2017 KIA OPTIMA PLUG-IN HYBRID ECO mode

Trip A/B
0+'-
Tripmeter (1)
• The tripmeter is the total driving dis‐ tance since the last tripmeter reset.- Distance range: 0.0 ~ 9999.9 km or mi.
• To reset the tripmeter, press the OK button (reset) on the steering wheelfor more than 1 second when the
tripmeter is displayed.
Average Vehicle Speed (2)
• The average vehicle speed is calcula‐ ted by the total driving distance and
driving time since the last average
vehicle speed reset. - Speed range: 0 ~ 260 km/h or 0 ~
160 mph
• To reset the average vehicle speed, press the OK button (reset) on the
steering wheel for more than 1 sec‐
ond when the average vehicle speed
is displayed.
NOTICE
•The average vehicle speed is not
displayed if the driving distance
has been less than 50 meters
(0.03 miles) or the driving time
has been less than 10 seconds
since the ignition switch or Engine
Start/Stop button was turned to
ON.
•Even if the vehicle is not in motion,
the average vehicle speed keeps
calculating, as long as while the
engine is running.
Elapsed Time (3)
• The elapsed time is the total driving time since the last elapsed time re‐
set. - Time range (hh:mm): 00:00 ~ 99:59 • To reset the elapsed time, press the
OK button (reset) on the steering
wheel for more than 1 second when
the elapsed time is displayed.
NOTICE
Even if the vehicle is not in motion,
the elapsed time keeps calculating,
as long as the engine is running.
Digital speedometer
This mode displays the current speed
of the vehicle.
Features of your vehicle
5-66

One time driving information mode
0+')1-
This display shows trip distance (1),
average fuel economy (2) and the vehi‐ cle can be driven with the remaining
fuel (3).
This information is displayed for a few
seconds when you turn off the engine and then goes off automatically. The
information provided is calculated ac‐
cording to each trip.
If the estimated distance is below 1 km (1 mi.), the distance to empty (3) will
display as L

Check high beam assist system (if
equipped)
• This warning message illuminates ifthe high beam assist system has a
malfunction.
In this case, we recommend that you
have the vehicle inspected by an au‐ thorized Kia dealer.
Low fuel
• This warning message illuminates if the fuel tank is nearly empty.- When the low fuel level warning light is illuminated.
Add fuel as soon as possible.
Device in wireless charger (if
equipped)
If a smart phone is still left on the wire‐
less charging pad unattended, even when the Engine Start/Stop button is
turned to the ACC or OFF position, and
the instrument panel's one time driving information mode has finished, a warn‐
ing message will light up on the instru‐
ment panel.
For more details, refer to L

You should refill the fuel tank to pre‐
vent hybrid battery damage.
Refill inverter coolant
This warning message illuminates when
the inverter coolant is nearly empty.
You should refill the inverter coolant.
Check brakes
This warning message illuminates when
the brake performance is low or the re‐ generative brake does not work prop‐
erly due to a failure in the brake sys‐
tem.
In this case, it may take longer for the brake pedal to operate and the braking
distance may become longer.
Stop vehicle and check brakes
This warning message is displayed
when a failure occurs in the brake sys‐ tem.
In this case, park the vehicle in a safe
location and we recommend you to tow
your vehicle to the nearest authorized Kia dealer and have the vehicle inspec‐
ted.
Coasting guide (if equipped)
A chime will sound and the coasting
guide indicator will blink four times to inform the driver when to take the foot
off from the accelerator by anticipating
a decelerating event* based on the analysis of driving routes and road con‐
ditions of the navigation. It encourages
the driver to remove foot from the pedal and allow coasting down the road
with EV motor only. This helps prevent
unnecessary fuel consumption and in‐ creases fuel efficiency. ❈ Example of a deceleration event is
going down an extended hill, slow‐ ing down approaching a toll booth,
and approaching reduced speed
zones.
• User settings
Press the Engine Start/Stop button
and put the shift lever in P (Park). In
the User Settings Mode, select Driv‐
ing Assist, Coasting Guide, and then On to turn on the system. Cancel the
selection of coasting guide to turn off
the system. For the explanation of
the system, press and hold the [OK]
button.
• Operation conditions To activate the system, take the fol‐
lowing procedures. Enter your desti‐
nation information on the navigation
and select the driving route. Select the ECO mode in the Integrated Driv‐
ing Control System. Then, satisfy the
following. - The driving speed should be be‐ tween 60 km/h (37 mph) and
160 km/h (99 mph).
❈ The operating speed may vary due
to difference between instrument
cluster and navigation effected by
tire inflation level.
Unplug vehicle to start (Plug-in
Hybrid)
The message is displayed when you
start the engine without unplugging
the charging cable. Unplug the charging
cable, and then start the vehicle.
Remaining charge time (Plug-in
Hybrid)
The message is displayed to notify the
remaining time to fully charge the bat‐ tery.
Shift to P to charge (Plug-in
Hybrid)
The message is displayed when the
charging connector is plugged with the
shift lever in R (Reverse), N (Neutral) or
D (Drive). Move the shift lever to P
(Park) and re-start the charging proc‐ ess.
Features of your vehicle
5-76

EV/HEV/CHG modes (Plug-in
Hybrid)
A corresponding message is displayed
when a mode is selected by pressing the HEV button.
Battery charged. Maintaining
current (Plug-in Hybrid)
This message is displayed when unable
to convert to charging mode even when pressing and holding the HEV button
during EV/HEV mode driving because
the high-voltage (hybrid) battery is al‐ ready fully charged.
Low battery. Maintaining hybrid
(Plug-in Hybrid)
This message is displayed when unable
to convert to EV mode even when
pressing the HEV button during HEV
mode driving due to insufficient high-
voltage (hybrid) battery level.
Low battery temp. Maintaining
current (Plug-in Hybrid)
This message is displayed when unable
to convert to EV mode even when pressing the HEV button during HEV
mode driving due to low battery tem‐
perature.
Charging complete. Switching to
hybrid (Plug-in Hybrid)
This message is displayed automatical‐
ly converting to HEV mode due to com‐
pleted battery charging during charging mode driving.
Charger error! (Plug-in Hybrid)
This message is displayed when the
charging failed by external charger er‐ ror.
The purpose of this message is to let
you know the error has occurred in
charger itself not in vehicle.
Low/high system temp.
Maintaining hybrid (Plug-in Hybrid)
This message is displayed when unable
to convert to EV mode even when pressing the HEV button during HEV
mode driving due to low/high system
temperature.
Switching to hybrid mode to allow
heating (Plug-in Hybrid)
• When the coolant temperature is lower than -14°C (57°F), and you
turn the climate control On for heat‐ ing, the above message will be dis‐
played in the cluster. Then, the vehi‐
cle will automatically switch to HEV
mode. • When the coolant temperature is
higher than -14°C (57°F), or you turnthe climate control Off, the vehicle
will automatically return to EV mode.
Wait until fuel door opens (Plug-in
Hybrid)
The message is displayed when you at‐
tempt to open the fuel filler lid with the fuel tank pressurized. Wait until the
fuel tank is depressurized.
NOTICE
•It may take up to 20 seconds to
open fuel filler lid.
•When the fuel filler lid is frozen
and does not open after 20 sec‐
onds at freezing temperature,
slightly tap the fuel filler lid and
then attempt to open it.
Fuel door open (Plug-in Hybrid)
This message is displayed when the
fuel filler lid is opened.
Also means "Ready to refuel".

5-77
5
Features of your vehicle

(Continued)
0+'-
8.Leaving a parking space near awallWhen leaving a parking spacethat is narrow and near a wall,the system may not work prop‐erly. When leaving a parkingspace similar to the above pic‐ture, the driver must watch outfor obstacles while leaving.
How the system works (Parking
Mode)
1. Activate the Smart Parking AssistSystem
The shift lever should be placed in
D (Drive), N (Neutral, above
5 km/h). 2. Select parking mode
3. (Optional) Search for parking space
(slowly move forward.)
4. (Optional) Search complete (auto‐ matic search by sensor.)
5. Steering wheel control 1. Shift according to the instructionon the LCD display.
2. Drive slowly with the brake pedal applied.
6. Parking complete
7. If necessary, manually adjust posi‐ tion of vehicle.
If the system already recognized park‐ ing space before activating the Smart
Parking Assist System, you can proceed
from step 4 (Search complete).
NOTICE
•Before activating the system
check if the conditions are possible
to use the system.
•For your safety, always apply the
brake pedal except for when driv‐
ing.
1. Activate Smart Parking Assist
System
0+'-
• Press the Smart Parking Assist Sys‐ tem button (the button indicator will
illuminate).
• The Parking Assist System will be ac‐ tivated.
A warning sound will be heard if an
obstacle is detected.
• Press the Smart Parking Assist Sys‐ tem button
again for more than 2
seconds to turn off the system.
• The Smart Parking Assist System de‐ faults to the OFF position whenever
the ignition switch is turned on.
Features of your vehicle
5-100

2. Select parking mode
• Select parallel mode or reverse modeby pressing the Smart Parking Assist
System button with the shift lever in
D (Drive), N (Neutral, above 5 km/h)
and the brake pedal depressed.
• If the system already recognized parking space before activating the
Smart Parking Assist System, you
can see L

0+'-
When the Smart Parking Assist System
is operating, a message may appear re‐ gardless of the parking order.
The messages will appear according to
the circumstances. Follow the instruc‐
tions provided while parking your vehi‐ cle with the Smart Parking Assist Sys‐
tem.
NOTICE
•In the below conditions the system
will be cancelled. Park your vehicle
manually.
(Continued)
(Continued)
-When the ABS is activated
-When the TCS/ESC is turned off
•When vehicle speed is above
20 km/h while searching for a
parking space a message "Reduce
speed" will appear.
•In the below condition the system
will not activate
-When the TCS/ESC is turned off
System malfunction
0+'-
• If there is a problem with the system, when the system is turned on, the
above message will appear. Also, the indicator on the button will not light
up and a beep sound will be heard 3
times.
• If there is a problem with only the Smart Parking Assist System, the
Parking Assist System will operate after 2 seconds.
If you notice any problem, we recom‐
mend to have the system checked by
an authorized Kia dealer.
How the system works (Exit
mode)
The Exit Mode operates in the below
condition: • When vehicle speed is below 5 km/h the first time after the engine has
been started.
• After parallel parking is completed with the Smart Parking Assist Sys‐
tem.
1. Activate the Smart Parking Assist System
The shift lever should be placed in P
(Park) or N (Neutral).
2. Select Exit Mode
Features of your vehicle
5-106