2015 NISSAN JUKE ignition


> (GLW   0RGHO )'@
6-2
In case ofemergency
GUID-F8 C8FFF6-A599 -4B3B-A1E6-F9439E4 BD2DC
SIC2574
Push theswitch ontowarn other drivers when
you must stoporpark under emergency condi-
tions. Allturn signal lightswillflash.
WARNING
. Ifstopping foranemergency, be
sure tomove thevehicle welloffthe
road.
. Do not use thehazard warning
flashers whilemoving onthe high-
way unless unusual circumstances
force youtodrive soslowly that
your vehicle mightbecome ahazard to
other traffic.
. Turn signals donot work when the
hazard warning flasherlightsare
on.
The flasher canbeactuated withtheignition
switch inany position.
Some statelawsmayprohibit theuse of
the hazard warning flasherswitchwhile
driving.
GUID-7C6 757DA-C9FC- 43FC-9E43-9CB1131A89 D7
T o shut offthe engine inan emergency situation
while driving, perform thefollowing procedure:
. Rapidly pushthepush-button ignitionswitch
3 consecutive timesinless than 1.5
seconds, or
. Push andhold thepush-button ignition
switch formore than2seconds.
HAZARD WARNING FLASHER
SWIT CH EMERGEN
CY ENGINE SHUTOFF
&RQGLWLRQ


> (GLW   0RGHO )'@
SCE0981
WARNING
Always followtheinstructions below.
Failure todo socould result indamage
to the charging systemandcause
personal injury.
1. Ifthe booster batteryisin another vehicle
*
B
, position thetwo vehicles (
*
A
and
*
B
)
to bring theirbatteries intoclose proximity to
each other.
Do not allow thetwo vehicles totouch. 2.
Apply theparking brake.
3. Continuously Variable Transmission
(CVT) models:
Move theshift lever tothe P(Park) position.
Manual Transmission (MT)models:
Move theshift lever tothe N(Neutral)
position.
4. Switch offallunnecessary electricalsystems
(headlights, heater,airconditioner, etc.).
5. Remove thevent caps onthe battery (ifso
equipped) .Cover thebattery withafirmly
wrung outmoist clothtoreduce explosion
hazard. 6.
Connect jumpercablesinthe sequence as
illustrated (
*
1
?
*
2
?
*
3
?
*
4
) .
If the battery isdischarged, theignition
switch cannot bemoved fromtheOFF
position. Connectthejumper cablesto
the booster vehicle
*
B
before pushing
the ignition switch.
CAUTION
. Always connect positive(+)toposi-
tive (+)and negative (


> (GLW   0RGHO )'@
6-10
In case ofemergency
CAUTION
Do not keep thestarter motorengaged
for more than10seconds. Ifthe engine
does notstart right away, placethe
ignition switchinthe OFF position and
wait 10seconds beforetryingagain.
9. After starting yourengine, carefully discon-
nect thenegative cableandthen thepositive
cable (
*
4
?
*
3
?
*
2
?
*
1
) .
10. Replace thevent caps (ifso equipped) .Be
sure todispose ofthe cloth usedtocover
the vent holes asitmay becontaminated
with corrosive acid.
GUID-A764 C60A-F34B- 45BD-8A21-8 3DCBF259F31
Do not attempt tostart theengine bypushing.
CAUTION
. Continuously Variable Transmission
(CVT) models cannotbepush-
started ortow-started. Attempting
to do somay cause transmission
damage.
. Three-way catalystequipped mod-
els should notbestarted bypushing
since thethree waycatalyst maybe
damaged.
. Never trytostart thevehicle by
towing it; when theengine starts,
the forward surgecouldcause the
vehicle tocollide withthetow
vehicle.
GUID-70 6E277F-8F7 5-437A-8E9B -3AA46086CF31
CAUTION
. Do not continue todrive ifyour
vehicle overheats. Doingsocould
cause engine damage oravehicle
fire.
. To avoid thedanger ofbeing
scalded, neverremove theradiator
cap while theengine isstill hot.
When theradiator capisremoved,
pressurized hotwater willspurt out,
possibly causingseriousinjury.
. Do not open thehood ifsteam is
coming out.
If your vehicle isoverheating (indicatedbyan
extremely hightemperature gaugereading) ,or if
you feel alack ofengine power, detectabnormal
noise, etc.,takethefollowing steps:
1. Move thevehicle safelyoffthe road and
apply theparking brake.
2. Continuously Variable Transmission
(CVT) models:
Move theshift lever tothe P(Park) position.
Manual Transmission (MT)models:
Move theshift lever tothe N(Neutral)
position.
PUSH STARTING IFYOUR VEHICLE OVERHEA TS
&RQGLWLRQ


> (GLW   0RGHO )'@
SCE0950
T wo-wheel drivemodels
T OWING RECOMMENDE DBY
NISSAN
GUID-09B96 2BF-4170-4F2F-83C9 -E1E70F0C2C59
T wo-Wheel Drive(2WD) models
GUID-528 26B00-51 B3-4A50-B8 98-5192FE87 088D
NISSAN recommends thatyour vehicle be
towed withthedriving (front)wheels offthe
ground orplace thevehicle onaflat bed truck as
illustrated.
CAUTION
. Never towCVT models withthefront
wheels onthe ground orfour
wheels onthe ground (forward or
backward) ,as this may cause ser- ious
andexpensive damagetothe
transmission. Ifitis necessary to
tow thevehicle withtherear wheels
raised, always usetowing dollies
under thefront wheels.
. When towing CVTmodels withthe
front wheels ontowing dollies:
Push theignition switchtothe
ACC orON position, andsecure
the steering wheelinastraight-
ahead position witharope orsimi-
lar device. Movetheshift lever to
the N(Neutral) position. .
When towing aCVT model withthe
rear wheels onthe ground (ifyou do
not use towing dollies):Always
release theparking brake.
In case ofemergency
6-13
&RQGLWLRQ

 
> (GLW   0RGHO )'@
GUID-5DF3 0ED3-11F3-4E 7A-8844-31D0A6DFC586
When performing anyinspection ormainte-
nance workonyour vehicle, alwaystakecare
to prevent seriousaccidental injurytoyourself or
damage tothe vehicle. Thefollowing aregeneral
precautions whichshould beclosely observed.
WARNING
. Park thevehicle onalevel surface,
apply theparking brakesecurely
and block thewheels toprevent
the vehicle frommoving. Movethe
shift lever tothe P(Park) position
(CVT model) orthe shift lever tothe
N (Neutral) position(MTmodel) .
. Besure theignition switchisin the
OFF orLOCK position whenper-
forming anyparts replacement or
repairs.
. Ifyou must workwiththeengine
running, keepyourhands, clothing,
hair andtools away frommoving
fans, belts andanyother moving
parts.
. Itis advisable tosecure orremove
any loose clothing andremove any
jewelry, suchasrings, watches, etc.
before working onyour vehicle. .
Always weareyeprotection when-
ever youwork onyour vehicle.
. Ifyou must runtheengine inan
enclosed spacesuchasagarage, be
sure there isproper ventilation for
exhaust gasestoescape.
. Never getunder thevehicle whileit
is supported onlybyajack. Ifitis
necessary towork under thevehicle,
support itwith safety stands.
. Keep smoking materials, flameand
sparks awayfromfueltank andthe
battery.
. The fuel filter orfuel lines should be
serviced byaNISSAN dealerbe-
cause thefuel lines areunder high
pressure evenwhen theengine is
off.
CAUTION
. Do not work under thehood while
the engine ishot. Turn theengine
off and wait until itcools down.
. Avoid directcontact withused en-
gine oiland coolant. Improperly
disposed engineoil,and engine coolant
and/orothervehicle fluids
can damage theenvironment. Al-
ways conform tolocal regulations
for disposal ofvehicle fluid.
. Never leavetheengine orthe CVT
related component harnessesdis-
connected whiletheignition switch
is in the ONposition.
. Never connect ordisconnect the
battery orany transistorized com-
ponent whiletheignition switchis
in the ONposition.
. Your vehicle isequipped withan
automatic enginecooling fan.Itmay
come onatany time without warn-
ing, even ifthe ignition keyisin the
OFF position andtheengine isnot
running. To avoid injury, always
disconnect thenegative battery
cable before working nearthefan.
This ª8.Maintenance anddo-it-yourselfº section
gives instructions regardingonlythose items
which arerelatively easyforanowner toperform.
A genuine NISSAN ServiceManualisalso
available. (SeeªOwner's manual/service manual
order informationº (P.9-21) .)
Y ou should beaware thatincomplete or
Maintena nceand do-it-yo urself
8-5
MAINTENAN CEPRECAUTI ONS
&RQGLWLRQ


> (GLW   0RGHO )'@
JUMP STARTING
GUID-C37 C3C0F-280C -4F1D-904A-46ACD5752008
If jump starting isnecessary ,see ªJump startingº
(P .6-8) .If the engine doesnotstart byjump
starting, thebattery mayhave tobe replaced.
Contact aNISSAN dealer.
GUID-0A40 E5F3-EC90-4F03-B955- 4274A23D7967
CAUTION
. Do not ground accessories directly
to the battery terminal. Doingsowill
bypass thevariable voltagecontrol
system andthevehicle battery may
not charge completely.
. Use electrical accessories withthe
engine running toavoid discharging
the vehicle battery.
The variable voltagecontrolsystem measures
the amount ofelectrical discharge fromthe
battery andcontrols voltagegenerated bythe
generator.
GUID-1AF 74337-E57 8-4C98-A7 ED-F2206E 4170AC
SDI1881
1. Alternator
2. Drive beltauto-tensioner
3. Crankshaft pulley
4. Airconditioner compressor
5. Water pump
WARNING
Be sure theignition switchisin the OFF
or LOCK position beforeservicing drive
belts. Theengine couldrotate unex-
pectedly.
1. Visually inspectthebelt forsigns ofunusual
wear, cuts,fraying orlooseness. Ifthe belt is
Maintenance anddo-it-yo urself
8-15
V ARIABLE VOLTAGE CONTROL
S Y STEM DRIVE
BELT
&RQGLWLRQ


> (GLW   0RGHO )'@
8-16
Maintenance anddo-it-yours elf
in poor condition orloose, haveitreplaced
or adjusted byaNISSAN dealer.
2. Have thebelt condition checkedregularly.
GUID-A AF18895-9 2AC-4601-BD 68-201C81BA 060E
WARNING
Be sure theengine andignition switch
are offand that theparking brakeis
engaged securely.
CAUTION
Be sure touse thecorrect socketto
remove thespark plugs. Anincorrect
socket candamage thespark
plugs.
SDI2670
REPLACING SPARK PLUGS
GUID-C62 B4C9C-0259-481F-A 5AB-DFBBB3 D10B69
If replacement isrequired, seeaNISSAN dealer
for servicing.
Iridium platinum-tippe dspark plugs
GUID-E12E 20CD-D386 -439E-A361-4 3DA33D9C4A6
It is not necessary toreplace theiridium
platinum-tipped sparkplugs asfrequently as
the conventional typespark plugs sincetheywill
last much longer. Followthemaintenance log
shown inthe ªNISSAN ServiceandMainte-
nance Guideº.Do not reuse theiridium plati-
num-tipped sparkplugs bycleaning or
regapping.
Always replace sparkplugswithrecom-
mended orequivalent ones.
SP ARK PLUGS
&RQGLWLRQ


> (GLW   0RGHO )'@
8-20
Maintenance anddo-it-yours elf
light tomoderate stopsisnormal anddoes not
affect thefunction orperformance ofthe brake
system.
Proper brakeinspection intervalsshould
be followed. Foradditional information, seethe
maintenance logsection ofyour ªNISSAN
Service andMaintenance Guideº.
GUID-6A8 9546B-C41A- 40D8-9756-83B8312AC E54
SDI2654
ENGINE COMPARTMENT
GUID-7E1 E202F-F646 -45EA-96AE -D77C54247 8CE
CAUTION
Never useafuse ofahigher orlower
amperage ratingthanthatspecified on
the fuse boxcover. Thiscould damage
the electrical systemorcause afire.
If any electrical equipment doesnotoperate,
check foranopen fuse.
1. Besure theignition switchandtheheadlight
switch areturned off. 2.
Open theengine hood.
3. Remove thefuse/fusible linkholder coverby
pushing thetab
*
1
and lifting thecover
from theright side
*
2
, then theleftside
*
3
.
4. Locate thefuse thatneeds tobe replaced.
5. Remove thefuse using thefuse puller
located inthe passenger compartment fuse
box.
FUSES
&RQGLWLRQ