2017 TOYOTA AVENSIS Owners Manual (in English)

Page 497 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 4977-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)
7
Maintenance and care
�XDriver’s side instrument panel: type B fuse box (left-hand drive
vehicles)
Remove the coin box.
�XPassenger’s s

Page 498 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 4987-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)
�XPassenger’s side instrument panel: type B fuse box (right-hand
drive vehicles)
Open the glove box. Slide off the
damper.
Push in each si

Page 499 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 4997-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)
7
Maintenance and care
Check if the fuse has blown.Normal fuse
Blown fuse
Type A and B
Replace it with one of an appropriate amperage rating

Page 500 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5007-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)
■After a fuse is replaced
●If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. ( →P. 501)

Page 501 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5017-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)
7
Maintenance and care
Light bulbs
Check the wattage of the light bulb to be replaced. (→P. 625)
→ P.  4 5 5
■Front
You may replace th

Page 502 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5027-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)■
Rear
�XSedan
�XWagon
Rear turn signal light
Back-up light (left-hand drive
vehicles)
Back-up light (right-hand drive
vehicles)
License pl

Page 503 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5037-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)
7
Maintenance and care
■Headlights (halogen bulbs)For the right side only:
Remove the securing clip
and turn and pull off the
washer fluid

Page 504 of 661

TOYOTA AVENSIS 2017  Owners Manual (in English) 5047-3. Do-it-yourself maintenance
AVENSIS_OM_OM20C66E_(EE)
Replace the light bulb, set
the connector and install the
bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn