2016 Citroen C4 PICASSO instrument panel

152
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Memorising the speed setting
This memorisation is in addition to the display
of Speed limit recognition .
The driver can choose to adapt the speed
setting
  to   the   speed   limit   suggested,   by  
p

ressing   the   memorisation   button   at   the   speed  
l

imiter controls, with the standard cruise
control, the dynamic cruise control or the
dynamic
  cruise   control   with   Stop   function.
This
  speed   setting   then   replaces   the   previous  
s

peed  
s
etting  
f
or  
t
he  
s
peed  
l
imiter  
a
nd/or  
c
ruise  
c

ontrol. For more information on the Speed
limiter, Cruise control , Dynamic
cruise control or Dynamic cruise
control with Stop function , refer to
the
  corresponding   sections.
Steering mounted controls
1. Select  speed   limiter/cruise   control   mode.
2. M emorise   a   speed   setting.
Operating limits
The legislation on speed limits is specific to each   country.
The
  system   does   not   take   account   of   reduced  
s

peed   limits   in   the   following   cases:
-

p
oor weather (rain, snow),
-
a

tmospheric pollution,
-

t
railer, caravan,
-
 
d
riving   with   a   space-saver   type   spare  
w

heel or snow chains fitted,
-
 
p
uncture   repair   using   the   temporary  
r

epair kit,
-
 y

oung
 d
rivers,
-
 ...
T

he   system   may   be   disrupted   or   not   work   at   all  
i

n   the   following   situations:
-
 
p
oor   visibility   (inadequate   street   lighting,  
f

alling   snow,   rain,   fog),
-

w
indscreen area ahead of the camera dirty,
misty,
  frosty,   covered   with   snow,   damaged  
o

r   masked   by   a   sticker,
-

f
ault with the camera,
-
 
o
bsolete   or   incorrect   mapping,
-
 
h
idden   road   signs   (other   vehicles,  
v

egetation,
 s
now),
-
 
s
peed   limit   signs   that   do   not   conform   to   the  
s

tandard,   are   damaged   or   distorted.
Display in the instrument panel
3. Speed  limiter   indication.
4. M emorise   the   speed.
5.
 C

urrent   speed   setting.
Driving

154
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Steering mounted controls
6. Speed  limiter   on   /   pause   indication.
7. S peed   limiter   mode   selection   indication.
8.
 S

peed   limiter   setting.
Speed limiter - "LIMIT"
System which prevents the vehicle from exceeding the speed programmed by the driver.
The speed limiter cannot, in any
circumstances, replace the need to
observe speed limits, nor can it replace the
need
  for   vigilance   on   the   part   of   the   driver.
Once the programmed speed limit is reached, additional pressure on the accelerator pedal
has
  no   effect.
1.
 S

elect   speed   limiter   mode.
2.
 L

ower   programmed   speed.
3.
 R

aise   programmed   speed.
4.
 S

peed   limiter   on   /   pause.
5.
D

isplay the list of memorised speeds or,
 D

isplay   the   list   of   memorised   speeds.Displays in the instrument panel
Switching on the speed limiter requires
a   programmed   speed   of   at   least   20   mph  
(

30 km/h).
The speed limiter is paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease the accelerator pedal until the vehicle
returns
  to   the   programmed   speed   limit.
The
  programmed   speed   remains   in   the
 m

emory   when   the   ignition   is   switched   off.For more information on Memorising speeds ,
refer
  to   the   corresponding   section.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
Driving

155
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Switching on / Pause
F Turn thumbwheel 1 to the "LIMIT" position:  t
he speed limiter mode is selected but is
not
  switched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4, if the speed displayed
is suitable (by default, the last speed
programmed).
F

Y
ou can temporarily stop the speed limiter
by
  pressing   button   4   again:   the   display  
c

onfirms   that   it   has   been   stopped   (Pause).You do not have to switch the speed limiter on
in
  order   to   set   the   speed.
Once the function is selected, you can modify
the
  speed   setting   by:
-
 
u
sing   buttons   2 and 3,
  raising   or   lowering  
t

he   speed   displayed   :
F

b
y successive short presses, to modify
by
  +   or   -   1   mph   (km/h),
F

b
y a maintained press, to modify in steps
of
  +   or   -   5   mph   (km/h).
Adjusting the speed limiter
setting
- pressing  button   5:
F  t he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
p
ress   the   button   corresponding   to   the  
l

imit   speed   chosen.
The
  value   is   displayed   in   the   instrument   panel.
The selection screen closes after a few
moments.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
4
Driving

157
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. C ruise   control   mode   selection   indication.
8.
 Spe

ed
 s
etting.
Cruise control - "CRUISE"
System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control system cannot, in any circumstances, replace the need to observe speed limits, nor can it replace the need for vigilance on the part of the driver.
Y ou   are   advised   to   keep   your   feet   near   the   pedals   at   all   times.
Switching on the cruise control requires a
minimum   vehicle   speed   of   25   mph   (40   km/h).
As
  well   as   engagement   of:
-
 
f
ourth   gear   or   higher   on   a   manual   gearbox,
-
 
s
econd   gear   or   higher   in   manual   mode   on  
a

n   automatic   gearbox,
-
position D
  on   an   automatic   gearbox.
The
  system   remains   active   after   changing   gear  
o

n   vehicles   with   a   manual   gearbox   and  
Stop
  &   Start.
The cruise control is paused
 

by   pressing  
b

utton 4   or   the   brake   pedal   or   on   triggering   of  
t

he   ESC   system   for   safety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease the accelerator pedal until the
programmed
  cruise   speed   is   reached   again.1.
 S

elect   cruise   control   mode.
2.
S

et the current speed of the vehicle
as
  the   programmed   speed   /   Lower   the  
pro

grammed
 s
peed.
3.
S

et the current speed of the vehicle
as
  the   programmed   speed   /   Raise   the  
pro

grammed
 s
peed.
4.
 P

ause   /   resume   cruise   control.
5.
D

isplay the list of memorised speeds or,
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.Displays in the instrument panel
Switching off the ignition cancels any programmed   speed   value. For more information on Memorising speeds
,
refer   to   the   corresponding   section.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s
ection.
4
Driving

158
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed   speed   flashes.
The
  display   becomes   steady   again   once   the  
v

ehicle   returns   to   the   cruise   speed   setting.
Switching off
F Turn thumbwheel 1 to the "0" p osition. T
he display of information related to the
cruise
  control   disappears.
Switching on
Once the cruise control is switched on, you
can  modify   the   cruising   speed   in   one   of   the  
f

ollowing
 w
ays:
-
 
u
sing   buttons   2 or 3:
F

b
y successive short presses, to modify
the
  speed   by   +   or   -   1   mph   (km/h),
F
 
b
y   a   long   press,   to   modify   the   speed   in  
s

teps   of   +   or   -   5   mph   (km/h),
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speeds   are   displayed  
i

n the touch screen tablet,
F
 
c
hoose   a   value:   it   is   displayed   in   the  
in

strument
 pan
el.
The selection screen closes after a few
moments.
The
  modification   is   then   accepted.
F

T

urn thumbwheel 1 to the "CRUISE"

position:
 
the
 
cruise
 
control
 
mode
 
is
 s
elected
 
but
 
is
 
paused.
F
P
ress button 2 or 3 :
 
your
 
vehicle's
 
current
 
s

peed
 
becomes
 
the
 
cruise
 
speed.
The
 
cruise
 
control
 
is
 
activated
 
(ON).
Modification of the cruise speed
(speed setting)
- by   pressing   button   5, if your vehicle has
speed   limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
Pause
You can pause the cruise control at any time
by  pressing   button   4:
  the   screen   confirms   the  
pa

use.
Driving

161
C4-Picasso-II_en_Chap04_conduite_ed01-2016
The dynamic cruise control is switched on
manually:   it   requires   that   the   speed   of   the  
v

ehicle be between 25 and 90 mph (40 and
150 km/h),
  as   well   as   the   engagement   of:
-
 
f
ourth   gear   or   higher   with   a   manual  
g

earbox,
-
 
s
econd   gear   or   higher   with   an   automatic  
g

earbox   in   manual   mode,
-
position D
  with   an   automatic   gearbox.
The
  system   remains   active   after   changing   gear  
o

n   vehicles   with   a   manual   gearbox   and  
Stop
  &   Start.
General points
The dynamic cruise control can be paused
manually o r a utomatically:
-
 
b
y   pressing   button   4,
-
 
b
y   pressing   the   brake   pedal,
-

i
n the event of operation of the ESC, for
safety reasons,
-

i
n the event of operation of the electric
parking
  brake   control   lever,
-

w
hen an inter-vehicle time threshold is
reached
  (calculated   according   to   the  
r

elative speeds of your vehicle and the
vehicle in front and the inter-vehicle time
setting
 c

hosen),
-

w
hen the distance between your vehicle
and the one in front becomes too small,
-

w
hen the speed of the vehicle in front is too
low,
-

w
hen the speed of your vehicle becomes
too
  low.
The dynamic cruise control cannot in any
circumstances replace the observation
of
 sp

eed
 l

imits,
 n

or
 t

he
 n

eed
 fo

r
 v

igilance
 o

n
 
the
 
part
 
of
 
the
 
driver.
It
 
is
 
recommended
 
that
 
you
 
always
 
keep
 y

our
 
feet
 
close
 
to
 
the
 
pedals.
If
 
the
 
speed
 
setting
 
selected
 
is
 
above
 
9

0
 
mph
 
(150
 
km/h),
 
the
 
system
 
switches
 
t

o standard cruise control operation,
with
 
no
 
adjustment
 
of
 
the
 
inter-vehicle
 
s

afe
 
distance
 
(a
 
message
 
appears
 
in
 
t

he
 
instrument
 
panel). The
  inter-vehicle   time   setting   is   kept   in  
m

emory   on   switching   off   the   ignition.
The dynamic cruise control operates by
day
 
and
 
at
 
night,
 
in
 
fog
 
or
 
in
 
moderate
 
r

ainfall.
The system does not act on the braking s ystem,   but   works   only   with   engine   braking.
The
  regulation   range   is   limited:   there   will
 n

o   longer   be   any   adjustment   of   speed   if   the
 d

ifference   between   the   programmed   speed
 s

etting   and   the   speed   of   the   vehicle   in   front
 b

ecomes   too   high   (18   mph   (30   km/h)).
If the difference between the
programmed  speed   setting   and   the  
s

peed of the vehicle in front is too
great,
  the   speed   cannot   be   adjusted:  
t

he cruise control is automatically
deactivated.
4
Driving

162
C4-Picasso-II_en_Chap04_conduite_ed01-2016
1. Select  cruise   control   mode.
2. U se the current speed of the vehicle as
the
  cruise   speed   setting   /   Lower   the   speed  
se

tting.
3.
U

se the current speed of the vehicle as
the
  cruise   speed   setting   /   Raise   the   speed  
se

tting.
4.
 P

ause   /   Resume   the   cruise   control.
5.
D

isplay the list of memorised speeds, or
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
S

elect the inter-vehicle distance (" Close",
" Normal ", "Distant ")
For more information on Memorising speeds ,
refer
  to   the   corresponding   section.
For more information on Speed limit
recognition and its memorisation, refer to the
corresponding
 s

ection.
Steering mounted controls
Switching on
The active cruise control must be selected in
the Driving  menu.
F

T
urn the thumbwheel 1 to the " CRUISE"
position:
  cruise   control   mode   is   selected,  
b

ut   is   paused.
F

P
ress one of the buttons 2 or 3 :
  the   current  
s

peed of your vehicle becomes the cruise
speed
  setting.
The
  cruise   control   is   activated   (ON).
By default, the inter-vehicle time is set at
2 seconds.
Other wise, the last speed value set will be used
for
  operation   of   the   system.
Modification of the cruise control
speed
- using  buttons   2   or   3:
F b y successive short presses, to modify
by
  steps   of   +   or   -   1   mph   (km/h),
F

b
y a maintained press, to modify in steps
of
  +   or   -   5   mph   (km/h).
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speed   settings   are  
d

isplayed in the touch screen tablet,
F
 
c
hoose   a   speed   setting:   it   is   displayed   in  
t

he   instrument   panel.
The selection screen closes after a few
moments.
  The   modification   is   then   taken   into  
a

ccount.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The
  speed   setting   is   then   displayed   in   the  
in

strument
 pan
el.
As a precaution, it is recommended that
you
 
select
 
a
 
speed
 
setting
 
close
 
to
 
the
 
c

urrent
 
speed
 
of
 
your
 
vehicle.
Operation
For more information on Speed limit
recognition and its memorisation, refer to the
corresponding
 s

ection.
Driving

163
C4-Picasso-II_en_Chap04_conduite_ed01-2016
In the event of the presence of a
vehicle detected by the radar, if the
speed  selected   is   much   higher   than  
t

he speed of that vehicle, the system
is
  not   activated   and   the   alert   message  
"

Activation not possible, conditions
unsuitable"
  is   displayed   until   driving  
c

onditions are safe to allow activation of
the
  system.
Exceeding the speed setting
The information is grouped together in the instrument pan el.
6.
 I

ndication   of   cruise   control   pause/resume.
7.
I

ndication of selection of cruise control
mode, or
 v

ehicle   speed   adjustment   phase.
8.
 C

ruise   speed   setting,   or
 a

djusted   speed   lower   than   the   cruise  
se

tting.
Displays in the instrument panel
Modification of the inter-vehicle
distance
Press button 6 to choose a new inter-vehicle
distance   setting   from   the   3   available   ("Close ",
" Normal ", "Distant ").
This value remains in memory, whatever the
state
  of   the   system.
It
  is   possible   to   exceed   the   speed   setting  
t

emporarily   by   depressing   the   accelerator  
ped

al.
Then simply release the accelerator pedal to
return
  to   the   programmed   speed.
If
  the   speed   setting   is   unintentionally   exceeded,  
d

escending   a   steep   hill   for   example,   the   speed  
s

etting   in   the   instrument   panel   flashes   as   a  
w

arning.
4
Driving