2016 Lexus GS300h Navigation manual

89
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
No.FunctionPage
Select to search for a destination.104
Select to suspend or resume guidance.
Select to change routes and/or destinations and to view route over-
view.127
Select to enable changes to “Home”, “Memory points”, “Quick access”,
“Area to avoid”, etc.131
Select to set the desired map configuration.92
Select to set the Points of Interest to be displayed on the screen.96
Select to start/stop recording the route trace.97
Select to register the current position or the cursor position as a mem-
ory point. Can be changed to a desired name, icon, etc.131

90
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
2. MAP SCREEN OPERATION
1Press the “MAP” button on the Remote
Touch.
2Check that the current position map is
displayed.
z Select if the navigation menu
screen is displayed.
z Selecting on the side display will
change the map screen to full screen dis-
play.
CURRENT POSITION DISPLAY
zTo correct the current position manually:
→ P.1 5 0
INFORMATION
●
While driving, the current position mark
is fixed on the screen and the map moves.
●The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
●After the 12-volt battery disconnection,
or on a new vehicle, the current position
may not be correct. As soon as the sys-
tem receives signals from the GPS, the
correct current position is displayed.

91
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
1Select or to change the
scale of the map screen.
zThe scale indicator bar appears at the bot-
tom of the screen.
z Select and hold or to continue
changing the scale of the map screen.
z The scale of the map screen can also be
changed by selecting the scale bar directly.
: Select to display the entire route, if
the destination has been set.
1Select to display the city map.
z To return to the normal map display, select
.
MAP SCALE
INFORMATION
●
Press the “” button on the Remote
Touch to zoom in on the map screen and
the “” button to zoom out.
●When the map scale is at the minimum
range, a one way street is displayed by
.
CITY MAP
The city map is available for some major
cities. When a map scale of 50 yd. (50
m) is selected, the map display will
change to the city map in either 2D or
3D.

92
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
: North-up symbol
Regardless of the direction of vehicle travel,
north is always up.
: Heading-up symbol (When in 2D map
mode.)
The direction of vehicle travel is always up.
A red arrow indicates north.
: Heading-up symbol (When in 3D map
mode.)
The direction of vehicle travel is always up.
A red arrow indicates north.
1Select “Menu” on the map screen.
( → P.86)
2Select “Map Configuration” .
3Select the desired item.
ORIENTATION OF THE MAP
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by se-
lecting the orientation symbol displayed
at the top left of the screen.
SWITCHING MAP
CONFIGURATIONS

93
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
zDepending on the conditions, certain con-
figuration screen buttons cannot be
selected.
■ COMPASSNo.FunctionPage
Select to display the single
map screen.
Select to display the com-
pass mode screen.93
Select to display the turn list
screen.125
Select to display the arrow
screen.125
Select to display the motor-
way information screen.123
Select to display the inter-
section guidance screen or
the guidance screen on the
motorway.
124
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
●
The destination mark is displayed in the
direction of the dest ination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
●When the vehicle travels out of the cover-
age area, the guidance screen changes to
the compass mode screen.

94
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
zTo scroll over the map, place the cursor
mark in the desired position and then press
and hold the Remote Touch knob. The map
will continue scrolling in that direction until
the knob is released.
z Press the “MAP” button on the Remote
Touch to return to the current position.SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the centre of the screen for
looking at a point on the map screen that
is different from the current position.
No.Information/FunctionPage
Cursor mark
Select to register the cursor
location as area to avoid.95
Select to register as a mem-
ory point. To change the
icon, name, etc.: →P.137
Select to set as a destina-
tion.115
Distance from the current
position to the cursor mark

95
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
1Scroll the map to the desired point and
select “A v o i d ” .
2Select either or to
change the size of the area to be avoid-
ed and select “OK”.
1Select one of the 8 directional arrows to
move the cursor to the desired point.
zThe cursor can also be moved by briefly
selecting a desired point on the map.
REGISTERING THE CURSOR
LOCATION AS AN AREA TO
AVOID
A specific location on the map screen
can be set as an area to avoid using the
scroll function.
INFORMATION
●
If a destination is entered in the area to
avoid or the route calculation cannot be
made without running through the area to
avoid, a route passing through the area to
be avoided may be shown.
●Up to 10 locations can be registered as
areas to avoid.
ADJUSTING LOCATION IN
SMALL INCREMENTS
The exact target location can be adjust-
ed in small increments by selecting one
of the 8 directional arrows.

96
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
3. MAP SCREEN INFORMATION
1Select “Menu” on the map screen.
( → P.86)
2Select “Show POI” .
3Select the desired POI categories and
select “OK”.
■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POI’s” .
2Select the desired POI categories and
select “OK”.
“List all categories” : Select to display all
POI categories. To add more POI catego-
ries, select “More”.
DISPLAYING POI ICONS
POI icons such as petrol stations and
restaurants can be displayed on the map
screen. Their location can also be set as
a destination and used for route guid-
ance.
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen
Select to turn the POI icons
on the map screen off.
Displays up to 6 POI icons
as favourite POI categories149
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
96
Select to search for the
nearest POIs. Then select
one of the categories.
97