2016 LEXUS NX200T Owners Manual

6179-2. Customization
9
Vehicle specifications
NX200t_OM_USA_OM78081U
■Wireless remote control (P. 1 1 4 )
■Automatic light control system ( P. 2 1 0 )
■Lights (P. 2 1 0 )
FunctionDefault
settingCustomized setting
Wireless remote control OnOff – – O –
Unlocking operation Driver’s door
unlocked in first
step, all doors
unlocked in
second stepAll doors
unlocked in first
step
O–O–
Pa n i c f u n c t i o n On
Off – – O –
The function that validates the switch of the wireless
remote control when locking
the door ( P. 1 2 0 ) When locking
the door
When unlock-
ing the door
––O–
1234
FunctionDefault
settingCustomized setting
Light sensor sensitivityStandard-2 to 2O–O–
Adjust the time elapsed
before the headlights auto-
matically turn off 30 seconds
Off
O–O–
60 seconds
90 seconds
1234
FunctionDefault settingCustomized setting
Daytime Running Lights
(Daytime running lights can
be disabled)OnOffO–O–
1234

6189-2. Customization
NX200t_OM_USA_OM78081U
■Illumination ( P. 4 3 3 )
FunctionDefault
settingCustomized setting
Time elapsed before the inte-
rior lights turn off 15 secondsOff
O–O–
7. 5 s e c o n d s
30 seconds
Time elapsed before the exte-
rior lights turn off15 seconds
Off
O–O–7. 5 s e c o n d s
30 seconds
Operation after the engine
switch is turned offOnOff––O–
Operation when the doors
are unlockedOnOff––O–
Operation when you
approach the vehicle with the
electronic key on your person
OnOff––O–
Footwell lightingOnOff––O–
Fading out of the outer foot
lights when they turn offLongShort––O–
1234

6199-2. Customization
9
Vehicle specifications
NX200t_OM_USA_OM78081U
■Multi-information display (P. 8 7 , 9 1 )
*1: The default setting varies according to countries.
*2: Some status screens cannot be registered (indicated on the multi-information display)
*3: 2 of the following items: current fuel consumption, average fuel economy (after reset),
average fuel economy (after refuel), average fuel economy (after start), average vehi-
cle speed (after reset), average vehicle speed (after start), distance (driving range),
distance (after start), elapsed time (after reset), elapsed time (after start), blank
*4: Intersection guidance, Incoming calls, Adjust brightness
FunctionDefault settingCustomized setting
Eco Driving Indicator Light On Off – O – –
Language*1EnglishFrench–O––Spanish
Units*1miles (MPG US)
miles
(MPG Imperial)
–O––km (L/100 km)
km (km/L)
switch settingsDrive
information 1Desired status screen
*2–O––
Drive information screen dis-
played on the first screen of

(Drive information 1)Current fuel
consumption
*3–O––Average fuel
consumption (after reset)
Drive information screen dis-
played on the second screen
of
(Drive information 2)Distance (range)
*3–O––Average speed
(after reset)
Po p - u p d i s p l a y*4OnOff–O––
Accent colorColor 1Color 2OO––
1234

6209-2. Customization
NX200t_OM_USA_OM78081U
■Automatic air conditioning system ( P. 4 2 0 )
■Powe r w i n d ow s ( P. 1 5 8 )
■Moon roof*1 ( P. 161)
*1:If equipped
*2: This function cannot be customized unless power window operations, using the wire-
less remote control or mechanical key, is enabled.
FunctionDefault settingCustomized setting
Switching between outside air
and recirculated air mode
linked to “AUTO” switch
operation
OnOffO–O–
A/C Auto switch operationOnOffO–O–
1234
FunctionDefault settingCustomized setting
Mechanical key linked opera-
tionOffOn––O–
Wireless remote control
linked open operationOffOn––O–
1234
FunctionDefault
settingCustomized setting
Mechanical key linked opera-
tion
*2OffOn––O–
Wireless remote control
linked open or Tilt up opera-
tions
*2OffOn––O–
1234

6219-2. Customization
9
Vehicle specifications
NX200t_OM_USA_OM78081U
■Intuitive parking assist* ( P. 2 7 0 )
*:If equipped
■Driving position memory* ( P. 1 4 5 )
*:If equipped
■Outside rear view mirrors ( P. 1 5 5 )
FunctionDefault
settingCustomized setting
Detection distance of the
front center sensorLongShortO–O–
Detection distance of the rear
center sensorLongShortO–O–
Display setting (When intui-
tive parking assist is operat-
ing)
OnOffO–O–
Buzzer volume31 to 5O–O–
1234
FunctionDefault settingCustomized setting
Driver’s seat movement when
exiting the vehicleStandardOffO–O–Pa r t i a l
Selection the door linking
driving position memory with
door unlock operation
Driver’s doorAll doors––O–
1234
FunctionDefault settingCustomized setting
Linked mirror function when
reversingOnOff––O–
1234

6229-2. Customization
NX200t_OM_USA_OM78081U
■LDA (Lane Departure Alert with steering control)* (  P. 2 6 1 )
*:If equipped
■Power back door*1 ( P. 1 2 0 )
*1:If equipped
*2: Configured by operating the switch of the lower back door. ( P. 1 2 3 )
*3: While carrying the electronic key on your person, press the back door opener switch.
FunctionDefault
settingCustomized setting
Steerage assistOnOff–O––
Sensitivity adjustment for the
lane deviation alert buzzerStandardHigh–O––
1234
FunctionDefault settingCustomized setting
Set at the desired Position
(height)
*2
Back Door Automatic
Open and Stop Position
Initial settings
Po s i t i o nStop at the
desired position
(height)
–––O
5 step configuration
Back Door Automatic
Open and Stop Position
51 to 5O–O–
Back door opener switch
operationsWhen the back
door is
locked
*3
When the back
door is
unlocked
––O–
Power back door operationsOnOff–O––
1234

6239-2. Customization
9
Vehicle specifications
NX200t_OM_USA_OM78081U
■Vehicle customization
●When the speed linked door locking function and shift position linked door locking
function are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all th e doors will be locked.
• If the vehicle is started with all the door s locked, the speed linked door locking func-
tion would not operate.
• If the vehicle is started with any door un locked, the speed linked door locking func-
tion will operate.
●When the smart access system with push-but ton start is off, smart door unlocking can-
not be customized.
●When the doors remain closed after unloc king the doors and the automatic door lock
function is activated, the signals will be generated in accordance with the Operation
signal (buzzer) and the Operation si gnal (emergency flashers) settings.
■In the following situations, customize mo de in which the settings can be changed
through the multi-in formation display will automatically be turned off.
●A warning message appears after the cu stomize mode screen is displayed.
●The engine switch is turned off.
●The vehicle begins to move while the customize mode screen is displayed.
WA R N I N G
■Cautions during customization
As the engine needs to be running during customization, ensure that the vehicle is
parked in a place with adequate ventilation. In a closed area such as a garage, exhaust
gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This
may lead to death or a serious health hazard.
NOTICE
■During customization
To prevent battery discharge, ensure that the engine is running while customizing fea-
tures.

6249-3. Initialization
NX200t_OM_USA_OM78081U
Items to initialize
*:If equipped
The following items must be initialized for normal system operation after such
cases as the battery being reconnecte d, or maintenance being performed on
the vehicle.
ItemWhen to initializeReference
Message indicating mainte-
nance is required (U.S.A. only)• After the maintenance is per- formedP. 4 8 0
Tire pressure warning system
• When rotating the tires on vehi-
cles with differing front and rear
tire inflation pressures
• When changing the tire inflation
pressure by changing traveling
speed or load weight, etc.
• When changing the tire size
P. 5 0 4
Oil maintenance• After the maintenance is per- formedP. 4 9 4
Power back door*
• After reconnecting or changing
the battery
• After changing a fuse
P. 1 2 5
Po w e r w i n d o w• When functioning abnormally normallyP. 1 5 9
Moon roof*P. 1 6 2