2015 VOLKSWAGEN JETTA HYBRID Owners Manual

Instrument cluster

– When the electric drive is activated, the needle moves from /&& to /.
(3) Displays ⇒  Displays. The hybrid power is displayed after the ignition is switched on Starting and stopping the engine.
(4) Reset button for the trip odometer display (trip).
– Push the /./

x Odometer displays
x Time
x Outside temperature
x Selector lever position ⇒  Shifting
x Driving data and menus for different settings ⇒  Volkswagen Information System
x Service reminder display ⇒  Service reminder display
x Hybrid drive information ⇒  Information on the hybrid drive system
x Engine code
Open doors, hood, or luggage compartment lid
The instrument cluster display indicates if any doors, the engine hood, or luggage compartment lid are open once the vehicle has been unlocked, and while the vehicle is in motion. There may also be an audible warning chime. Different models and equipment versions may have different displays.

Key to ⇒ fig. 11 See
A

Type of no-
tification
Symbol
color
Explanation
Priority 1
warning
message
Red Symbol flashing or lit – sometimes with acoustic
warnings.

Selector lever position
The selector lever position is shown both on the side of the selector lever and in the instrument cluster display. The respective gear may also be shown in the instrument cluster display in Drive (D) and
Sport Drive (S), as well as in Tiptronic® mode ⇒  Shifting.
Hybrid drive information
The following information for the hybrid drive is shown in the instrument cluster display:
x Vehicle readiness indicator READY ⇒ Starting and stopping the engine.
x Full electro-mode drive indicator E-MODE ⇒  Information on the hybrid drive system.
x Information and warnings ⇒  Information on the hybrid drive system.
x Electrical driving performance display (E-Powermeter) ⇒  Information on the hybrid drive system.
x Display showing the energy flow between the drive unit (electric motor or combustion engine), the
drive wheels, and the high-voltage battery ⇒  Information on the hybrid drive system.
Engine identification code
Press and hold the /./

If there are multiple warning messages, the symbols are displayed for several seconds in order of importance. The symbols are displayed until the cause has been corrected.
Service reminder display

Resetting the inspection service reminder
If the service was not performed by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility, the inspection service reminder can be reset as follows:

1. Switch off the ignition.
2. Switch on the emergency flashers.
3. Press and hold the /./

Volkswagen Information System