2017 Citroen C5 Owner's Manual

15
C5 _en_Chap01_instruments-bord_ed01-2016
* Only with the Audio system .
The instrument screen A is located in the
centre of the instrument panel.
-

W

ith the vehicle stationary, you can access
the main menu of the screen by quickly
pressing on the left-hand thumb wheel B
on the steering wheel.
-

W

hilst driving, the message "Action
impossible while driving" is displayed in
the instrument panel if you try to open the
main menu.
"Vehicle parameters" menu*
This allows you to access the settings for
certain functions, grouped by category:
-

A
ccess to the vehicle.
-
L

ighting.
-

D
riving assistance.
"Choice of language" menu
This allows you to choose the display and voice
recognition language.
Main menu
The main menu allows you to programme
certain vehicle functions* and the instrument
panel screen:
"Choice of units" menu
This allows you to choose metric or imperial
units.
1
Instruments

16
C5 _en_Chap01_instruments-bord_ed01-2016
Driving assistance
With this menu selected, you can:
F a ctivate or deactivate the operation of the
rear wiper in reverse gear.
For more information on the
Wiper control stalk , refer to the
corresponding section.
** Depending on the country of sale.
Access to the vehicle
With this menu selected, you can:
F a ctivate or deactivate the driver welcome
function.
For more information on Ease of use and
comfort , refer to the corresponding section.
F

s
elect the unlocking of all doors or just the
driver's door.
For more information on Access , refer to the
corresponding section.
F

a
ctivate or deactivate the automatic
operation of the electric parking brake**.
For more information on Driving , refer to the
corresponding section.
Lighting
With this menu selected, you can:
F a ctivate or deactivate the operation of the
daytime running lamps**.
F

a
ctivate or deactivate the guide-me-home
lighting and set its period of operation.
F

a
ctivate or deactivate the directional
headlamps.
For more information on the Lighting
control stalk (in particular on the
daytime running lamps and automatic
guide-me-home lighting) or the
Directional lighting , refer to the
corresponding section.
Instruments

17
C5 _en_Chap01_instruments-bord_ed01-2016
System that gives you information on the current journey (range, fuel consumption…).
In the instrument panel screen
Information displays
F Turn the left-hand thumb wheel A on the steering wheel to display the various trip
computer tabs in succession:
Trip computer
- The current information tab is displayed in zone B of the instrument panel screen, with:
●

t
he range,
●

t
he current fuel consumption,
●

t
he digital speed reading or the Stop &
Start time counter.
-

T
he trip "1" tab is displayed in zone C of
the instrument panel screen, with:
●

t
he distance travelled,
●

t
he average fuel consumption,
●

t
he average speed,
f

or the first trip.
-

T
he trip "2" tab is displayed in zone C of
the instrument panel screen, with:
●

t
he distance travelled,
●

t
he average fuel consumption,
●

t
he average speed,
f

or the second trip.
Trip reset
F When the trip required is displayed, press the left-hand thumb wheel on the steering
wheel for more than two seconds.
Tr i p s "1" and "2" are independent but their use
is identical.
For example, trip "1" can be used for daily
figures and trip "2" for monthly figures.
1
Instruments

18
C5 _en_Chap01_instruments-bord_ed01-2016
In the touch screen tablet
Information display
F Press the MENU button. -
T
he current information tab with:
●
t
he range,
●
t
he current fuel consumption,
●
t
he Stop & Start time counter.
-
T
he trip "1"
tab with:
●
t
he average fuel consumption,
●
t
he distance travelled,
●
t
he average speed,
f

or the first trip.
- T he trip "2"
tab with:
● t he average fuel consumption,
●

t
he distance travelled,
●

t
he average speed,
f

or the second trip.
Trip reset
F When the desired trip is displayed, press the reset button.
F

Sel

ect " Driving " to display the
various tabs.
F

S

elect the desired tab using your finger. For example, trip "1"
can be used for daily
figures, and trip "2" for monthly figures.
Tr i p s "1"
and "2" are independent but their use
is identical.
Instruments

19
C5 _en_Chap01_instruments-bord_ed01-2016
A few definitions…
Range
(miles or km)
The distance which can still be
travelled with the fuel remaining
in the tank (at the average fuel
consumption seen over the last
few miles (kilometres) travelled).
Current fuel
consumption
(mpg or l/100 km or km/l)
Calculated over the last few seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
Calculated since the last trip
computer reset.
Distance travelled
(miles or km)
Calculated since the last trip
computer reset.
When the range falls below 20 miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the
range is recalculated and is displayed if it
exceeds 60 miles (100 km).
Stop & Start time
counter
(minutes / seconds or hours /
m inutes)
If your vehicle is fitted with
Stop & Start, a time counter
calculates the time spent in
STOP mode during a journey.
It resets to zero every time the
ignition is switched on with
the
key.
This function is only displayed from
20

mph (30 km/h).
This value may vary following a change
in the style of driving or the relief,
resulting in a significant change in the
current fuel consumption.
If dashes are displayed continuously
while driving in place of the digits,
contact a CITROËN dealer or a
qualified workshop.
Average speed
(mph or km/h)
Calculated since the last trip
computer reset.
1
Instruments

20
C5 _en_Chap01_instruments-bord_ed01-2016
Return to the main
instrument panel screen
display
Successive rotations of the left-hand thumb
wheel on the steering wheel allow you to return
to the main instrument panel screen display
(vehicle speed), via the navigation information
screen, then the screen displaying only the
total mileage and the trip mileage (bottom of
screen).You can display navigation information in
the
instrument panel screen by rotating the
left-hand thumb wheel on the steering wheel. This function allows you to check certain
indicators and display the log of alerts.
F

P
ress on button A.
The following information appears in turn in the
instrument panel screen:
-

R
epeat of the service indicator.
-

R
epeat of the range indicator for the
AdBlue
® and the SCR system for BlueHDi
Diesel versions.
-

R

epeat of the engine oil level indicator.
-

A

ny alert messages.
Check function
Display of navigation
information in the
instrument panel screen
Instruments

21
C5 _en_Chap01_instruments-bord_ed01-2016
Engine oil temperature
gauge
Under normal operating conditions, the bars
should be within section 1.
In severe operating conditions, the bars may
extend into section 2 .
In this event, slow down, and if necessary,
stop the engine and check the levels (see the
corresponding section).
Coolant temperature
gauge
Under normal operating conditions, the bars
should be within section 1 .
In severe operating conditions, the bars may
extend into section 2 , the engine coolant
temperature warning lamp A and the STOP
warning lamp come on in the instrument panel.
Stop as soon as it is safe to do so . Switch off
the ignition. The cooling fan may continue to
operate for a cer tain time .
Contact a CITROËN dealer or a qualified
workshop.
If the SERVICE warning lamp comes on, check
the levels (see the corresponding section). On horizontal ground, illumination of the fuel
low warning lamp indicates that you are at the
reser ve level.
An alert message is displayed in the instrument
panel.
Fuel gauge
Indicators
1
Instruments

22
C5 _en_Chap01_instruments-bord_ed01-2016
More than 1 700 miles (3 000 km)
remain before the next service
is due
When the ignition is switched on, no service
information appears in the instrument panel
screen.
Between 600 miles (1 000 km) and 1 800 miles
(3 000 km) remain before the next service is due
For a few seconds after the ignition is switched
on, the spanner symbolising the service
operations comes on and a message is
displayed in the instrument panel indicating
the distance or time remaining before the next
service is due.
Example: 1 900 miles (2 800 km) remain
before the next service is due.
When the ignition is switched on, the
instrument panel screen temporarily indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
For a few seconds after the ignition is switched
on, the spanner symbolising the service
operations flashes and a message is displayed
in the instrument panel indicating the distance or
time remaining before the next service is due.
Example: 500 miles (900 km) remain before the
next service is due.
When the ignition is switched on, the instrument
panel screen indicates for a few seconds:
After the message disappears, the spanner
remains on alongside the mileage recorder as
a reminder that a service must be carried out
soon.
Service indicator
System which informs the driver when the
next service is due, in accordance with the
manufacturer's service schedule.
The point at which the service is due is
calculated from the last service indicator reset
to zero, according to the mileage covered and
the time elapsed since the last service.
A few seconds after the ignition is switched on,
the spanner goes off.
For BlueHDi Diesel versions, depending
on the country of sale, the degree of
deterioration of the engine oil may also
be taken into account.
Instruments