2017 AUDI Q3 light

Lights and Vision
@ Tips
-You can also use the service position, for ex­
ample, if you want to protect the windsh ield
from icing by using a cover.
- You cannot activate the service position
when the hood is open.
Replacing rear wiper blades
Fig . 44 Rear window wiper: removing the wiper blade
Removing th e wiper blade
16 M 0 ci: (X) a,
• Fo ld the w iper arm away from the rear window.
• Pull the wiper blade and holder out of the
mount.
Installing th e wiper blade
• Press the wiper b lade retainer in the direction
of the ar row into the mount.
• Fo ld the window wiper arm back onto the rear
window.
A WARNING
For safety reasons, the windshie ld wiper
blades should be replaced once or tw ice each
year.
42
Digital compass
Switching the compass on and off
App lies to: vehicles with digital compass
Fig. 45 Rearv iew m ir ror : d ig ita l compass is sw itched on
• To turn the compass in the mirror on or off,
press the butto n@ unt il the compass display
in the mir ror appears or d isappears.
0 N
I .,
The digital compass on ly works when the ignit ion
i s turned on. The directions are indicated with ab­
brev iat ions:
N (north), NE (northeast), E (east),
S E (southeast), S (south), SW (southwest), W
(wes t), NW (no rthwest).
(D Tips
To preve nt inaccurate compass read ings, do
n ot br ing any remote cont ro ls, elect rical dev i­
ces or metallic objects near the mirror.

a:,
a:,
...... N r--. N
'"' 0 0 ::, a:,
Adjusting the magnetic zone
Applies to: vehicles with digital compass
The magnetic zone must be adjusted correctly
for the compass to read accurately .
®
Fig. 46 Nort h Americ a: magn etic zone map
• Press and hold the button @i=> fig. 46 unt il the
number of the selected magnetic zone appears
in the rearv iew mirror.
• Press the button @repeatedly to select the
correct magnetic field zone . T he select io n
mode t urns off after a few seconds.
Calibrating the compass
Applies to: vehicles with digital compass
You must recalibrate the compass if it does not
display the correct direction .
• Press and hold the button @i=> page 42, fig . 45
unt il a C appears in the interior rearview mirror .
• Drive in a c ircle at about 6 mph ( 10 km/h) unt il
a d irection is disp layed in the rea rview mirror.
_& WARNING ,___
- T o reduce the risk to you rself and other driv­
ers, calibrate the compass i n an area where
there is no traffic.
Lights and V ision
-Always pay attention to the traffic and the
area around your vehicle if you are read ing
the compass while dr iv ing .
43

Sea ts and stor age
• To switch the cooling* on, turn the knob @
counter-clockwise. The symbo ls on the knob
must appear as they do in¢
fig. 56.
• To switch the cooling* off, turn the knob@
clockwise.
• To close the glove compartment, swing the lid
upwa rd unt il it clicks into place.
A WARNING
-
Always leave the lid on the glove compart­
ment cover closed while drivi ng to reduce the
r isk of injury.
Additional compartments
You will find a variety of storage compartments
and holders at various locations in the vehicle .
- In the doo r trim pane ls.
- In the center console .
- On the side of the front seats*. The sliding com-
partment can hold a maximum of 3 .3 lbs (1.5
kg) and the folding compartment can ho ld 2.2
lbs (1 kg).
- Nets* on the backrests of the front seats
- Garment hooks next to and above the rear
doors.
- Bag/secur ing hooks in luggage compartment.
A WARNING
- Make sure that the view to the rear is not
obstructed by hanging garments.
- Hang only lightwe ight cloth ing and be sure
that there are no heavy or sharp-edged ob­
jects in the pockets.
- Do not use coat hangers to hang the cloth­
ing because t his could impair the effective­
ness of the s ide air bags *.
- Only use the storage compartments in the
door trim panels to store small objects that
will not stick out of the compa rtment and
impa ir the range of the side a irbags.
- When driving, do not leave any hard objects
on the rear window shelf or a llow your pet
to sit on the she lf. They could restr ict o r
block the driver 's vision in the rear view mir ­
ror and become a hazard for vehicle occu-
48
pants in the event of sudden braking or a
crash.
(D Note
Objects located on the rear she lf that rub
against the rear window could damage the heating wires for the rear window defogger.
(D Tips
A vent slot is located between the shel f and
the rear window. Do not b lock the vent with
any items you may place on the rear window
shelf.
Luggage compartment
General information
A WARNING
Read and follow the important safety precau­
tions in¢
page 105, Loading the luggage
compartment.
Luggage compartment cover
App lies to: vehicles with lu ggage compartment cover
Fig . 5 7 Luggage compartment: cover attac hed
Fig . 58 Right front section of the luggage compartment:
remov ing the luggage compartment cover
! co Cll

a:,
a:,
...... N r--. N .-< 0 0 ::, a:,
Loading
• Press the release button in the luggage com­
partment
c:> fig. 62 and fold the pass-through
toward the front.
• Push the ski bag through the op ening from the
luggage compartment . T he zipper must face
toward the rear
c:> ,& .
Securing
• Stick the strap @on th e bag in the center safe­
ty belt @c:> fig. 63.
• Tighten and secure the strap©
A WARNING
-The ski sack is intended only for the trans­
portation of skis and other light objects. To
reduce the risk of serious personal injury,
never transport heavy or pointed objects in
the ski sack.
- When braking rapidly or during an accident ,
the load could be displaced and cause injury
to occupants.
- Sharp edges on the load must be covered
for protection. Always fasten the belt tight­
ly around the sack and its contents
c:>fig . 63.
- For safety reasons, do not transport more
than two pairs of skis in the ski sack .
- You must secure the ski sack with the strap
after loading.
- Make sure all objects that you are transport­
ing in the pass-through are secured. Other­
wise they could slide around during sudden
braking maneuvers and cause injury .
(D Tips
-Only fold the bag up if it is dry.
- When transporting skis or snowboards, tighten the securing strap between the
bindings.
- Lay skis in the bag with the points facing
forward and snowboards and ski pole points
facing the rear.
-
Seats and storage
Reversible cargo floor
Applies to: vehicles with reversible cargo floor
Fig. 64 Lug gag e compar tmen t: reve rs ibl e ca rgo area floor
w ith the decora tive s ide faci ng up
Reversing the cargo area floor
You can use the reversible cargo area floor with
the dirt-resistant side or the decorative side .
.,. To turn up the dirt-resistant side, pull the cargo
floor up at the handle c:>
fig. 64 and out toward
the rear . Or
.,. To turn up the decorative side , take out the car­
go floor at both handles on the left and right
side.
• Reinsert the cargo floor.
Roof rack
Fig. 65 Attachme nt points for the roof rack
If luggage or cargo is to be carried on the roof,
you must observe the following :
- Only a specially designed roof rack may be used on your vehicle . These roof racks are the basis
for a complete roof rack system. Additional at­
tachments/carrier systems are necessary to
transport luggage and sports equipment . We
recommend roof racks and attachments from
the Audi Genuine Accessories program. ..,.
51

Warm and cold
Manual climate control system
Applies to: vehicles with manual climate control system
Fig. 66 Ma nua l climate control system controls
The functions can be switched on and off by
p ressing the buttons o r adjusted us ing the dia l
and thumbwheel. The LED in a button will light
up when t he f unction is switc hed on .
Manual climate control system
For a comfort able temperature, we recommend :
- in warmer times of t he yea r, set the tempe ra-
ture s o that it is only a few degree s below t he
o utsi de tem pera ture .
- set the blo wer at a moder ate speed
- don't direct t he a ir flow directly on the passen -
ger s
IA /C l Switching the cooling mode on and off
The cooling mode only funct ions w ith the blower
tur ned on. The air is not cooled and hum idity is
not removed when cooli ng mode is switched off.
This can caus e fog on the wi ndows. The cooling
mo de switc hes off automa tically w hen there are
cold ou tside tempe ratures.
54
1-1 Switching recirculation mode on and off
I n re circu lat io n mo de, the air ins ide the vehicle i s
c ir culated and filtered. This prevents the unf il­
te red air ou ts ide t he ve hicle from enterin g the
vehicle inte rior. We recommen d sw itching rec ir­
cu lation mode on when driving throug h a t unnel
or when sitt ing in traffic¢ &. If recircu lation
mode is switched on before t he eng ine sta rts, it
will be switched off automatically afte r approxi­
ma tely 20 minu tes.
The
l"""I button switches off the recirculat io n
mode .
~ Adjusting the blower
You can adjust the blowe r from Oto III! usi ng
the dial. T he b lower sho uld a lways run at a low
setting to prevent t he windows from fogging and
to ensure a cont inuous exchange of a ir inside the
vehicle . When t he w indows are fogged, us ing a
higher blower sp eed and se tting the knob to® is
r ecommende d. ..,.

Warm and cold
Automatic climate control system
Applies to: vehicles with automatic climate control
Pressing the IAU TO I button and setting the temperature to +72 °F (22 °C) is recommended.
Fig . 67 Au to m atic cli mate co ntrol system contro ls
Press the buttons to turn the functions on or off .
The LED in a button will light up when the func­
tion is sw itched on.
IO FF ! Switching the climate cont rol s ystem
on and off
The IO FFI button switches the cl imate contro l
system on or off. Airflow from outside is b locked
when the climate con trol system is switched off .
IA/Cl Switching the cooling mode on and off
The air is not cooled and humidity is not removed
when cooling mode is switched off. This can
cause fog on the windows . The cooling mode
sw itches off automatically when the re are cold
ou tside temperat ures .
1.,,.,. 1 Switching recirculation mode on and off
To switch on the rec irculat ion mode, press the
ldb •I but ton . The lower LED in the button t urns on .
I n recirculation mode, the a ir inside the vehicle is
56
c irculated and filtered . This prevents the unf il­
te red air outs ide the veh icle from entering the
vehicle inte rior. We recommend sw itching re cir­
cu lation mode on when d riving through a t unnel
o r when si tt ing in traffic ~.&. .
The
! AUTO I b utton or~ button switches rec i rcu­
l at ion mode off.
T o switc h on the automat ic recirculation mode,
press the
l dbA I button again . T he upper LED in the
button turns on . Recirculation mode sw itches on
automat ica lly when the eng ine is cold, if you are
dr iv ing in reverse. The a ir quality sensor that is
designed for d iesel and gasoline exhaust auto­
matically sw itches the recircu lation mode on or
off depend ing on the level of pollutants in t he
outside air. Automatic recircu lation mode is time
restricted when cooling mode (A/C) is switched
off and frost temperatures are iden tified.
IJ,-

Driving
Driving
General information
Breaking in
A new vehicle must be broken in, and the break­ in distance should be 1,000 miles (1,500 km).
For the first 600 miles (1,000 km), do not drive
at speeds that are more than 2/3 of the maxi­
mum permitted RPM, avoid full acceleration and
do not tow a trailer. You may gradually start in­
creasing the RPM and the speed between 600 miles (1,000 km) and 1,000 miles (1,500 km) .
During the first hours of use, the engine has a
higher internal friction than later on when all
moving parts have settled into place with each
other.
How the vehicle is driven during the first 1,000
miles (1,500 km) also affects the engine quality.
Drive at moderate engine speeds after the initial
break-in period, particularly when running a cold
engine . This will reduce engine wear and improve
the mileage .
Do not drive at too
low of an engine speed (rpm).
Shift down if the engine stops running "smooth­ ly". Extremely high engine speeds are automati­
cally reduced .
Avoid damaging the vehicle
When you are driving on poor roads, or over
curbs, steep ramps , etc., make certain that low­
lying parts such as spoilers and exhaust system
parts do not bottom out and get damaged.
This is especially true for vehicles with low-slung
chassis (sports chassis)* and fully loaded
vehicles.
Driving through water on roads
Note the following to reduce the risk of vehicle
damage when driving through water, for example
on flooded roads:
- The water must not be any higher than the bot­
tom of the vehicle body.
- Do not drive faster than walking speed.
58
A WARNING ,_
After driving through water or mud, the effec­
tiveness of the brakes may be reduced due to
moisture on the brake rotors and brake pads.
A few careful brake applications should dry
off the brakes.
([) Note
Vehicle components such as the engine,
transmission, suspension or electrical system
can be severely damaged by driving through
water.
(D Tips
- Determine the depth before driving through
water.
- Do not stop the vehicle, drive in reverse or
switch the engine off when driving through
water.
- Keep in mind that oncoming vehicles may
create waves that raise the water level and
make it too deep for your vehicle to drive
through safely.
-Avoid driving through salt water, because
this can cause corrosion.
Economical and environmentally-friendly
driving
The amount of fuel consumption, the environ­
mental impact and the wear to the engine,
brakes and tires depends mostly on your driving
style . With an anticipatory and economic driving
style, fuel consumption can be reduced by ap­ proximately 10-15%. The following tips will help
you conserve the environment and your money at
the same time.
Anticipatory driving
A vehicle uses the most fuel when accelerating .
When you drive with anticipation, you do not need to brake as often and so you accelerate less.
When possible , let your vehicle coast with a gear
engaged, for example, when you notice that the
next traffic light is red. This produces an engine
braking effect, which helps to protect the brakes
and tires and reduces the emissions and fuel
...

00
00
......
"' ,....
"' ...... 0 0 :::,
00
consumption to zero (fuel shut-off during decel­
eration).
Shift efficiently
An effective way to save fuel is to upshift earlier .
Staying in a gear too long uses fuel unnecessari­
ly. Press down on the accelerator pedal slowly
and avoid "kick-down".
Avoid full acceleration
You should rarely travel at the maximum vehicle
speed. High speeds cause a disproportionately
high increase in fuel consumption, emissions and
traffic noise. Slower driving saves fuel.
Reduce idling time
There are benefits to stopping the engine, for ex­
ample when at railroad crossings or traffic lights
with longer red lights. Stopping the engine for
30-40 seconds already saves more fuel than the
amount of extra fuel needed to restart the en­
gine.
It takes a very long time in idle to warm the en­
gine up to operating temperature . Wear and
emissions are especially high in the warm-up
phase. Therefore, you should begin driving im­
mediately after starting the engine. Avoid high
RPMs while doing this.
Have maintenance performed regularly
By having maintenance performed regularly on
your vehicle, you can help to reduce fuel con­
sumption before you even start to drive. The maintenance condition of your vehicle not only
affects traffic safety and long-term value but al­
so impacts
fuel consumption. A poorly main­
tained engine can lead to fuel consumption that
is 10% higher than normal.
Also check the
oil level when refueling. The oil
consumption
depends largely on the engine load
and speed . It is normal for the oil consumption
of a new engine to reach its lowest point only af­
ter a certain amount of use. Therefore, the oil
consumption can only be properly judged after
approximately 3,000 miles (5,000 km) have been
driven.
Driving
Fewer short trips
The engine and catalytic converter have to reach
their optimal
operating temperature to reduce
fuel consumption and noxious emissions effec­
tively.
Just after starting, a cold engine in a mid-size car
only achieves a fuel economy of 6-8 mpg
(30-40 l/100 km). After about a half a mile, fuel
economy climbs to 12 mpg (20 l/100 km). After
about 2.5 mi
(4 km), the engine is at its proper
operating temperature and fuel economy has
reached a normal level. So you can see that you
should avoid short trips whenever possible .
The
outside temperature is also critical in this re­
gard. Your car consumes more fuel in the winter
than in the summer.
@ Note
Do not leave engine idling unattended after
starting. If warning lights should come on to indicate improper operation, they would go
unheeded. Extended idling also produces
heat, which could result in overheating or
other damage to the vehicle or other proper­
ty.
(D Note
- Have your vehicle maintained properly and
in accordance with the service recommenda­
tions in your Warranty & Maintenance book­
let. Lack of proper maintenance as well as
improper use of the vehicle will impair the
function of the emission control system and could lead to damage.
- Do not alter or remove any component of
the Emission Control System unless ap­
proved by the manufacturer.
- Do not alter or remove any device, such as
heat shields, switches, ignition wires,
valves, which are designed to protect your
vehicle's Emission Control System and other
important vehicle components .
(j) Tips
The consumption estimates as published by
ENVIRONMENTAL PROTECTION AGENCY
(EPA) and Transport Canada may not
59