Page 431 of 497
Display messages
Possible causes/consequences and M
MSolutions
Depress clutch fully to
start engine *Y
ou ha veattem ptedto start the engine without depressing the clutch pedal. #
Depress the clutch pedal and then start the engine.
The engine has stalled while theve hicle was pulling away, e.g. because the clutch pedal wasre leased tooqu ickl y. #
Dep ress the clutch pedal again.
The engine starts automaticall y. #
Slowly release the clutch pedal topull away.
Clutch overheated Avoid
pulling away for XX:XX mins *T
he clutch is under considerable load and is overheating.
Av oid frequent pulling away and driving at walking pace over longer dis tances. #
Stop theve hicle, paying attention toroad and traf fic conditions, and le avethe engine running.
The clutch is cooled more quickly when the engine is running.
or #
If possible, continue driving at a steady speed and remo veyour foot from the clutch pedal. Do not ride the
clutch.
The clutch is cooled while theve hicle is in motion.
When the clutch has cooled down, the display message will disappear.
Air conditioning Malfunc-
tion See Owner's Manual *O
peration of the climate control sy stem is temp orarily restricted. Air flow and fresh air supply are set toautomatic
mode. #
Have the climate control sy stem checked at a qualified specialist workshop. 428
Display messages and warning/indicator lamps
Page 432 of 497
Display messages
Possible causes/consequences and M
MSolutions
Apply brake to select R *
Yo u ha veattem ptedto shift the transmission out of position hand into transmission position k. #
Depress the brake pedal. #
Switch the transmission toposition k.
j
Operation only possible in
transmission position N *
Yo u ha veattem ptedto swivel the ball neck and the transmission is not in position i. #
Switch the transmission toposition i.
j
Operation only possible in
transmission position P *
Yo u ha veattem ptedto swivel the ball neck and the transmission is in position k,iorh. #
Depress the brake pedal. #
Switch the transmission toposition j.
_
Before starting the engine,
turn the steering wheel. *
Ve hicles with manual transmissions: the electric steering lock was unable tounlo ck th esteering. #
Switch off the ignition. #
Tounlo ckthesteering, mo vethesteering wheel slightly tothe left and right. #
Switch the ignition back on. Display messages and
warning/indicator lamps 429
Page 436 of 497
Display messages
Possible causes/consequences and M
MSolutions
& inoperative See Owner's
Man. *T
hestationary heater is temp orarily malfunctioning. #
When theve hicle is on a le vel sur face and the engine has cooled down, make up tofour attem ptsto switch on
th est ationary heater, waiting se veral minutes between each attem pt. #
Ifth est ationary heater does not swit chon, consult a qualified specialist workshop.
M *T
he bonnet is open. &
WARNING Risk of accident due todriving with the engine bonn etunlo cked
An unloc ked engine bonn etmay open up when theve hicle is in motion and block your vie w. #
Never unlock the engine bonn etwhen driving. #
Before every trip, ensure that the engine bonn etis loc ked. #
Pull over and stop theve hicle safely as soon as possible. #
Close the bonn et.
C *A
t least one door is open. #
Close all doors. Displ
aymessa ges and warning/indicator lamps 433
Page 437 of 497
Display messages
Possible causes/consequences and M
MSolutions
N *T
he boot lid is open. &
WARNING Risk ofexhaust gas poisoning
Combustion engines emit poisonous exhaust gases such as carbon monoxide. Exhaust gases can enter the
ve hicle interior if the boot lid is open when the engine is running, especially if theve hicle is in motion. #
Alw ays switch off the engine before opening the boot lid. #
Never drive with the boot lid open. #
Close the boot lid.
_ Rear left seat backrest not
locked (exa mp le) *T
he cor responding seat backrest of there ar ben chseat is not engaged. #
Foldthe cor responding seat backrest back until it engages.
¥
Top up washer fluid *T
hewasher fluid le vel in thewa sher fluid reser voir has dropped below the minimum. #
Top up thewa sher fluid . 434
Display messages and warning/indicator lamps
Page 441 of 497
Display messages
Possible causes/consequences and M
MSolutions
Adaptive Highbeam Assist
currently unavailable See
Owner's Manual *A
daptive Highbeam Assist is temp orarily una vailable.
The sy stem borders ha vebeen reached (→ page132). #
Drive on.
Once the cause of the problem is no longer present, the sy stem will be available again. The Adaptive Highbeam
Assist available again display message appears.
Adaptive Highbeam Assist
Camera view restricted
See Owner's Manual *T
he camera view is restricted. Possible causes:
R dirt on the windscreen in the camera's field of vision
R heavy rain, snow or fog
Driving sy stems and driving saf ety sy stems may be malfunctioning or temp orarily una vailable.
Once the cause of the problem is no longer present, driving sy stems and driving saf ety sy stems will become availa‐
ble again.
If th e display message does not disappear: #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions. #
Clean the windscreen. Wa
rning and indicator lamps Overview of
warning and indicator lamps Some sy
stems per form a self-test when the igni‐
tion is switched on. Some warning and indicator lamps may briefly light up or
flash. This behav‐
iour is non-critical. These warning and indicator
lamps indicate a malfunction only if they light up
or flash af terth e engine is star ted or during a
journe y. 438
Display messages and warning/indicator lamps
Page 442 of 497
Instrument display (standard)
Instrument display in
the widescreen cockpit Prog
ressive setting in the widescreen cock‐
pit If
yo u select the progressive display setting in
ve hicles with a widescreen cockpit, the positions
of the indicator lamps on the instrument display
ch ange.
Wa rning and indicator lamps:
L Dipped beam (→
page127)
T St
anding lights (→ page127)
K Main beam (→
page129)
#! Tu
rn signal light (→ page129)
R Re
ar fog lights (→ page127) ü
Seat belt is not
fastened
(→ page 446)
J Brakes (red) (→
page 440)
J Brakes (yell
ow) (→ page 440)
! ABS malfunction (→
page 440)
à AIR
BODY CONTROL malfunction
(→ page 447)
à DY
NA MIC BODY CONTROL malfunc‐
tion (→ page447)
÷ ESP®
(→ page 440)
å ESP®
OFF (→ page 440)
! Electric pa
rking brake (→ page440)
Ð St
eering assis tance malfunction
(→ page 449)
# Electrical
fault (→ page 451)
6 Re
stra int sy stem (→ page440)
; Engine diagnostics (→
page 451)
8 Fu
elreser vewith fuel filler flap loca‐
tion indicator (→ page 451)
? Coolant
too hot/cold (→ page 451)
· Dis
tance warning (→ page447) Displ
aymessa ges and warning/indicator lamps 439
Page 443 of 497
%
Preglow
h Ty
re pressure monitoring sy stem
(→ page 454) j
Tr
ailer hit chis not operational or is
swivelling (→ page449) Sa
fet y sy stems Wa
rning/indicator lamp
Possible causes/consequences and M
MSolutions
J Brake sy stem warning lamp
(yellow) The
yellow brake sy stem warning lamp is lit while the engine is running. &
WARNING Risk of an accident due toa brake sy stem malfunction
If th e brake sy stem is malfunctioning, braking characteristics may be impaired. #
Drive on carefull y. #
Have the brake sy stem checked immediately at a qualified specialist workshop. #
Adjust your speed and continue todrive carefull y,leaving a suitable dis tance totheve hicle in front. #
Ifth e multifunction display sho wsa display message, please obse rveth is. #
Consult a qualified specialist workshop. 440
Displaymessa ges and warning/indicator lamps
Page 444 of 497
Wa
rning/indicator lamp
Possible causes/consequences and M
MSolutions
J Brake sy stem warning lamp
(red) The
red brake sy stem warning lamp is lit while the engine is running.
Po ssible causes:
R The brake forc e boosting is malfunctioning and the braking characteristics may be af fected.
R The reis insuf ficient brake fluid in the brake fluid reser voir. &
WARNING Thereis a risk of an accident if brake forc e boosting is malfunctioning
If brake forc e boosting is malfunctioning, increased brake pedal forc e may be necessary for braking. Braking char‐
acteristics may be impaired. The braking dis tance may increase in an eme rgency braking situation. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions. Do
not continue driving under any circums tances. #
Consult a qualified specialist workshop. &
WARNING Risk of an accident due tolow brake fluid le vel
If th e brake fluid le vel is too lo w,the braking ef fect and the braking characteristics may be impaired. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions. Do
not continue driving under any circums tances. #
Consult a qualified specialist workshop.
Do not top up the brake fluid. Display messages and
warning/indicator lamps 441
