2016 NISSAN NOTE washer pump

WW-60
< REMOVAL AND INSTALLATION >
FRONT WASHER NOZZLE AND TUBE
FRONT WASHER NOZZLE AND TUBE
Exploded ViewINFOID:0000000012433238
WASHER NOZZLE
WASHER NOZZLE : Removal and InstallationINFOID:0000000012433239
REMOVAL
1. Remove cowl top cover. Refer to EXT-37, "Removal and Installation".
2. Disconnect front washer tube fr om front washer nozzle (1).
3. Place cowl top cover (2) up side down and release front washer nozzle pawl (A) using a suitable tool to remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, adjust the nozzle spray pattern. Refer to WW-61, "
WASHER NOZZLE : Adjustment".
1. Front washer nozzle (RH) 2. Front washer tube3. Front washer motor
4. Washer tank 5. Front washer nozzle (LH) A. To rear washer
B. Washer pump seal Clip
ALLIA1306ZZ
AWLIA2161ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

FRONT WASHER NOZZLE AND TUBEWW-61
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
K
M A
B
WW
N
O P
WASHER NOZZLE : AdjustmentINFOID:0000000012433240
If washer nozzle (1) spray pattern is not within specification, adjust
using a suitable tool (A).
WASHER TUBE
WASHER TUBE : Removal and InstallationINFOID:0000000012433241
REMOVAL
1. Remove fender protector (RH). Refer to EXT-38, "Removal and Installation".
2. Remove front washer tube from washer pump.
3. Remove cowl top cover. Refer to EXT-37, "
Removal and Installation".
4. Release the clips that retain the front washer tube to the vehicle body using a suitable tool and remove.
1. Windshield glass 2. Black printed area line3. Front washer nozzle (LH/RH)
A. Center line B. 509.7 mm (20.07 in)C. 215.7 mm (8.49 in)
D. 614.5 mm (24.19 in) E. 329.1 mm (12.96 in)F. 41.0 mm (1.61 in)
G. 379.6 mm (14.94 in) H. 161.1 mm (6.34 in)J. 58.6 mm (2.31 in)
K. 58.0 mm (2.28 in) M. 142.0 mm (5.59 in)N. 365.9 mm (14.41 in)
O. 54.7 mm (2.15 in) P. 492.5 mm (19.39 in)Q. 652.2 mm (25.68 in)
R. 174.3 mm (6.86 in) S. 520.7 mm (20.50 in)
ALLIA1307ZZ
JMLIA1327ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com

WW-74
< REMOVAL AND INSTALLATION >
REAR WASHER NOZZLE AND TUBE
If washer nozzle (1) spray pattern is not within specification, adjust
using a suitable tool (A).
WASHER TUBE
WASHER TUBE : Removal and InstallationINFOID:0000000012433261
REMOVAL
1. Remove front under cover. Refer to EXT-39, "FRONT UNDER COVER : Removal and Installation".
2. Remove fender protector (RH). Refer to EXT-38, "
Removal and Installation".
3. Disconnect the rear washer tube from the washer pump.
4. Remove dash side finisher (RH). Refer to INT-24, "
DASH SIDE FINISHER : Removal and Installation".
5. Remove front and rear kicking plate (RH). Refer to INT-22, "
KICKING PLATE : Removal and Installation".
6. Remove center pillar lower finisher (RH). Refer to INT-25, "
CENTER PILLAR LOWER FINISHER :
Removal and Installation".
7. Remove rear seat back (RH). Refer to SE-26, "
SEATBACK : Removal and Installation".
8. Remove luggage side upper finisher (RH). Refer to INT-35, "
LUGGAGE SIDE UPPER FINISHER :
Removal and Installation".
1. Rear washer nozzle2. Back door window glass3. Black printed area line
A. 30.8 mm (1.21 in) B. 23.6 mm (0.93 in)C. 21.1 mm (0.83 in)
ALLIA1314ZZ
JMLIA1327ZZ
Revision: August 2015 2016 Versa Note

cardiagn.com