2015 MITSUBISHI LANCER EVOLUTION MMCS Manual

Guidance Start Screen
57
NAVI Destination Settings
Guidance Start Screen
This is the screen displayed when the location to set as the destination is decided.
This section explains the operations you can do on this screen.
1)
3)5)6)
7)
8)
4)
2)
1) Location information
When such location information as the
“establishment name”, “street name”,
“city name”, “country name”, “latitude”,
“longitude”, or “telephone number” has
been obtained, it is displayed.
2)
Start
The search is executed and route
guidance is started.
3)
Dial
If a mobile phone is connected, you can
call the establishment.
→“Call a Telephone Number Registered
on the Map”(P149)
4) Home
If your home is not registered, you can
register the searched for location as your
home.5)
Show Route
Sets the currently searched for location as
the destination and shows a simple sketch
of the route. You can check the route and
change the search conditions.
→“Show Route”(P57)
6) Itinerary List
You can change the destination, add
waypoints, and change the route search
conditions.
→“Set and Change a Waypoint”(P61)
7) Address Book
Registers the search for location in the
address book.
→“Set an Address in the Address
Book”(P72)
8) Adjust *
You can scroll the map and change the
location.
* When the destination setting is set when scrolling the map,
it is not displayed.
Show Route
This section explains the screen displayed
when you touch [Show Route].
Start
Starts route guidance.
Modify
Displays the Itinerary List screen.
Preview
Scrolls the map along the route.
→“Check the Route”(P58)
Rt.Outline
Displays a list of junctions at
which turns must be made on the
route to the destination.
→“Route Outline”(P60)
4 Routes
Displays the overall route to
check four routes and allows you
to change the search conditions.
→“Select from Four Routes”(P64)
Options
Detailed settings can be set
concerning the route.
→“Change Search
Conditions”(P61)
Info mark
Touching the mark displayed
at “Info” will display a map of
the surroundings and related
information.

58 Route Checking
Route Checking and Changing
Route Checking
If a route has been set, you can check it.
Check the Next Junction to
Tur n
When the route you are traveling has a
junction ahead where you must turn left or
right, you can have audio guidance and
junction guidance map display provided ahead
of time.
ADVICE
• You must be traveling a route.
• For some maps, only audio guidance is
provided.
1On the current location screen,
touch the “junction guidance
icon”.
▼
This displays an expanded map of the junction
to turn next.
Check the Route
You can scroll along the route to check and
check maps of the surroundings.
ADVICE
• During checking, the map type displayed
is One Map 2D (N-up).
• The same operations can also be carried
out on
“Show Route”(P57) by touching
[Preview].
1Press the NAVI MENU key.
This displays the navi menu.
2Touch Route Menu .
3Touch View Route .
4Touch Preview .
5Touch the route “check
method”.
▼
The map changes to match the check method
selected.

Route Checking
59
NAVI Route Checking and Changing
Types of Check Methods
Backward
Scrolls from the destination
toward the start location.
Stop
Stops scrolling for going
backward or forward.
Forward
Scrolls from the start location
toward the destination.
Back
Ends scrolling.
Check the Entire Route
This displays the map at a scale that allows
you to check the route from the start location
to the destination.
1On the current location screen,
touch
▲ .
2Touch Confi rm Route .
3Touch Entire Route .
▼
This displays a map screen showing the entire
route.
Types of Icons on Map
Shows the start location.
Shows the location of your car.
Shows the destination.
Shows the waypoints that have been
set.
Remaining
This displays the map at a scale that can
display all of the route that has not been
traveled yet.
1Press the NAVI MENU key.
This displays the navi menu.
2Touch Route Menu .
3Touch View Route .
4Touch Remaining .
▼
This displays the remaining route.
ADVICE
• When the current location screen is
displayed, you can also perform the same
operations by touching
▲ , [Confi rm
Route], and [Remaining Route].

60 Route Checking
Route Outline
This displays a list of junctions at which turns
must be made on the route to the destination.
1Press the NAVI MENU key.
This displays the navi menu.
2Touch Route Menu .
3Touch View Route .
4Touch Rt.Outline .
▼
This displays a list of junctions at which turns
must be made.
ADVICE
• If you touch one of the junctions in
the list, a map of the area around that
junction is displayed.
View a Demo Trip
You can travel the prepared route virtually to
check.
ADVICE
• Once you have actually driven the route
and arrived at the destination, you cannot
run the demo trip.
1Press the NAVI MENU key.
This displays the navi menu.
2Touch Start Demo .
▼
This displays “Demo” and starts the demo trip.
Ending
1During the demo trip, press the
NAVI MENU key.
This displays the navi menu.
2Touch Stop Demo .
▼
This ends the demo trip.
ADVICE
Besides this operation, the demo trip also
ends if any of the following conditions is
met.
• The trip is actually started.
• The destination or a waypoint is changed.
Or deleted.
• The ignition key is switched to “OFF”.
• A search condition is changed.
• On the itinerary list screen, [Show Route]
is touched.

Change the Route
61
NAVI Route Checking and Changing
Change the Route
A detour route or a different route can be
set for the route currently set. The route
search method can also be changed.
1Press the NAVI MENU key.
This displays the navi menu.
2Touch Route Menu , and then
Itinerary .
▼
This displays the itinerary list.
Change Search Conditions
You can change the route search conditions.
1On the itinerary list screen,
touch
Options .
2Touch the “search condition”
to set.
→“Route Options”(P203)
3Touch Back .
4Touch Start .
▼
The search using the set condition is
complete.
Set and Change a Waypoint
ADVICE
• Set the destination before setting any
waypoint.
• Up to 5 waypoints can be set.
Setting a Waypoint
This section explains the method for setting a
waypoint when none has been set yet.
ADVICE
• You can also set a waypoint from the
scroll menu (P32).
1On the itinerary list screen,
touch
Add .
2Touch any “search method”
and search for the location.
→“Search Method Selection Screen”(P62)
3Touch Itinerary List .
Continued on the next page

62 Change the Route
4Touch Add for the location to
add.
▼
This sets the waypoint and displays the
itinerary list screen (P61).
Search Method Selection
Screen
Address/
IntersectionSearches for a location from an
address. The procedure is the
same as from Step 2 onward in
“Search from Address”(P50).
Point of
InterestThe name of an establishment
can be entered to search for its
location. The procedure is the
same as from Step 2 onward
in
“Search by Inputting an
Establishment Name”(P51).
Advanced
SearchSearches for establishments
near the current location and
destination and near the route.
→“Search for Nearby
Establishments”(P53)
Previous 50
Uses the search history. The
procedure is the same as from
Step 2 onward in
“Use the Search
History”(P50).
Address
Book
*1Loads Address Book. The
procedure is the same as from
Step 2 onward in
“Load from the
Address Book”(P49).
Home*2Loads own home.
Zip Code
Used when you know the zip
code of the location you are
searching for. The procedure is
the same as from Step 2 onward
in
“Search from Zip Code”(P55).
Phone
NumberUsed when you know the
telephone number of the location
you are searching for. The
procedure is the same as from
Step 2 onward in
“Search from
Telephone Number”(P55).
Map Point
The location scrolled to on the
map
(P40) can be set.
Latitude/
LongitudeThe latitude and longitude can be
entered to search for the location.
The procedure is the same as
from Step 2 onward in
“Search by
Latitude and Longitude”(P56).
Return Trip
Loads the start location used for
route setting.
*1 When you set an address in the address book (P72), this
is displayed in the menu.
*2 When you register your home
(P68), this is displayed in
the menu.

Change the Route
63
NAVI Route Checking and Changing
Deleting a Waypoint
Delete a set waypoint.
ADVICE
• Waypoints that you have already passed
cannot be deleted.
1On the itinerary list screen,
touch
Delete .
2Touch the “waypoint” to delete.
Select All
Selects all the registered
items. Touch to delete all.
Clear All
Cancels all the selected
items.
3Touch Done .
4Touch Ye s .
▼
This deletes the waypoint and displays the
itinerary list screen (P61).Operating from a Sub-menu
You can delete the next waypoint you are
scheduled to pass through.
1On the current location screen,
touch
▲ .
2Touch Change Route .
3Touch Clear Transit Route .
▼
This deletes the next waypoint you are
scheduled to pass through and starts the
route search.
ADVICE
• When you have passed through all the
waypoints, [Delete Point] is grayed out
and cannot be selected.
Re-ordering waypoints
The order for reaching the destination and
waypoints is changed.
ADVICE
• Waypoints that you have already passed
through cannot be re-ordered.
1On the itinerary list screen,
touch
Re-order .
2Touch “locations” in the order
that you want to pass through
them.
3Touch Done .
▼
The re-ordering of waypoints is complete and
the itinerary list screen (P61) is displayed.

64 Change the Route
Select from Four Routes
You can simultaneously search for routes with
four different conditions, then select one of
them.
ADVICE
• Depending on the road conditions, it
may not be possible to search for all four
routes.
1On the itinerary list screen,
touch
Show Route
and
4Routes .
2Touch the “search condition”
to set.
The search conditions are the same as for “Route Options”(P203) “Route Priority”.
▼
This displays the route with the changed
search conditions.
Search for a Detour Route
You can search for a route that detours ahead
the distance you specify.
ADVICE
• This operation is not possible if the distance
to the destination is less than 1 km.
1Press the NAVI MENU key.
This displays the navi menu.
2Touch Route Menu , and then
Detour .
3Touch the “distance” to detour.
If you touched [Avoid Street], refer to “Selecting a detouring road”(P64).
▼
The search for the route detouring the set
distance is complete and route guidance
starts.
NOTE
• You can change the distance unit with
[System] [Units].
→“System Settings”(P211)
Selecting a detouring road
Select the street that will be the starting point
and the street that will be the ending point,
then set a route that detours that range.
1Execute up to Step 2 in “Search
for a Detour Route”(P64)
.
2Touch Avoid Street .
3Touch the “street” you want to
set to the starting point.
If you are detouring only one street,
proceed to Step 5.
4Touch the “street” you want to
set to the ending point.
5Touch Set .
▼
The search for the route detouring the
set range of streets is complete and route
guidance starts.