedal fully.
You can also start the engine when
the shift lever is in the N(neutral) position.
8
(MPX
JOEJDBUPS
MJHIU
3. Turn the ignition switch to the ON
position to pre-heat the engine.
Then the glow indicator light will il‐
luminate.
Driving your vehicle
6-08