2015 NISSAN JUKE clock


> (GLW   0RGHO )'@
2-22
Instrument sand controls
SETUP FUNCTION
GUID-5B5DB B47-0C64-4C41-8AF1-4 43319848F1A
While inthe Drive mode, thefollowing itemscan
be set upbypressing theSETUP button.
. Display Brightness
. Button Brightness
. Clock TimeSetting
. Select Language
. Select Units
. Auto Interior Illumination
. Selective Doorunlock
. Auto Headlight Sensitivity (ifso equipped)
. CLIMA TEECO
NO TE:
. The SETUP function cannotbead-
justed whiledriving.
. When thebattery isdisconnected, the
SETUP memory iserased andreverts to
the default settings. Ifnecessary, reset
the SETUP memory afterreconnecting
the
battery.
SIC4617
Setting Display Brightness andButton
Brightness
GUID-27E 9F256-C04 B-4006-9271-055B95871748
1. Press theDrive Mode Select button.
2. Press theSETUP button.
3. Turn theSelection dialtoªDisplay Bright-
nessº orªButton Brightnessº thenpress the
ENTER
button.
SIC4557
4. Turn theSelection dialto+to increase
brightness orto


> (GLW   0RGHO )'@
Clock TimeSetting
GUID-281 2E6D3-793 3-4DFF-89C0 -F87C59706668
NO TE:
Clock TimeSetting isused fordisplaying
the ECO information. SeeªEco informa-
tionº (P.2-27)
.
SIC4558
1. Press theDrive Mode Select button.
2. Press theSETUP button.
3. Turn theSelection dialtoªClock Time
Settingº ,then press theENTER
button.
SIC4559
4. Turn theSelection dialtoselect theday of
the week, thenpress theENTER buttonto
apply theselection.
5. Turn theSelection dialtoselect thehour and
AM orPM, then press theENTER buttonto
apply theselection.
6. Turn theSelection dialtoselect theminutes,
then press theENTER buttontoapply the
selection.
Instrume ntsand controls
2-23
&RQGLWLRQ


> (GLW   0RGHO )'@
NO TE:
When theclock isnot set, theECO
information (dailyandweekly) cannotbe
used.
Reset atStart
GUID-F8522 59B-B08A-4BC8-BAC5-9ACC5A687 EEB
Records ofup tothe past 4times ofeach timeof
ignition switchONfuelconsumption canbe
shown onthe display .
Manual Reset
GUID-B6A6 2823-AFB2-4ADC-A65B -72B63B1719C0
Records ofup tothe past 4times ofresetting
fuel consumption canbeshown onthe display .
The displayed ECOINFO canbereset by
pushing theENTER buttonforlonger than1
second.
GUID-E521 ED90-7BA2-4 FC3-91C7-F35E3C88D AF5
JVI1163X
Y our vehicle hastwo types ofsecurity systems,
as follows:
. Vehicle security system
. NISSAN Vehicle Immobilizer System
The security condition willbeshown bythe
security indicator light.
VEHICLE SECURITY SYSTEM
GUID-B38A 9882-E3CB-4 884-A546-D9C91260 263B
The vehicle security systemprovides visualand
audio alarmsignals ifsomeone opensthedoors,
or lift gate when thesystem isarmed. Itis not,
however, amotion detection typesystem that
activates whenavehicle ismoved orwhen a
vibration occurs.
The system helpsdetervehicle theftbutcannot prevent
it,nor can itprevent thetheft ofinterior
or exterior vehiclecomponents inall situations.
Always secureyourvehicle evenifparking fora
brief period. Neverleaveyourkeys inthe vehicle,
and always lockitwhen unattended. Beaware
of your surroundings, andpark insecure, well-lit
areas whenever possible.
Many devices offeringadditional protection,
such ascomponent locks,identification markers,
and tracking systems, areavailable atauto
supply storesandspecialty shops.Your
NISSAN dealermayalso offer such equipment.
Check withyour insurance companytosee if
you may beeligible fordiscounts forvarious
theft protection features.
Instrume ntsand controls
2-29
SECURITY SY STEMS
&RQGLWLRQ


> (GLW   0RGHO )'@
2-34
Instrument sand controls
GUID-001 3655D-0D8 8-4D9F-87A B-B359910F 5671
WARNING
In freezing temperatures thewasher
solution mayfreeze onthe rear window
glass andobscure yourvision. Warm
the rear window withthedefroster
before youwash therear window.
CAUTION
. Do not operate thewasher continu-
ously formore than30seconds.
. Do not operate thewasher ifthe
reservoir tankisempty.
. Do not fillthe window washer
reservoir tankwithwasher fluid
concentrates atfull strength. Some
methyl alcohol basedwasher fluid
concentrates maypermanently stain
the grille ifspilled whilefilling the
window washerreservoir tank.
. Pre-mix washerfluidconcentrates
with water tothe manufacturer's
recommended levelsbefore pouring
the fluid intothewindow washer
reservoir tank.Donot use the window
washerreservoir tankto
mix thewasher fluidconcentrate
and water.
If the rear window wiperoperation is
interrupted bysnow orice, thewiper may
stop moving toprotect itsmotor. Ifthis
occurs, turnthewiper switch tothe OFF
position andremove thesnow orice that is
on and around thewiper arms.Inapproxi-
mately 1minute, turntheswitch onagain
to operate the wiper.
SIC3666
The rear window wiperandwasher operate
when theignition switchisin the ON position.
T urn theswitch clockwise fromtheOFF position
to operate thewiper.
*
1
Intermittent (INT)Ðintermittent operation(not
adjustable)
*
2
Low (ON) Ðcontinuous lowspeed operation
Push theswitch forward
*
3
to operate the
washer. Thenthewiper willalso operate several
times.
REAR WINDOW WIPERAND
WASHER SWITCH
&RQGLWLRQ


> (GLW   0RGHO )'@
3-18
Pre-driving checksandadjustment s
GUID-00F6 53FB-C04F-403C-85F5 -83A24D309 0E8
SP A2336
OPENING THEFUEL -FILLER DOOR
GUID-232 776DC-41D5 -442C-B49A- 681435FB8699
T o open thefuel-filler door,pulltherelease
handle located belowtheinstrument panel.To
lock, close thefuel-filler doorsecurely
.
SP A2800
FUEL -FILLER CAP
GUID-D78 C472D-DEB1 -43D1-82E6-5180D4CDB920
T o remove thefuel-filler cap:
1. Turn thefuel-filler capcounterclockwise
*
1
to remove.
2. Put thefuel-filler caponthe cap holder
*
A
while refueling.
T o install thefuel-filler cap:
1. Insert thefuel-filler capstraight intothefuel-
filler tube.
2. Turn thefuel-filler capclockwise
*
2
until a
single clickisheard.
WARNING
. Gasoline isextremely flammable
and highly explosive undercertain
conditions. You could beburned or
seriously injuredifitis misused or
mishandled. Alwaysstopengine
and donot smoke orallow open
flames orsparks nearthevehicle
when refueling.
. Do not attempt totop offthe fuel
tank after thefuel pump nozzle
shuts offautomatically. Continued
refueling maycause fueloverflow,
resulting infuel spray andpossibly
a fire.
. Use only anoriginal equipment type
fuel-filler capasareplacement. It
has abuilt-in safetyvalveneeded
for proper operation ofthe fuel
system andemission controlsys-
tem. Anincorrect capcanresult ina
serious malfunction andpossible
injury. Itcould alsocause themal-
function indicator lighttocome on.
. Never pourfuelinto thethrottle
body toattempt tostart yourvehi-
cle.
FUEL -FILLER DOOR
&RQGLWLRQ


> (GLW   0RGHO )'@
Fan speed control:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
T urn thefanspeed control
dial clockwise to
increase thefanspeed.
T urn thefanspeed control
dial counter-
clockwise todecrease thefanspeed.
A/C (AirConditioner) operation:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Push theA/C button toturn onoroff the air
conditioner. Whentheairconditioner ison, the
A/C indicator lightonthe button illuminates.
T emperature control:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
T urn thetemperature controldialtoset the
desired temperature. Turn thedial between the
middle andtheright position toselect thehot
temperature. Turn thedial between themiddle
and theleftposition toselect thecool tempera-
ture.
Heater operation
GUID-C815 0974-E365-4C3D-88F2 -33DCA6CC D2F4
Heating:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
This mode isused todirect heated airtothe foot
outlets.
1. Move theairintake levertothe
position.
2. Turn theairflow control dialtothe
position.
3. Turn thefanspeed control
dial tothe
desired position. 4.
Turn thetemperature controldialtothe
desired position between themiddle andthe
hot (right) position.
V entilation:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
This mode directs outside airtothe side and
center ventilators.
1. Move theairintake levertothe
position.
2. Turn theairflow control dialtothe
position.
3. Turn thefanspeed control
dial tothe
desired position.
Defrosting ordefogging:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
This mode directs theairtothe defroster outlets
to defrost/defog thewindows.
1. Move theairintake levertothe
position.
2. Turn theairflow control dialtothe
position.
3. Turn thefanspeed control
dial tothe
desired position.
4. Turn thetemperature controldialtothe
desired position between themiddle andthe
hot (right) position.
. To remove frostfromtheoutside surface of
the windshield quickly,turn thetemperature
control dialtothe maximum hotposition and
the fanspeed control
dial tothe
maximum position. .
When the
position isselected, theair
conditioner willautomatically turnon.This
will dehumidify theairand help todefog the
windows.
Bi-level heating:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
This mode directs coolairfrom theside and
center ventsandwarm airfrom thefoot outlets.
When thetemperature controldialisturned to
the maximum hotorcool position, theair
between theventilators andthefoot outlets is
the same temperature.
1. Move theairintake levertothe
position.
2. Turn theairflow control dialtothe
position.
3. Turn thefanspeed control
dial tothe
desired position.
4. Turn thetemperature controldialtothe
desired position.
Heating anddefogging:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
This mode heatstheinterior anddefogs the
windows.
1. Move theairintake levertothe
position.
2. Turn theairflow control dialtothe
position.
3. Turn thefanspeed control
dial tothe
desired position.
Heater, airconditione r,audio andphone systems
4-27
&RQGLWLRQ


> (GLW   0RGHO )'@
. Bass, Treble, Balance andFade
Controls thesound ofthe audio system.
Balance adjuststhesound between theleft
and right speakers. Fadeadjusts thesound
between thefront andrear speakers.
Select theªBassº ,ªT rebleº ,ªBalanceº or
ªFadeº usingtheTUNE´FOLDER knob,and
then push theENTER/SETTING button.
T urn theTUNE´FOLDER knobtoadjust the
Bass, Treble, balance andFade ofthe
screen tothe preferred level.
. Speed Sensitive Vol.
T o change theSpeed Sensitive Volume
(Speed Sensitive Vol.) level from off(0) to
5, turn theTUNE´FOLDER knob.
. AUX Vol.
Controls thevolume levelofincoming sound
when anauxiliary deviceisconnected tothe
system. Choose asetting between +1and
+3 orchoose 0to disable thefeature
entirely .
. Brightness andContrast
Adjust thebrightness andcontrast ofthe
screen.
Select ªBrightnessº orªContrastº usingthe
TUNE´FOLDER knobandthen push the
ENTER/SETTING button.Turn the
TUNE´FOLDER knobtoadjust thebright-
ness andcontrast ofthe screen tothe preferred
level.
. Clock Adjust
Adjust theclock according tothe following
procedure.
1) Select ªClock Adjustº usingthe
TUNE´FOLDER knobandthen push
the ENTER/SETTING button.
2) Adjust thehour withtheTUNE´FOLDER
knob andthen push theENTER/
SETTING button.
3) Adjust theminute withthe
TUNE´FOLDER knobandthen push
the ENTER/SETTING button.
24 hour clock isnot available.
. On-Screen Clock
When thisitem isturned on,aclock is
always displayed inthe upper rightcorner of
the screen.
Select theªOn-Screen Clockºusingthe
TUNE´FOLDER knobandthen push the
ENTER/SETTING button.You can toggle
between ONand OFF using the
TUNE´FOLDER knob.
. RDS Display (ifso equipped)
RDS (radio datasystem) information canbe
shown onthe display .Select ªRDSDisplayº
using theTUNE´FOLDER knobandthen
push theENTER/SETTING button.You can
toggle between ONand OFF using the TUNE´FOLDER
knob.
. Language Select
The language settingscanbechanged.
Select ªLanguage Selectºusingthe
TUNE´FOLDER knobandthen push the
ENTER/SETTING button.Usethe
TUNE´FOLDER knobtoselect thepreferred
language.
DISP button:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Display ofthe screen canbecanceled by
pushing the
button. You can stilllisten to
music thatisbeing played backevenwhile the
screen display isturned off.Ifyou want to
display thescreen again,eitherpushthe
button oncemore orpush the
,
,
,
button.
MEDIA button:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Pushing the
button willswitch theaudio
source asfollows:
USB/iP od


> (GLW   0RGHO )'@
4-72
Heater, airconditione r,audio andphone systems
SAA2102
T ype A(if so equipped)
SAA2374
T ype B(if so equipped)
ANTENNA
GUID-2E6 EC723-5024 -4ED7-8C53-2005D6 7806B8
T o remove theantenna, holdthebottom ofthe
antenna andturn itcounterclockwise.
T o install theantenna, turntheantenna clock-
wise andtighten.
CAUTION
. To avoid damaging ordeforming the
antenna, besure tofold down (ifso
equipped) orremove theantenna
under thefollowing conditions.
Ð The vehicle entersagarage with
a low ceiling.
Ð The vehicle iscovered withacar
cover.
. Be sure thatantenna isremoved
before thevehicle entersanauto-
matic carwash.
. Always properly tightentheantenna
rod during installation. Otherwise,
the antenna rodmay break during
vehicle operation.
GUID-EB2 565B8-2F32 -44D1-884B-3 D9157E86821
This vehicle isequipped withSmartphone
Integration technology.This allows manycom-
patible Smartphone applicationstobe displayed
and easily controlled throughthevehicle's
touchscreen.
NO TE:
A compatible smartphone andregistration
is required touse mobile applications orto
access connected featuresofcertain vehi-
cle applications.
REGISTERIN GWITH NISSANCON-
NECT
SM
APP
GUID-09 282224-C8 22-4A6E-B84 1-C70746449602
T o use theSmartphone Integrationfeature,itis
necessary forthe user toregister. Inorder to
register, visittheNissanConnect
SM
website,
www .nissanusa.com/connect/ andsign upor
create anaccount throughtheprompts onthe
NissanConnect
SM
App. Once registered, down-
load theNissanConnect
SM
App from your
compatible phone'sapplication download
source andthen loginto theapplication. Ifyou
already haveanaccount createdthrough the
App, please login.
NISSANCONN ECT
SM
APP
SMARTPHON EINTEGRA TION
&RQGLWLRQ