2016 Citroen C4 Owner's Manual

175
C4-2_en_Chap06_conduite_ed02-2015
Electric parking brake
The electric parking brake has two operating modes:
-

A
utomatic application / release
 A

pplication   is   automatic   when   the   engine  
s

tops,   release   is   automatic   on   use   of   the  
a

ccelerator   (activated   by   default),
-

M
anual application / release
 T

he   parking   brake   can   be   applied   /  
r

eleased   manually   by   pulling   control  
l

ever

A.
If
  this   warning   lamp   comes   on   in  
t

he   instrument   panel,   the   automatic  
m

ode   is   deactivated.Programming the mode
Depending on  t he  c ountry  o f  s ale  o f  t he  v ehicle,  t
he   automatic   application   when   the   engine   is  
s

witched   off   and   the   automatic   release   when  
y

ou   press   the   accelerator   can   be   deactivated.
Activation
  /   deactivation   is   done  
u

sing   the   vehicle   configuration  
m

enu;   refer   to   the   section   covering  
t

he   configuration   of   your   vehicle's  
s

ystems.
The
  parking   brake   is   then   applied   and   released  
m

anually.   When   the   driver's   door   is   opened,  
t

here   is   an   audible   signal   and   a   message   is  
d

isplayed   if   the   parking   brake   is   not   applied.It
  is   recommended   that   you   do   not  a
pply   the   parking   brake   in   very   cold  c
onditions   (ice)   and   during   towing  
(

breakdown,   caravan...).   Deactivate   the  
a

utomatic   functions   and   release   the  
par

king
 b
rake
 m
anually.
Do
  not   place   any   object   (packet   of  
c

igarettes,   telephone...)   between   the  
g

ear   lever   and   the   electric   parking  
b

rake   control   lever.
6
Driving

176
C4-2_en_Chap06_conduite_ed02-2015
With the vehicle stationary, to apply the parking brake   whether   the   engine   is   running   or   off,   pull
control lever A .
The
  application   of   the   parking   brake   is  
c

onfirmed   by:
-
 i

llumination
 o
f
 t
he
 b
raking
 w
arning
 l

amp   and   of   the   P
 
warning   lamp   in
 t

he control lever A ,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
When
  the   driver’s   door   is   opened   with   the  
e

ngine   running,   a   message   is   displayed  
a

ccompanied   by   an   audible   signal   if   the   parking  
b

rake   has   not   been   applied,   except   in   the   case  
o

f   an   automatic   gearbox   with   the   gear   selector  
i

n position P .
Before
  leaving   the   vehicle,   ensure
 t

hat   parking   brake   warning   lamp   in   the
 i

nstrument   panel   is   on   fixed,   not   flashing.
Manual applicationManual release
The full application of the parking brake is c
onfirmed   by:
-
 
t
he   braking   warning   lamp   and  
t

he P   warning   lamp   in   the   control  
l

ever A   going   off,
-
 
d
isplay   of   the   message   "Parking  
b

rake   off ".
If you pull control lever A  without  pressing t
he   brake   pedal,   the   parking   brake   will n

ot   be   released   and   a   warning   lamp   will
 c

ome   on   in   the   instrument   panel.
With the ignition on or the engine running, to release   the   parking   brake,   press on the brake
pedal or the accelerator, pull then release
control A . If
  necessary,   you   can   make   a   maximum
application
 
of   the   parking   brake.   This   is  
o

btained
 by m
eans
 o
f
 a long
pull
on the control
lever A ,   until   you   see   the   message   "Parking  
b

rake   on   maximum"   and   a   beep   is   heard.
In   the   case   of   towing,   a   loaded   vehicle   or  
p

arking   on   a   gradient,   make   a   maximum  
a

pplication   of   the   parking   brake   then   turn   the  
f

ront   wheels   towards   the   pavement   and   engage  
a

  gear   when   you   park.
After
  a   maximum   application,   the   release   time  
w

ill   be   longer.
Maximum application
Maximum application is essential:
- i n   the   case   of   a   vehicle   towing   a   caravan  
o

r   a   trailer,   if   the   automatic   functions   are  
a

ctivated   but   you   are   applying   the   parking  
b

rake
 m
anually,
-
 
w
hen   the   gradient   you   are   parked   on   may  
v

ary   (e.g.   on   a   ferry,   on   a   lorry,   during  
tow

ing).
Driving

177
C4-2_en_Chap06_conduite_ed02-2015
Automatic release
Full release of the parking brake is confirmed by:
-
 
t
he   braking   warning   lamp   and  
t

he P   warning   lamp   in   the   control  
l

ever A   going   off,
-
 
d
isplay   of   the   message   "Parking  
b

rake   off ".
Automatic application,
engine off
- illumination of t he b raking w arning l
amp   and   of   the   P  warning   lamp   in t

he control lever A ,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
The
 
application   of   the   parking   brake   is  
c

onfirmed   by:
With
 
the
 
vehicle   stationary,   the   parking   brake  
i

s automatically applied when the engine is
switched off .
Before   leaving   the   vehicle,   ensure  
t

hat   parking   brake   warning   lamp   in  
t

he
  instrument   panel   is   on   fixed   (not  
f

lashing).
Never leave a child alone inside the
vehicle
  with   the   ignition   on,   as   they  
c

ould   release   the   parking   brake.
When stationary, with the engine running, do not press the accelerator pedal unnecessarily,
as
  you   may   release   the   parking   brake.
In the case of towing, a loaded vehicle or   parking   on   a   gradient,   turn   the   front  
w

heels   towards   the   pavement   and  
e

ngage   a   gear   when   you   park.The
  electric   parking   brake   releases
automatically and progressively when you
press   the   accelerator:
F
M
anual gearbox:
press down fully on the
clutch   pedal,   engage   first   gear   or   reverse,  
p

ress on the accelerator pedal and
move off.
F
A
utomatic gearbox
:   select   position   D
, M
or R   then   press   the   accelerator   pedal.
Immobilising the vehicle,
engine running
- illumination
  of   the   braking  w
arning   lamp   and   the   P   warning  
l

amp   in   the   control   lever   A,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
When
 
the
  driver’s   door   is   opened,   a   message   is  
d

isplayed
  accompanied   by   an   audible   signal,   if  
t

he
 
parking   brake   has   not   been   applied,   except  
i

n
 
the
 
case   of   an   automatic   gearbox   with   the  
g

ear
 
selector   in   position   P.
The
 
application   of   the   parking   brake   is  
c

onfirmed   by:
With
 
the
 
engine   running   and   the   vehicle  
s

tationary,   in   order   to   immobilise   the   vehicle  
i

t is essential to manually
 
apply   the   parking  
b

rake
 
by
 
pulling
control lever A .
Before   leaving   the   vehicle,   ensure
 t

hat   parking   brake   warning   lamp   in   the
 i

nstrument   panel   is   on   fixed,   not   flashing.
6
Driving

178
C4-2_en_Chap06_conduite_ed02-2015
Particular situations
In certain situations (e.g. starting the engine), the   parking   brake   can   automatically   alter   its  
f

orce.   This   is   normal   operation.
To
  advance   your   vehicle   a   few   centimetres  
w

ithout   starting   the   engine,   but   with   the   ignition  
o

n,   press   on   the   brake   pedal   and   release   the  
p

arking   brake   by pulling then releasing the
control lever A .
  The   full   release   of   the   parking  
b

rake   is   confirmed   by   the   warning   lamps   in  
t

he control lever A   and   in   the   instrument   panel  
g

oing   off   and   display   of   the   message   "Parking  
b

rake   off ".
Emergency braking
In the event of failure of the electronic
stability   control   system,   signalled   by t

he   illumination   of   this   warning   lamp,
 b

raking   stability   is   then   not   guaranteed.
In
 
the
 
event
 
of
 
a
 
failure
 
of
 
the
 
main
 
service
 
b

rake
 
or
 
in
 
an
 
exceptional
 
situation
 
(e.g.
 
driver
 
t

aken
 
ill,
 
under
 
instruction,
 
etc)
 
a
 
continuous
 
p

ull on the control lever A
 
will
 
stop
 
the
 
vehicle.
The electronic stability control provides stability
during
 em

ergency
 b

raking.
If
 
the
 
emergency
 
braking
 
malfunctions,
 
t

he
 
message
 
"Parking
 
brake
 
faulty"
 
will
 
be
 
d

isplayed. The
  emergency   braking   must   only   be  
us

ed
 in e
xceptional
 c
ircumstances.
In
 
this
 
event,   stability   must   be   assured   by   the  
d

river
 
by
 
repeating   alternate   "pull-release"  
a

ctions on the control lever A .
Driving

179
C4-2_en_Chap06_conduite_ed02-2015
Operating faults
If the electric parking brake malfunction warning lamp comes on together with one or more of the warning lamps presented in these tables, place the vehicle   in   a   safe   condition   (on   level   ground,   gear   engaged)   and   contact   a   CITROËN   dealer   or   a   qualified   workshop   without   delay.
Situations Consequences
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
T
he   automatic   functions   are   deactivated.
-
 
H
ill   start   assist   is   not   available.
-
 
T
he   electric   parking   brake   can   only   be   used   manually.
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
M
anual   release   of   the   electric   parking   brake   is   only   available   by   pressing  
t

he   accelerator   pedal   and   releasing   the   control.
-
 
H
ill   start   assist   is   not   available.
-
 
T
he   automatic   functions   and   the   manual   application   are   still   available.
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
T
he   automatic   functions   are   deactivated.
-
 
H
ill   start   assist   is   not   available.
6
Driving

180
C4-2_en_Chap06_conduite_ed02-2015
SituationsConsequences
To   apply   the   electric   parking   brake:
F
 
i
mmobilise   the   vehicle   and   switch   off   the   ignition.
F
 
p
ull   the   control   for   at   least   5   seconds   or   until   application   is   complete.
F
 
s
witch   on   the   ignition   and   check   the   switching   on   of   the   electric   parking  
b

rake   warning   lamps.
The
  application   is   slower   than   during   normal   operation.
To
  release   the   electric   parking   brake:
F
 
s
witch   on   the   ignition.
F
 
p
ull   the   control   and   hold   it   for   approximately   3   seconds   then   release   it.
If
  the   braking   warning   lamp   is   flashing   or   if   the   warning   lamps   do   not   come  
o

n   with   the   ignition   on,   these   procedures   will   not   work.   Place   the   vehicle  
o

n   level   ground   and   have   it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
and possibly
flashing
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the   following  
w

arning
 lam

ps: -
 
O
nly   the   automatic   application   on   switching   off   the   engine   and   automatic  
r

elease   on   acceleration   functions   are   available.
-
 
T
he   manual   application/release   of   the   electric   parking   brake   and   the  
e

mergency   braking   are   not   available.
and possibly
flashing
Battery
 
fault: -
 I

f   the   battery   warning   lamp   comes   on   you   must   stop   immediately   as   soon   as
 t

he   traffic   allows.   Stop   and   immobilise   your   vehicle   (if   necessary,   place   the
 t

wo   chocks   under   the   wheels).
-
 
A
pply   the   electric   parking   brake   before   switching   off   the   engine.
Driving

181
C4-2_en_Chap06_conduite_ed02-2015
6-speed manual gearbox
Engaging 5th or 6th gear Engaging reverse gear
F Raise  the   ring   under   the   knob   and   move  t
he   gear   lever   to   the   left   then   for wards.Only
  engage   reverse   gear   when   the
 v

ehicle   is   stationary   with   the   engine   at   idle.
As a safety precaution and to facilitate
starting   of   the   engine:
-
a
lways select neutral,
-  
p
ress   the   clutch   pedal.
F
 
M

ove
 
the
 
lever
 
fully
 
to
 
the
 
right
 
to
 
enga

ge 5
th or 6th ge a r.
Failure to observe this procedure
may
 
cause
 
permanent   damage   to   the  
g

earbox
 (

engaging
 3rd or 4th gear by m
i st a ke).
6
Driving

182
C4-2_en_Chap06_conduite_ed02-2015
Automatic gearbox
Gear selection gate
1. Gear  selector.
2. B utton " T" (snow) .
3.
B

utton " S" (spor t) .
4.
 P

osition   markings   for   the   gear   selector.P.
 Pa

rk.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-  
S
tarting   the   engine.
R.
 R
everse.
-  
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
 N
eutral.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n.
-  
S
tarting   the   engine.
D.
 A
utomatic
 ope
ration.
M.+ / -
   M
anual   operation   with   sequential  
c

hanging   of   the   six   gears.
F  
P
ush   for wards   to   change   up   through   the  
g

ears.
or
F  P ull   backwards   to   change   down   through  
t

he   gears.
Gear selector positions
When you move the selector in the gate to select   a   position,   the   corresponding   indicator  
c

omes   on   in   the   instrument   panel.
P
 
Pa
rk
R
Reverse
N
Neutral
D
 
D
rive   (automatic   driving)
S

Sp
ort
 pro
gramme
T

S
now
 pro
gramme
1 to 6
   Gear   engaged   during   manual   operation
-
 
I
nvalid   value   during   manual   operation
Displays in the instrument
panelSix speed  automatic  gearbox  which  of fers  a  choice b
etween   the   comfort   of   fully   automatic   operation, e

nhanced   by   sport   and   snow   programmes,   and
 t

he   pleasure   of   manual   gear   changing.
Two
  driving   modes   are   offered:
-

a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,  
w

ith a sport
 
programme   for   a   more  
d

ynamic   style   of   driving   and   a   snow
programme
  to   improve   driving   when  
t

raction is poor,
-

m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver.
Driving