2016 SKODA SUPERB Owner's Manual

›Remove the SIM card from the slot.
CAUTION
■
When inserting a SIM card of the incorrect size, there is a risk of damage to
Infotainment.■
Avoid using a an adapter for the SIM card as the SIM card may fall out while
driving due to vehicle vibrations - There is a risk of damage to the external
module.
■
If you let the SIM card protrude out from the slot, then it may fall out of the
slot while driving due to vehicle vibrations.
rSAP
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
The Bluetooth ®
profile RSAP (remote transmission of SIM data) also allows, in
contrast to Bluetooth ®
profile HFP the use of data services of the connected
telephone (if this profile is supported by the telephone and data services are
enabled in this telephone) » page 175.
The use of Bluetooth ®
profile RSAP requires the telephone function of the ex-
ternal module to be switched on.
Switching on and off
›
In the Telephone main menu, tap on the function surface,

→
Telephone In-terface “Business”
.
The pairing and connection process takes place in the same way to the Blue-
tooth ®
profile HFP » page 163.
If the rSAP profile supported by the telephone to be connected, then infotain-
ment tries to connect using this profile. Depending on the telephone, it is pos-
sible to block or release the connection using an rSAP profile in the telephone.
If a SIM card is inserted in the external module, it is not possible to connect the
telephone to Infotainment using the rSAP profile.
Note
If Infotainment is connected to an external device via Apple CarPlay or Android
Auto, then using the data connection via rSAP is not possible.167Telephone

Telephone functions
Enter telephone number and select
Fig. 204
Infotainment Columbus, Amundsen, Bolero: Numeric keypad /
editing the telephone number
Fig. 205
Infotainment Swing: Numeric keypad / editing the telephone
number
Enter a telephone number and dial
›
In the Telephone main menu, tap the function surface 
.
›
Enter the telephone number using the numeric keypad » Fig. 204 or
» Fig. 205 - 
.
›
Select the number entered by tapping on the function surface 
.
Function surfaces of the numerical keyboard Enter the last dialled number / dial the telephone number entered
Emergency call (only applies to some countries)
Breakdown call in case of breakdown
Information call (for information regarding the products and services of
the ŠKODA brand )
Choosing the mailbox number (For Infotainment Swing, the function is
not supported)
Delete the last number entered Display of function surfaces 
/ 
for the movement of the cursor in the
input line » Fig. 204or. » Fig. 205
Breakdown and info numbers
The breakdown and info numbers are free of charge. Charges are only made
for a telephone call in accordance with the fare conditions of your telephone
service provider.
The telephone numbers are already set at the factory. If you want to change
the numbers, then consult a ŠKODA service partner.
If no breakdown or Info calls can be made then a ŠKODA service partner should
be consulted.
Search for a contact using the numeric keypad
The numeric keypad can also be used for a contact search.
If e.g. the digits 32 are entered, then, in addition to the numeric keypad in the
area A
» Fig. 204 or. » Fig. 205 , contacts with the letter sequence DA, FA, EB
etc. are displayed.
Voicemail box (does not apply to the infotainment Swing)
If the voicemail number or was not imported or entered, then this can be en- tered or changed as follows.
▶ In the Telephone main menu, tap the function surface

→
User profile
→
Mailbox number:
.
▶ To select the voice mailbox number, tap the functional surface  or on the
numeric keypad, hold the functional surface 
 .
Note
The numerical keyboard can also be displayed during a telephone call.
 168Infotainment

List of telephone contactsFig. 206
Infotainment Columbus, Amundsen: List of telephone contacts /
contact details
Fig. 207
Infotainment Swing: List of telephone contacts / Contact details
›
In the Telephone main menu, tap on the function surface 
a list of tele-
phone contacts is displayed » Fig. 206and » Fig. 207 - 
.
If the main telephone is connected to Infotainment, the telephone contacts
from the telephone are used.
If there is a SIM card with activated telephone services in the external module
of Infotainment Columbus, telephone contacts on the SIM card are available. If
necessary, you can choose another external device to import the telephone
contacts by tapping the function surface
D
» Fig. 197 on page 162 .
Function surfaces
Contact search
Select a number in the telephone contact list - if a telephone contact con-
tains several telephone numbers, the system displays a menu containing
the telephone numbers for this contact after selecting the contact)
Display the contact details
Select the number in the contact details
Processing the telephone number of the contact before dialling
Infotainment Columbus, Amundsen, Bolero: The contact name can be read out by a Infotainment's generated voice
Opens the menu for sending a text message (SMS)
Infotainment Columbus, Amundsen: Start the route guidance to the contact address
Import list
After the first connection of the primary telephone and/or the SIM card (Co-
lumbus) with Infotainment, the import of the telephone contacts to the Info-
tainment memory starts. The import can take several minutes.
The Infotainment telephonebook has 4000 (Columbus) and 2000 (Amundsen,
Bolero, Swing) free storage locations for imported telephone contacts. Each
contact can contain up to 5 telephone numbers.
The number of imported contacts can be determined in the menu item 
→User profile
→
Import contacts:
or.
Contacts imp.
If an error occurs during the import, an appropriate message appears on the
screen.
Refresh list
When the telephone reconnects with Infotainment, the list is automatically
updated.
The update can be performed manually as follows. ▶ In the Telephone main menu, tap on the function surface,

→
User profile
→
Import contacts:
or.
Contacts imp.
.
ABC169Telephone

Management of preferred contacts (favourites)Fig. 208
Infotainment Columbus, Amund-
sen, Bolero: Preferred contacts
Fig. 209
Infotainment Swing: Preferred
contacts
Assigning favourites
›
In the main menu Telephone, tap on the desired function surface
A
» Fig. 208 and » Fig. 209 .
›
Select the desired contact (if necessary one of the contact numbers).
Connecting to a favourite
The functional surfaces of preferred contacts allow for an immediate dial of
the contact telephone number.
The favourites are available in two storage groups.
›
To Change storage group tap on the function surface
B
» Fig. 208 and
» Fig. 209 .
›
To choose tap on the assigned function surface
A
» Fig. 208 and » Fig. 209 .
Change allocated favourites
›
In the Telephone main menu, hold the desired function surface
A
» Fig. 208
and » Fig. 209 .
›
Select the desired contact (if necessary one of the contact numbers).
Delete a favourite›Press the  button, then tap on the function surface
 →
User profile
→
Manage favourites
.
›
Press the desired function surface of the preferred contact and confirm the
deletion.
You can delete all contacts by tapping on the function surface 

Delete all
/
All
and confirm the deletion process.
Call list
Fig. 210
Infotainment Columbus, Amundsen, Bolero: Call List / Contact
details
Fig. 211
Infotainment Swing: Call List / Contact details
›
In the Telephone main menu, tap on the function surface, 
a call list is dis-
played » Fig. 210 and » Fig. 211 - 
.
The call list can also be displayed during a telephone call. 
170Infotainment

Function surfacesSetting the display depending on the type of call▶All
- List of all calls
▶
Missed calls
/
Missed
. - List of missed calls
▶
Dialled numbers
/
Dialled.
- List of dialled numbers
▶
Received calls
/
Received.
- List of received calls
Dial a number from the call list
Display the contact details
Select the number in the contact details
Edit the telephone number before dialling (not applicable to Infotainment
Swing)
Symbols of the call type Answered call
Outgoing call
Missed call
Telephone call
Depending on the conversation context, the following functions can be execu- ted.
End dialling / reject incoming call / end callAccept incoming call / return to held call
Switch on/off ringer
Hold a call
Switch off/on microphone
Infotainment Columbus, Amundsen, Bolero: Connect conference call » page 171
Show caller details (if the contact is stored in the list) » page 169
Switch on/off hands-free (call to the telephone / switch to Infotainment) ▶ To switch off the hands-free system, in the Telephone main menu, tap on
the function surface 
→ Tap on
hands-free
during a call.
▶ To switch off the hands-free system, tap on the function surface  during a
call.
ABC  Conference
Applies to Infotainment Columbus, Amundsen, Bolero.Fig. 212
Conference call / Meeting details
The conference call is a shared call with between three and six participants.
Start a conference call/invite additional participants
›
During a call/conference, make the next call.
›
Or Take the new incoming call by tapping the functional surface
.
›
To
initiate conference call or. return to the conference call , tap on the func-
tion surface  surface.
Ongoing conference call
During an ongoing conference call, the call duration is displayed on the screen.
Depending on the context, the following functions can be selected.
Hold a conference call - Leave the conference temporarily (the confer-
ence continues in your absence)
Return to the held conference call
Switch off/on microphone
End conference call
Conference call details
Conference details ▶ During the ongoing conference call, tap on the function surface 
» Fig. 212 -
 .
A list of other conference participants is displayed. The following functions can
be selected depending on the type of telephone » Fig. 212 -
 . 

171Telephone

View details of participant
Talk to a participant separately from the conference call
End the call to a conference participant
Text messages (SMS)
Main menu
Applies to Infotainment Columbus, Amundsen, Bolero.
Fig. 213
Main menu text messages
›
In the Telephone main menu, tap on the function surface
 The main menu
for text messages appears » Fig. 213.
›
If necessary, select whether the SIM card inserted in the external module or
the telephone (Columbus) is to be used as the source of the text messages.
Depending on your type of connected telephone, you can perform the follow-
ing functions.
Opening a list of templates for quick answers
New text message
- Creating and sending the message
Inbox
- Open a list of received messages
Sent
- Open a list of sent messages
Outbox
- Open a list of messages not sent
Drafts
- Open a list of drafts (messages in progress)
Deleted
- Open a list of deleted messages
Send contact details
- send the contact details (business card) (Columbus)

ADisplay options to adjust the source of text messages (applies to
Infotainment Columbus)
If there is a SIM card with telephone services in the external module and there
is also a telephone with infotainment connected, then which source will be
used can be set after tapping the function surface 
From the main menu tel-
ephone , A menu of text messages should be displayed automatically.
▶ In the Telephone main menu, tap on the function surfaces 
→ Text messagesettings
→
Standard Account
.
▶ Select the desired menu item.
New text message
Fig. 214
Composing a text message / viewing a text message
Fig. 215
Contact list / recipient list
Creating and sending the message
›
In the main menu of the text messages, tap on the function surface 
» Fig. 213 on page 172 .
›
Write a message and tap on the function surface 
» Fig. 214 -
tap on, a
view of the text message is displayed » Fig. 214-
. 
172Infotainment

›Tap on the function surface
 .›Enter the recipient of the message from the displayed list or telephone num-
ber by tapping the functional surface 
» Fig. 215 - 
.›
Tap on the function surface 
» Fig. 215 - 
tap on, the message is sent.
While composing the message, the functional surface is 
the number of en-
tered characters displayed » Fig. 214 - 
.
The maximum number of characters entered in a message is 440. If a message
is longer than 70 characters, then it is split into multiple messages.
Viewing the text message
After opening the view message function » Fig. 214 - 
the following functions
can be executed.
The text can be read out by Infotainment's generated voice
The text can be stored as a draft
Open a list of templates with the open to replace the recorded text with
the selected template
Open the contact list
The message can be edited, as long as the text range is within the entered
view.
Contact list
After the list has been opened the following functions can be executed
» Fig. 215 -
 .
Insert a contact in the recipient list
Contact search
Enter the telephone number
Return to view the message
After selecting the contact number or entering the telephone number, the re-
cipient list will be displayed in the screen » Fig. 215 -
 .
Recipient list
The following functions can be performed by tapping one of the functional sur-
faces » Fig. 215 -
 .
To display the contact list with the option to add/remove additional mes-
sage recipients / (to return to the recipient list » Fig. 215 -
 tap on the
function surface  )
Removal of the contact from the recipient list
ASending the message
Return to view the message
Received text message
When you receive a new message, the number of new messages received is
displayed next to the function surface 
and at the same time the icon in the
status bar is 
displayed.
›
To Open the list of received messages tap on the button, then the func-
tion surface 
→ 
surface.
›
Select a message.
The message content and the following menu is displayed.
The text can be read out by Infotainment's generated voice
Display a menu with additional options
▶
Reply with template
- Reply using a template
▶
Delete current text message
- Distance of displayed text message (applies to
Infotainment Columbus, when the SIM card is inserted in the external
module or the telephone is connected via the Bluetooth ®
-profile rSAP)
▶
Display numbers
- Recognition of telephone numbers in the message in-
cluding the contact number (recognised numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forwarding a message with the option to edit the message before sending
Reply to the sender via a message
173Telephone

Hotspot (WLAN) and data connection
Hotspot (WLAN)
Introduction to the subject
Applies to Infotainment Columbus, Amundsen.
WLAN can be used to connect to the Internet, to playback audio files in the menu media (if the connected external device allows this) or for operating In-
fotainment using an application in the external device (e.g. ŠKODA Media
Command).
The requirement for the WLAN function is the ignition is switched on. After
switching on the ignition, the last-used WLAN connection appears.
It is possible to connect up to 8 external devices on the Infotainment hotspot and at the same time to connect Infotainment to the hotspot of other external
devices.
If there is a SIM card with activated data service in the external module of Info-
tainment Columbus or there is a connection to the telephone via Blue-
tooth ®
profile RSAP, the external device cannot be connected to the hotspot.
Connect an external device to the hotspot (WLAN) of the device
Turn Infotainment hotspot on / off
›
Press the  button, then tap on the function surface
 Tap on
→
WLAN
→
Mobile hotspot
→
Mobile hotspot
.
Set Infotainment hotspot ▶ Press the 
button, then tap on the function surface
 Tap on
→
WLAN
→
Mobile hotspot
→
Hotspot (WLAN) settings
.
▶ Set the required menu items from the following menu.
■
Security level:
- Setting the connection security
■
Network key
- Entering the access password
■
SSID: ...
- Name of the Infotainment hotspot
■
Do not send network name (SSID)
-Turn Infotainment hotspot visibility on/off
▶ Tap the functional surface
Store
to save the parameters of the Infotainment
hotspot.
Connect ▶ Enable the Wi-Fi in the external device and search for any available hotspots.
▶ Select the Infotainment hotspot (if necessary, enter the required password).
▶ Confirm the connection.
Establish secure connection using WPS (Applies to Infotainment Amundsen) ▶ Turn on WLAN in Infotainment.
▶ Press the 
button, then tap on the function surface

→
WLAN
→
WLAN
→
WPS Quick Connect (WPS button)
.
▶ Turn on the option to connect to the Infotainment hotspot using WPS.
Note
If the external device if connected to the Infotainment hotspot (WLAN) , then
the data connection of the external device cannot be used.
Connect Infotainment to the hotspot (WLAN) of the external
device
Fig. 216
List of available wireless networks: Infotainment Columbus / In-
fotainment Amundsen
›
To Turn on / off the Infotainment WLAN press the button , then tap on
the function surface → 
→
WLAN
→
WLAN
→
WLAN
.
Show available hotspots
▶ Press the 
button, then tap on the function surface

→
WLAN
→
WLAN
1)
→ WLAN.
With WLAN activated, a list of available or previously connected hotspots with
the following information and functional areas is displayed » Fig. 216. 
1)
As long as infotainment is connected to the hotspot of the external device, the hotspot name is dis-
played in the functional surface.
174Infotainment