2016 Lexus GS300h Navigation manual

121
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
XWhen arrival time is selected
X When travel time is selected
No.Information/Function
Shows when more than 5 destina-
tions are set. Select to display desti-
nation information on another page.
Displays the distance to the destina-
tion
Displays the estimated arrival time
Displays the estimated travel time
INFORMATION
●
When the vehicle is on the guidance
route, the distance measured along the
route is displayed. Travel time and arrival
time are calculated based on the set vehi-
cle speed information. ( →P.1 4 9 ) H o w -
ever, when the vehicle is not on the
guidance route, the distance displayed is
the linear distance between the current
position and the destination. The arrow
indicates the direction of the destination.

122
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
■TRAFFIC INFORMATION
1Select “Traffic bar” .
2Check that the traffic information is dis-
played.
zWhen multiple destinations are set, traffic
information icons are displayed up to the
nearest destination area.
z When the distance to the destination is 65
miles (100 km) or more, traffic information
icons are displayed up to 65 miles (100
km) away from the current position.
When traffic information is received, the
traffic information bar is displayed.
The colour of the arrow indicates specif-
ic road conditions. Red indicates a
closed road, accident, etc. Orange indi-
cates a traffic jam. Blue indicates normal
traffic flow. (Note that roads that are not
covered by traffic information are also
shown in blue.)
No.Information
Icon that shows road hazard points.
Arrow that shows traffic congestion.
Displays estimated travel time delay
caused by road repairs, an accident,
etc.

123
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
DURING MOTORWAY
DRIVING
During motorway driving, this screen
displays the distance and time to the
junction/exit, or POIs in the vicinity of
the motorway exit.
No./IconInformation/Function
Displays the exit number, junction
name or POIs that are close to a mo-
torway exit.
Distance and time from the current
position to the road traffic facilities.
Select to display the nearest road
traffic facilities from the current posi-
tion.
Select to display the distance to the
next and subsequent parking areas
and parking area POIs.
Select to scroll to farther road traffic
facilities.
Select to scroll to closer road traffic
facilities.
INFORMATION
●
When the map screen is set to full screen
display, the motorway information screen
will be displayed on the side display.

124
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
WHEN APPROACHING
MOTORWAY EXIT OR
JUNCTION
When the vehicle approaches an exit or
junction, the motorway guidance screen
will be displayed.
No.Information/Function
Next exit or junction name
Select to hide the motorway guid-
ance screen. To return to the motor-
way guidance screen, press the
“MAP” button on the Remote
Touch.
Distance from the current position to
the exit or junction
Remaining distance bar to the guid-
ance point
INFORMATION
●
When the map screen is set to full screen
display, the map screen and the motor-
way guidance screen will be displayed.
●If “Automatic zoom” is set to on, this
screen is not displayed. ( →P.1 4 7 )
WHEN APPROACHING
INTERSECTION
When the vehicle approaches an inter-
section, the intersection guidance
screen will be displayed.
No.Information/Function
Next street name
Lane guidance
Select to hide the intersection guid-
ance screen. To return to the inter-
section guidance screen, press the
“MAP” button on the Remote
Touch.
Distance to the intersection
Remaining distance bar to the guid-
ance point
INFORMATION
●
When the map screen is set to full screen
display, the intersection guidance screen
will be displayed on the side display.
●If “Automatic zoom” is set to on, this
screen is not displayed. ( →P.1 4 7 )

125
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
1Select “Turn list” on the “Map configu-
ration” screen. ( →P.92)
2Check that the turn list screen is dis-
played.
1Select “A r r o w ” on the “Map configura-
tion” screen. ( →P.92)
2Check that the arrow screen is dis-
played.
TURN LIST SCREEN
No.Information/Function
Next street or destination name
Turn direction
Distance between turns
INFORMATION
●
When the map screen is set to full screen
display, the turn list screen will be dis-
played on the side display.
ARROW SCREEN
On this screen, information about the
next turn on the guidance route can be
viewed.
No.Information/Function
Exit number or street name
Turn direction
Distance to the next turn
INFORMATION
●
When the map screen is set to full screen
display, the arrow screen will be dis-
played on the side display.

126
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
2. TYPICAL VOICE GUIDANCE PROMPTS
As the vehicle approaches an intersec-
tion, or point, where maneuvering the
vehicle is necessary, the system’s voice
guidance will provide various messages.
WA R N I N G
●Be sure to obey the traffic regulations and
keep the road condition in mind espe-
cially when you are driving on IPD roads
(roads that are not completely digitized in
our database). The route guidance may
not have the updated information such as
the direction of a one way street.
INFORMATION
●
To hear a voice guidance command again
if it cannot be heard, press the “MAP”
button on the Remote Touch.
●To adjust the voice guidance volume:
→ P. 7 7
●Voice guidance may be made early or
late.
●If the system cannot determine the cur-
rent position correctly, you may not hear
voice guidance or may not see the mag-
nified intersection on the screen.

127
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
3. EDITING ROUTE
1Select “Menu” on the map screen.
( → P.86)
2Select “Route” .
3Select the items to be set.
4Check that the entire route map is dis-
played. ( →P.117)
1Display the “Route” screen. ( →P.127)
2Select “A d d ”.
3Search for an additional destination in
the same way as a destination search.
(→ P.104)
4Select “Add destination here” to insert
the new destination into the route.
1Display the “Route” screen. ( →P.127)
2Select “Reorder” .
3Select the desired destination and se-
lect “Move up” or “Move down” to
change the arrival order. Then select
“OK” .
No.FunctionPage
Select to set search condi-
tions.128
Select to set detours.128
Select to set road prefer-
ences.129
Select to add destinations.127
Select to delete destina-
tions.128
Select to reorder destina-
tions.127
Select to display route
overview.130
ADDING DESTINATIONS
REORDERING
DESTINATIONS
When more than 1 destination has been
set, the arrival order of the destinations
can be changed.

128
3. ROUTE GUIDANCE
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
1Display the “Route” screen. (→P.127)
2Select “Delete” .
3Select “Yes” when the confirmation
screen appears.
z When more than 1 destination is set, a list
will be displayed on the screen.
“Delete all” : Select to delete all destinations
on the list.
z If more than 1 destination has been set, the
system will recalculate the route(s) to the
set destination(s) as necessary.
1Display the “Route” screen. ( →P.127)
2Select “Search condition” .
3Select the desired type and select “OK”.
1Display the “Route” screen. ( →P.127)
2Select “Detour” .
3Select the desired detour distance.
DELETING DESTINATIONS
SETTING SEARCH
CONDITION
Road conditions of the route to the des-
tination can be set.
DETOUR SETTING
During the route guidance, the route
can be changed to detour around a sec-
tion of the route where a delay is caused
by road repairs, an accident, etc.
No.Function
Select to detour within 1 mile of the
current position.
Select to detour within 3 miles of the
current position.
Select to detour within 5 miles of the
current position.
Select to detour on the entire route.
Select to make the system search for
the route based on the traffic con-
gestion information received from
traffic information. ( →P.100)