2016 AUDI A5 COUPE Owners Manual

.... N
0 I­co .... .... check your tires as soon as possible, and inflate
them to the proper pressure. Driving on a signifi­
cantly under-inflated tire causes the tire to over­
heat and can lead to t ire failure. Under-inflation
a lso reduces fuel efficiency and tire tread life,
and may affect the vehicle 's handling and stop ­
p ing ability .
Please note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver's re­
sponsib ility to ma intain correct tire pressure,
even if under-inflation has not reached the level
to tr igger illum inat ion of the TPMS low tire p res­
sure telltale.
Your veh icle has also bee n eq uipped w ith a TPMS
malfunct ion indicator to indicate when the sys­
tem is not operat ing properly . The TPMS ma l­
function ind icator is combined w ith the low tire
p ressure tellta le. Whe n the system detects a
malfunct ion, the te lltale will flash fo r approx i­
mately one mi nute and then remain continuo usly
illuminated. This sequence will continue upon
subseq uent veh icle start-ups as long as the ma l­
function ex ists .
When t he malfunction indicator is ill uminated,
the system may not be ab le to detect or signal
l ow tire press ure as intended. TPMS ma lf u nctions
may occur for a var iety of reasons, including the
installation of replacement or alternate t ires or
wheels on the vehicle that prevent the TPMS
from functioning properly . Always c heck the
TPMS malfunction telltale afte r rep lacing one o r
mo re t ires o r whee ls on your ve hicl e to e nsur e
th at t he replacement or al tern ate tir es and
wheels a llow the TPMS to con tinue to function
p roperly .
Wheel s
If the Tire Pressure Monitoring System
indicator appears
Applies to vehicles: with tire pressure monitor ing system
The tire pressure indicator in th e instrument
cluster informs you if the tire pressure is too low
or if there is a sys tem malfunction.
Fi g. 17 1 Instrumen t cl uster: indicator lig ht w ith mess age
U sing the ABS sensors, the t ire pressure monito r­
ing system compares the tire tread c ircumfer­
ence and v ibration characterist ics of the ind iv idu ­
al tires. If the press ure changes in one or more
t ir es, th is is indicated in the instrument cluster
display with an indica to r li ght
HE and a message.
If only one tire is affected, the loc ation of tha t
t ir e will be indicated.
T he t ire press ures mus t be stored in the Infota in­
me nt system again each time t he pr essures
c h ange (switching between parti al and full load
pressure) or afte r changing or replac ing a tire on
yo ur vehicle ¢
page 224 . The tire p ressure moni­
toring system on ly monitors the tire pressure you
have stored. Re fer to the t ire pressure label for
the recommended t ire pressure for yo ur vehicle
r=> page 215, fig . 170.
T ire tread c irc umference and vibration character ­
istics can change and ca use a tire press ure warn­
ing if :
- the tire pressure in one or more tires is too low.
- t he t ire h as str uctural damage.
- t he t ire w as re pla ce d or the t ire pressu re was
ch anged and it was no t stored ¢
page 224 .
- the spare tire* is i nstalled .
Indicator lights
HE Loss of pressure in at least one tire¢.& .
Check the tires and replace or repair if necessary .
IJJ,,
223

Wheels
Check/correc t the p ress ures o f all four tires and
store the pressure again in the Infotainment sys­
tem
¢ page 224.
mm (Ti re Pressure Moni to ring System) Tire
pressure: S ystem malfunction !.
Ifm:im appears
after switc hing the ignition on or whi le driving
and the
RI] i ndicator light in the instrument cl us­
ter blinks for approximate ly one minute and then
stays on, there is system malfunction. Try to
store the correct tire pressures¢
page 224 . If
the ind icator light does tur n off or turns on again
after a short period of t ime, dr ive to an a uthor­
ized Audi dealer o r autho rized Aud i Service Faci li­
ty immedia tely to have the malfunct ion corre ct­
ed .
A WARNING
- If the ti re pressu re indicator appears in the
display, reduce your speed immediate ly and
avoid any hard steering or braking maneu­
vers. Stop as soon as possib le and check the
t ires and t heir pressure.
- The driver is responsib le for maintaining the
correct tire pressure. You must check the
t ire pressure regu larly .
- Under certain conditions (such as a sporty
dr iv ing style, winter cond itions or unpaved
roads), the pressure mon itor indicator may
be delayed.
- Do not use run-flat tires on your vehicle. Us­
ing them when not permitted can lead to
vehicle damage or accidents.
(D Tips
- The t ire pressure monitoring system can al­
so stop work ing when there is an ESC mal­
funct ion.
- Using snow chains may result in a system
malfunction.
- The t ires with the identification "AO" or
"RO" ¢
page 212 have been matched with
your Audi tire pressure monitoring system .
We recommend that you use these t ires.
224
· Storing tire pressures
Applies to vehicles: with tire pressure mo nitoring system
If the tire pressure changes or a tire is replaced,
it must be confirmed in the Infotainment sys­
tem .
.,. Make sure before stor ing that the t ire pressures
of all four tires meet the specified values and
are adapted to the load
¢ page 215.
.,. Sw itch on the ign ition .
.,. Sele ct: the
I CARI fu nct ion button > Tire pres·
s ure monitoring
cont rol button. O r
.,. Select: the
I CAR I fun ct ion but ton > Car Sys­
tem s*
control b utton > Serv icing & checks >
Tire pressure mon itoring .
(D Tips
Do not store the tire pressures if snow chains
are installed .

,-1 N
0 1-CX)
,-1 I.Cl U"I
,-1 I.Cl ......
Emergency assistance
Vehicle tool kit
The tools ore stored underneath the floor panel
in the luggage comportment.
Fig. 172 Luggage compartment: tool ki t
When you need access to the veh icle tool kit or
jack*, you will need to take out the spare tire*
and cover
qpoge 225.
The vehicle tool kit includes:
- Hook for removing wheel covers*
- Plastic hook to remove wheel bolt covers*
- Alignment pin for changing the wheel
- Screwdriver with reversible blade
- T ool for changing l ight bulbs
- Revers ible b it (reversible Torx bit for changing
li ght bulbs)
- Rod for jack
- Jack*
- Lug wrench
- Towing eye
Some of the vehicle items listed above are pro­
vided on certa in models only or are optional ex­
tras.
Before return ing the jack* to its place, retract the
jack arm f ully.
_& WARNING
-Never use the screw driver hex head to
tighten wheel bolts, since the bo lts cannot
attain the necessary tightening torque if you
use the hex head, potentially causing an ac­
c ident.
- The factory-supplied jack is intended on ly
for your vehicle model. Under no circum-
Emergency assistance
stances s hou ld it be used to lift heavy
vehicles or other loads; you risk injuring
yourself.
- Never start the engine when the vehicle is
raised, which could cause an accident.
- Support the vehicle securely with appropri­
ate stands if work is to be performed under­
neath the vehicle; otherwise, there is a po­
tential risk for injury .
(D Tips
The vehicle jack* in your vehicle is mainte­
nance-free.
Space-saving spare tire (compact spare tire)
Applies to veh icles: w ith space-sav ing spare t ire
The spore tire/wheel is located in the luggage
comportment under the cargo floor cover . It is
intended for short-term use only .
Fig. 173 Spare tir e
Removing the spare tire
.. Lift the cargo floor by the p lastic handl e
qfig. 173.
.. Hook the handle into the lugg age compartment
weather strip .
.,. Turn the large screw
qfig. 173 counter-clock ­
w ise.
.. Take out the spare tire .
.. Always store the vehicle tool kit, the jack *, and
t he replaced tire in the luggage compartment
qpoge 118.
.. Unhook the cargo floor before closing the rear
lid . ...
225

Emergency assistance
Using the spare tire (compact spare tire)
The compact spare tire is only intended for emer­
genc ies until you can reach a repair shop. Repla ce
it as qu ickly as possible with a standard wheel
and tir e.
There are some restrictions on the use of the
compact spare tire. The compact spare tire has
been designed specifically for yo ur type of vehi­
cle. It must not be swapped with a compact
spare tire from another type of vehicle.
Snow chains
F or technica l reasons, the use of snow chains on
the compact spare tire is
not permitted .
If you do have to dr ive with snow cha ins and a
front tire fails, mo unt the spare wheel with t ire
instead of a rear tire. Install the snow chains on
the rear tire and use it to rep lace the defective
front tire .
A WARNING
-Never use the spare tire if it is damaged or if
it is worn down to the tread wear indicators.
-If the spare tire is more than 6 years o ld,
use it only in an emergency and with ex­
treme caution and carefu l dr iving .
- The spare tire is intended on ly for tempora­
ry and short-term use. It shou ld be replaced
as soon as possible with the normal wheel
and t ire.
- After mounting the compact spare t ire, the
t ir e pressure must be checked as soon as
poss ible. The tire pressure of the compact
spare tire must be 4.2 bar; otherwise, you
risk having an accident .
- Do not drive faster than SO mph (80 km/h).
You risk hav ing an accident.
- Avoid full-throttle accelerat ion, heavy brak­
ing, and fast cornering. You risk having an
acc ident.
- Never drive using more than one spare
wheel and tire. You risk having an accident .
- Normal summer or winter tires must not be
mounted on the compact spare wheel rim .
- For technical reasons, the use of tire chains
on the spare tire is not perm itted . If it is
226
necessary to drive with tire chains, the spare
wheel must be mounted on the front axle in
the event of a flat in a rear tire. The newly
ava ilable front wheel must then be installed
in place of the rear wheel w ith the flat tire.
Installing the tire chain before mounting
the wheel and tire is recommended.
- Loose items in the passenger compartment
can cause serious personal injury during
ha rd braking or in an accident. Never store
the spare tire or jack and tools in the pas­
senger compartment.
Replacing wheels
· Before changing a wheel
Observe the following precautions for your own
and your passenger's safety when changing a wheel.
.,. After you experience a tire failure, pull the car
well away from moving traffic and try to reach
level ground before you stop¢ A_.
.,. All passengers should leave the car and move
to a safe location (for instance, behind the
guardrail) ¢
&_.
.,. Engage the parking brake to prevent your vehi­
cle from rolling unintentionally ¢
A_.
.,. Shift into 1st gear on vehicles with manua l
transmission, or move the
selector lever to the
P position
on vehicles with automatic transmis­
sion.
.,. If you are towing a trailer: unhitch the trailer
from your vehicle.
.,. Take the
jack ¢ page 225 and the spare tire
¢ page 225 out of the luggage compartment .
A WARNING
You or your passengers could be injured while
changing a whee l if you do not follow these
safety precaut ions:
- If you have a flat tire, move a safe distance
off the road. Turn off the engine, turn the
emergen cy flashers on and use other warn­
ing devices to alert other motorists.

.... N
0 I­co .... .... -Make sure that passengers wait in a safe
place away from the vehicle and well away
from the road and traffic.
- To help prevent the vehicle from moving
suddenly and possibly slipping off the jack,
always fully set the parking brake and block
the wheel diagonally opposite the wheel be ­
ing changed with the folding chocks or oth­
er objects. When one front wheel is lifted
off the g round, plac ing the Automatic
T ransmission in "P" (Park) will
not prevent
the vehicle from moving .
- Before you change a wheel, be su re t he
ground is level and firm. If necessary, use a
stu rdy board under the jack.
- Always sto re the veh icle tool k it, the jac k*
and the replaced tire in the luggage com­
partment ¢
page 118 .
(1) Note
If you are cha nging the whee l on a steep in­
cline, use a rock or similar objec t to block the
opposi te whee l to prevent the veh icle from
moving.
@ Tips
Obey all laws .
Changing a wheel
When you change a wheel, follow the sequence
described below step-by-step and in exactly that
order.
1. Remove the deco rative wheel cover * or the
whe el bolt cap s*. For more deta ils see also
¢ page 228, Decorative wheel covers or
¢ page 228, Wh eels with wh eel bolt caps.
2. Loosen the wheel bol ts ¢ page 228.
3 . Locate the proper mounting point for the
jack and align the jack below that point
¢ page 229.
4. Lift the car with the jack¢ page 229.
5 . Remove the
whe el with the flat tir e and then
insta ll the
s pare tire ¢ page 230 .
6. Tighten all wheel bo lts lightly.
7 .
Low er th e ve hicle w it h the ja ck .
Em ergenc y ass is tanc e
8. Use the wheel bolt wrench and firmly tighten
all wheel bo lts in a crisscross pattern
¢ page 228.
9. Replace the deco rati ve w heel co ver* or the
wheel bolt caps* .
A WARNING
Always read and follow all WARNINGS and in­
fo rmation
¢ .&. in Raising the vehicle on
page229and ¢page 231.
After changing a wheel
A wheel change is not complete without the do ­
ing the following .
.,. Always store the vehicle too l kit, the jack*, and
the replaced tire in the luggage compartment
¢ page 118 .
.,. Check the tire pres sure of the spare tire as soon
as poss ible.
.,. As soon as poss ib le, have the
tigh tening tor ­
qu es
on a ll wheel bolts checked with a torque
w rench. The correct tightening torque is
90 ft
lbs.
(120 Nm) .
.,. Hav e the flat tire
repl aced as soon as possible .
(D Tips
-If you notice that the wheel bo lts are co r­
roded and difficult to turn while changing a
tire, they shou ld be replaced before you
check the tightening torque.
- Drive at reduced speed unti l yo u have the
tightening torques checked.
227

Emergency assistance
Decorative wheel covers
Applies to vehicles: with decorative wheel covers
The decorative wheel covers must be removed
first to access the wheel bolts.
F ig. 1 74 Chang ing a wheel: removing the wheel cover
Removing
• Inse rt the hook provided wi th the ve hicle too l
kit in t he ho le in the hub.
• Pu ll off the
decorative wheel cover <9 fig. 174 .
Wheels with wheel bolt caps
Applies to vehicles: with wheel bolts with caps
The cops must be removed first from the wheel
bolts before the bolts con be unscrewed .
Fig . 175 Chang ing a wheel: remov ing the wheel bolt caps
Removing
• Push the plastic clip provided with the vehicle
tool kit over th e wheel bolt cap unt il it engages.
• Pu ll on the
plastic clip to remove the cap
q fig. 175.
Refitting
• Place the caps over the wheel bo lts and push
them back on.
228
The caps are to protec t and keep the wheel bo lt s
clean .
Loosening and tightening the wheel bolts
The wheel bolts must be loosened before raising
the vehicle.
Fig . 176 Chang ing a w hee l: loose ning th e wheel bolts
Loosening
• Install the wheel bolt wrench over the wheel
bolt and push it down as far as it will go.
• Take tight hold of the
end of the wrench hand le
and turn the w heel bolts
counter-clockwise
about one single turn in the direction of a rrow
~fig. 176.
Tightening
• Insta ll the wheel bolt wren ch over the wheel
bolt and push it down as far as it w ill go.
• Take tight hold of the
end of the wr ench hand le
and tur n each w heel bo lt
clockwise until it is
se ated.
_&. WARNING
- Do no t use force or hurry when c hanging a
w heel -yo u can cause t he ve hicle to slip of f
the jack and cause serious persona l injuries.
- Do not loosen the wheel bo lts more than
one turn
before yo u raise the vehicle with
the jack . - You r is k an injury .
(D Tips
-Never use t he hex agona l soc ket in the han­
dle of the screwdrive r to loosen or tighten
t h e whee l bolts .

,-1 N
0 1-CX)
,-1 I.Cl U"I
,-1 I.Cl ......
-If a whee l bolt is very tight, you may find it
easier to loosen by carefully pushing down
on the end of the wheel bo lt wrench with
one foot only. As you do so, hold on to the
car to keep your balance and take care not
to slip.
Raising the vehicle
The vehicle must be li~ed with the jack first be­
fore the wheel can be removed .
Fig. 177 Sill pane ls: mark ing s
Fig. 178 Sill: po sit ion in g the ve hicle jack
The location of the jack point is indicated by an
indentation on the underside of the vehicle
~ fig . 177 .
.,. Activate the parkin g brak e to prevent the vehi­
cl e from roll ing unintentionally.
.,. Shift into
1st g ear on vehicles with manual
t ransm ission or
move the selector lever to the P
position on v ehicles with automatic transmis­
sion.
.,. Find the
ma rki ng (imprint) on the sill that is
nearest the wheel that will be changed
~ fig . 177 . Behind the marking, there is a lift­
ing point
on the sill for the vehicle jack .
.,. Turn the
vehi cle jack located under the lifting
po in t on the s ill to ra ise the jack until the jaw
Em ergen cy a ssis tanc e
~ fig. 178 @covers the notch on the ve hicle
~ A ~0 .
.,. Align the vehicle jack so the jaw@ covers the
notch and the base pla te ® is flat on the floor.
The base p late ® must be
vertical under the
lifting point @.
.,. Install the rod on the vehicle jack: Insert the
rod into the open ing o n the handwheel. Turn
the rod left or righ t to secu re it.
.,. Continue ra is ing the jack wi th the rod unti l the
wheel lifts off the ground slight ly .
Pos ition the vehicle jack
only unde r the des ignat­
ed lift ing po ints on the sill
c:!> fig. 177 . There is ex­
act ly
one l oca tion for each wheel. The jack must
not be positioned at any other location
c:!> &,. c:!>(D .
Soft ground under the jack ca n cause t he vehicle
to slip off the jack. A lways p lace the ja ck on firm
ground. Use a f lat, stab le support if necessary.
Use a non-s lip surface s uch as a rubbe r mat on a
slipper y surfa ce such as tile .
A WARNING
-
-You o r your passengers could be in jured
while changing a wheel if you do not follow
these safety precautions :
- Position the vehicle jack only at the des ig­
na ted lift ing po ints and alig n the jack.
Otherwise, the veh icle jack could slip and
cause an injury if it does not have suffi­
cient hold on the vehicle.
- A soft or unstab le surface under the jac k
may cause the vehicle to slip off the jack.
Always provide a firm base for the jack on
the ground. If necessary, use a sturdy board under the jack .
- On hard, slippery surface (s uch as tiles)
use a rubber mat or similar to prevent the
j ack from slipping.
- To help prevent in jury to yourse lf and your
passengers:
- Do not raise the ve hicle until you are sure
the jack is securely engaged.
- Passengers must not remai n in the vehicle
whe n it is jacked up .
~
229

Emergency assistance
-Make sure that passengers wait in a safe
place away from the vehicle and well away
from the road and traff ic.
- Make sure jack position is correct, adjust
as necessary and then cont inue to raise
the jack.
(D Note
Do not lift the vehicle by the sill. Position the
vehicle jack only at the designated lifting points on the sill. Otherwise, your vehicle will
be damaged.
Taking the wheel off /installing the spare
tire
Follow these instructions step-by-step for chang­
ing the wheel .
Fig. 179 Changing a wheel: using the screwdriver handl e
(with the blade removed) to turn the bolts
Fig. 180 Changing a wheel: alignment pin insid e the top
hole
After you have loosened all wheel bolts and raised the vehicle off the ground, remove and re­
place the whee l as follows:
Removing the wheel
• Remove the topmost wheel bolt comp letely
with the
hexagonal socket in the screwdriver
230
handle (vehicle tool kit) ¢ fig. 179 and set it
aside on a
clean surface.
• Screw the threaded end of the
alignment pin
from the tool kit hand-tight into the empty bolt
hole ¢
fig. 180.
• Then remove the other wheel bolts as described
above.
• Takeoff the whee l leaving the alignment pin in
the bolt hole¢ (!).
Putting on the spare tire
• Push the spare tire over the alignment pin.
• Screw on the wheel bolts and tighten them
slightly using the hexagonal socket.
• Remove the alignment pin and insert and t ight­
en the remaining wheel bolt slightly like the
rest.
• Tur n the jack hand le counter-clockw ise to lower
the vehicle until the jack is fully released.
• Use the wheel bolt wrench to tighten a ll wheel
bolts firmly ¢
page 228. Tighten them in a
crisscross pattern,
from one bolt to the (ap­
proximately) opposite one, to keep the wheel
centered.
• Perform the steps required after chang ing the
wheel¢
page 227, A~er changing a wheel.
The hexagonal socket makes it easier to remove
the wheel bo lts from the rim . Care should be tak­
en when removing the reversible blade.
(D Note
When removing or installing the wheel, the
rim could hit the brake rotor and damage the
rotor . Work carefully and have a second per­
son to help you.
(D Tips
-When mounting tires with unidirectional
tread design
make sure the tread pattern is
pointed the right way¢
page 231.
-The wheel bolts should be clean and easy to
turn. Check for dirt and corrosion on the
mating surfaces of both the wheel and the
hub. Remove all dirt from these surfaces be­
fore remounting the wheel.