2017 TOYOTA AVENSIS Owners Manual (in English)

Page 553 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5538-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
8
When trouble arises
Once The driver’s door was opened
and closed with the engine
switch turned off and then the
engine switch was

Page 554 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5548-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
If you have a flat tire (vehicles with emer-
gency tire puncture repair kit)
Your vehicle is not equipped with a spare tire, but instead

Page 555 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5558-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
8
When trouble arises
●Stop the vehicle in a safe place on a hard, flat surface.
● Set the parking brake.
● Shift the shift lever t

Page 556 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5568-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
�XSedan
*1: Use of the jack and wheel nut wrench. (if equipped) (→P. 577)
A jack and wheel nut wrench can be purchased at any authorize

Page 557 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5578-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
8
When trouble arises
�XWagon
*1: Use of the jack and wheel nut wrench. (if equipped) (→P. 577)
A jack and wheel nut wrench can be purc

Page 558 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5588-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
Emergency tire puncture repair kit components
Nozzle
Stickers
Pressure release button
Power plugHose
Compressor switch
Air pressure gauge

Page 559 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5598-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
8
When trouble arises
Take out the repair kit from the tool box.
When taking out the bottle from the original bag, do not tear or discard

Page 560 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5608-2. Steps to take in an emergency
AVENSIS_OM_OM20C66E_(EE)
Connect the nozzle to the
valve.
Screw the end of the nozzle clock-
wise as far as possible.
The bottle should hang vertically
without co