2015 MITSUBISHI L200 lock

Power steering systemE00607400387
The power steering system operates while the
engine is running. It helps reduce the effort needed to turn the steering wheel.
The power steering system has mechanical
steering capability in case the power assist is lost. If the power assist is lost for some rea-
son, you will still be able to steer your vehi-
cle, but you will notice it takes much more effort to steer. If this happens, have your ve-
hicle inspected at an authorized MITSUBISHI MOTORS service point.WARNINGl Do not stop the engine while the vehicle is
moving. Stopping the engine would make
the steering wheel extremely hard to turn, possibly resulting in an accident.CAUTIONl Do not leave the steering wheel turned all
the way in one direction. This can causedamage to the power steering system.Active Stability & Traction
Control (ASTC)* E00616700344
The active stability & traction control (ASTC) takes overall control of the anti-lockbrake system, traction control function and Active Stability Control function to help
maintain the vehicle’s control and traction. Please read this section in conjunction with the page on the anti-lock brake system, trac- tion control function and Active Stability
Control function.

Anti-lock brake system (ABS) ® p. 6-45
Active Traction Control function ® p. 6-49
Active Stability Control function ® p. 6-49CAUTIONl Do not over-rely on the ASTC. This system,
like any other system, has limits and cannot
help you to maintain traction and control of
the vehicle in all circumstances. Reckless
driving may lead to accidents. Always drive carefully, taking into account the traffic,road and environmental conditions.
l Be sure to use the same specified type and
size of tyre on all 4 wheels. Otherwise, the
ASTC may not work correctly.NOTEl After your vehicle is driven a short distance
after starting the engine, a click is heard from the engine compartment; however, this
is only the sound of ASTC being checked.
l Some vibration will be felt in the vehicle
body and a whining sound of a motor will be heard from the engine compartment when the ASTC functions. This is a normal result
of the ASTC operation, and does not indi- cate a malfunction.
l The ASTC does not operate while the ABS
warning lamp is illuminated.
l On vehicles with the rear differential lock,
the ASTC and ABS functions are suspended
while the rear differential lock is activated. ASTC indication lamp, ASTC OFF indica-tion lamp and ABS warning lamp are illumi-
nated while these functions are suspended. It
does not indicate a problem. When the rear differential lock is disengaged, these lamps
go out and function again.
Refer to “ABS warning lamp” on page 6-46,
“ASTC indication lamp, ASTC OFF indica-
tion lamp” on page 6-49.
Power steering system
6-48OKTE15E3Starting and driving6

Driving hints
E00616800039
When extricating the vehicle from mud, sand
or fresh snow, you may find that operation of
the ASTC prevents the engine speed from in-
creasing in response to depression of the ac- celerator pedal. If this happens and the vehi-cle remains stuck as a result, deactivate the
ASC function by pressing the “ASC OFF”
switch. The vehicle will then be easier to ex- tricate. (Brake control of the ATC function isstill working to prevent wheel spins when the
ASC function is deactivated by pressing the “ASC OFF” switch.)
Active Stability Control func-
tion
E00616900115
The Active Stability Control function is de- signed to improve the vehicle’s stability byrestraining its tendency to slip sideways (for
example, when rounding a curve in slippery conditions, or when the driver takes rapid
steering action to avoid an obstacle). It works
by controlling the engine output and brake on each wheel.
NOTEl On vehicles with rear differential locks, the
Active Stability Control function does notoperate when the rear differential lock is ac-
tivated.
“ASC OFF” switch
The Active Stability Control function is auto-
matically activated when the ignition switch
is turned to the “ON” position. You can deac- tivate the system by pressing the “ASC OFF”
switch when the vehicle speed is below 40 km/h (25 mph). To reactivate the Active
Stability Control function, press the ASC OFF switch again. It is strongly recommen-
ded that the Active Stability Control function
normally be kept activated.
Type 1Type 2
NOTEl If the vehicle speed increases to about
120 km/h (74 mph) with the Active Stability Control function deactivated, the Active Sta-bility Control function automatically starts operating. To subsequently stop the Active
Stability Control function, stop the vehicle
and press the ASC OFF switch again.Active Traction Control func-
tion
E00617000025
On slippery surfaces, active traction control function prevents the drive wheels from ex- cessive spinning, thus helping the vehicle to
start moving from a stop. It also provides suf-
ficient driving force and steering perform- ance as the vehicle turns at accelerated
speeds.
CAUTIONl When driving a vehicle on a snowy or icy
road, be sure to install snow tyres and drive the vehicle at moderate speeds.ASTC indication lamp, ASTC
OFF indication lamp
E00617100114
The Active Stability Control function and ac-
tive traction control function share the same indication lamp.
Active Stability & Traction Control (ASTC)*
6-49OKTE15E3Starting and driving6

The indication lamps should illuminate when
the ignition switch is turned to the “ON” po- sition and should go off after a few seconds.
If the indication lamps stay on or do not illu- minate when the ignition switch is turned to
the “ON” position, we recommend you to have your vehicle inspected as soon as possi-ble.
indication lamp blinks when the Active
Stability Control function or active traction
control function is operating.
indication lamp is illuminated when the
Active Stability Control function is OFF.
CAUTIONl When indication lamp blinks, Active Sta-
bility Control function or active traction con- trol function is operating, which means that
the road is slippery or that your vehicle’s wheels are slipping excessively. If this hap-
pens, drive slower with less accelerator in-
put.CAUTIONl If an abnormal condition occurs in the sys-
tem while driving, the indication lamp
will illuminate.
In these cases, follow these procedures:
• If the temperature in the braking system
continues to increase due to continuous brake control on a slippery road surface,
the
indication lamp will illuminate, and
operation of the Active Stability Control function and active traction control func-
tion will be suspended to protect the brake
system. (Normal operation of the vehicle will not be affected.) Park your vehicle in
a safe place. When the temperature in the
braking system has come down, the
in-
dication lamp will go off and the Active
Stability Control function and active trac- tion control function will start operating again.
• If the
indication lamp does not go out
even though the above procedure is fol-
lowed, there could be a problem in the system.
Stop the engine and start the engine again
and check whether the
indication lamp
goes out. If the indication lamp goes out, there is no abnormal condition.
If the
indication lamp illuminates even
after your vehicle is driven a short dis-
tance after restarting the engine, we rec-
ommend you to have your vehicle checked as soon as possible.
CAUTIONl If the vehicle is towed with the ignition
switch in the “ON” position and only the
front wheels or only the rear wheels raised off the ground, the ASTC may operate, re-
sulting in an accident. When towing the ve- hicle with the front wheels raised, keep the
ignition switch in the “LOCK” or “ACC” position. When towing the vehicle with the
rear wheels raised, keep the ignition switch in the “ACC” position.
Refer to “Towing” on page 8-22.Cruise control*
E00609100779
Cruise control is an automatic speed controlsystem that keeps a set speed. It can be acti-vated at about 40 km/h (25 mph) or more.
Cruise control*
6-50OKTE15E3Starting and driving6

NOTElIf the cruise control is on when the ignition
switch is turned to the “LOCK” or “ACC” position, cruise control will be on automati- cally the next time you start the engine.
The “CRUISE” indication lamp will also be
on.
l If the battery voltage is insufficient, the
memory data for the cruise control may be erased.
As a result, the “CRUISE” indication lamp may not come on when you restart the en-
gine.
If this happens, press the “ON OFF” switch once again to turn on the cruise control.
2. Accelerate or decelerate to your desired
speed, then press and release the “COAST SET” switch (B) when the
“CRUISE” indication lamp is illumina- ted. The vehicle will then maintain the
desired speed.
NOTEl When you release the “COAST SET”
switch, the vehicle speed will be set.To increase the set speed
E00609400570
There are 2 ways to increase the set speed.
“ACC RES” switch
Press and hold the “ACC RES” switch (C)while driving at the set speed, and your speed
will then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now set.
To increase your speed in small amounts,
press the “ACC RES” switch for less than about 1 second and release it. Each time youpress the “ACC RES” switch, your vehicle
will go about 1.6 km/h (1 mph) faster.
Accelerator pedal
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then press the “COAST SET” switch (B) and release the switch momentarily to set a new
desired cruising speed.
To decrease the set speed
E00609500500
There are 2 ways to decrease the set speed.
“COAST SET” switch
Press and hold the “COAST SET” switch (B)
while driving at the set speed, and your speed will slow down gradually.
Cruise control*
6-52OKTE15E3Starting and driving6

to resume the previously set speed. In thesesituations, repeat the speed setting procedure:
l The “ON OFF” switch is pressed.
l The ignition switch is turned OFF.
l “CRUISE” indication lamp is turned
OFF.Cargo loads
E00609901123
Cargo loads precautions
CAUTIONlWhen loading luggage, be careful to the fol-
lowing.
• Stow cargo and luggage in the cargo area
whenever possible.
• Distribute cargo or luggage evenly not to
be unbalanced in weight.
• Do not place cargo or luggage on the in-
strument panel.
Also, do not stack up cargo or luggage on the front passenger’s seat or the rear seat.
Having the driver’s vision blocked, and
your cargo being thrown inside the cabin if you suddenly have to brake can cause a
serious accident or injury.Trailer towing
E00610001674
In order to tow a trailer with your vehicle,
when having a trailer towing device mounted that meets all relevant regulations in your
area, consult a MITSUBISHI MOTORS Au-
thorized Service Point.
The regulations concerning the towing of a
trailer may differ from country to country. You are advised to obey the regulations in
each area.CAUTIONl Danger of Accident!
A towing bar should be fitted according to MITSUBISHI MOTORS guidelines.NOTEl If you are going to tow a trailer, pay careful
attention to the following points.
Maximum towable weight with
brake and maximum trailer- nose weight
Never exceed the maximum towable weight
with brake and the maximum trailer-nose weight as listed in the specifications. (Referto “Vehicle weight” on page 11-11.)
If you tow a trailer at an altitude of more than
1,000 m above sea-level, reduce your weight
by 10 % of the gross combination weight for
every increase of 1,000 m above sea-level, as the engine output is lowered owing to de-
crease in atmospheric pressure.
Towing bar mounting specifi-cations
See the following table for fixing points (A) for the towing bar.
Club cab
Cargo loads
6-55OKTE15E3Starting and driving6

Ventilators........................................................................................... 7-02
Heater/Manual air conditioning*........................................................ 7-04 Automatic air conditioning*............................................................... 7-09
Important operation tips for the air conditioning................................ 7-14 Air purifier*........................................................................................ 7-14LW/MW/FM electronic tuning radio with CD player (au- dio system type 1) *........................................................................ 7-15
To play tracks from USB device (audio system type 1) *.................. 7-30
To play tracks from a Bluetooth ®
device (audio system type 1) *..... 7-40
To use the external audio input function (audio system type 1) *...... 7-43
Steering wheel remote control switch (audio system type 1) *.......... 7-44
Error codes (audio system type 1).......................................................7-47 Audio system anti-theft feature (audio system type 1)....................... 7-49
Handling of compact discs (audio system type 1).............................. 7-49
LW/MW/FM radio/CD player (audio system type 2)*.......................7-51
Handling of Discs (audio system type 2)............................................ 7-55
Audio Files (MP3/WMA/AAC) (audio system type 2)...................... 7-56
Important Points on Safety for the Customer (audio system type 2)............................................................................................. 7-60
Operation Keys (audio system type 2)................................................ 7-60
Listen to Radio (audio system type 2)................................................ 7-63
Listen to DAB (audio system type 2) *...............................................7-64
Listen to Traffic Messages (audio system type 2).............................. 7-66
Listen to CDs (audio system type 2)................................................... 7-66
Listen to MP3s (audio system type 2).................................................7-67
Listen to an iPod (audio system type 2).............................................. 7-68
Listen to Audio Files on a USB Device (audio system type 2).......... 7-70
Listen to Bluetooth Audio (audio system type 2) *............................ 7-72
Use AUX (audio system type 2) *...................................................... 7-74Display Indicator (audio system type 2)............................................. 7-75
Audio Quality and Volume Balance Adjustment (audio system type 2)................................................................................. 7-75
System Settings (audio system type 2)............................................... 7-76 Troubleshooting (audio system type 2)...............................................7-80
Antenna............................................................................................... 7-83 Link System*...................................................................................... 7-84
Bluetooth ®
2.0 interface......................................................................7-84
USB input terminal*......................................................................... 7-103
Sun visors.......................................................................................... 7-106 Vanity mirror*...................................................................................7-107Ashtray.............................................................................................. 7-107Cigarette lighter.................................................................................7-108
Accessory socket*............................................................................. 7-109
Digital clock*.................................................................................... 7-109
Interior lamps.................................................................................... 7-110
Storage spaces................................................................................... 7-112
Cup holder*....................................................................................... 7-115
Bottle holder......................................................................................7-115
Convenient hook............................................................................... 7-116
Coat hook*........................................................................................ 7-116
First-aid kit and warning triangle securing bands*........................... 7-117For pleasant driving
OKTE15E37

Demister position
Air flows mainly to the windscreen and thedoor windows.
Heater/Manual air
conditioning* E00700500410
The heater/air conditioning can only be usedwhile the engine is running.
Control panel
E00700600512
1- Mode selection dial
2- Rear window demister switch ® p. 5-43
3- Blower speed selection dial
4- Air conditioning switch*
5- Temperature control dial
6- Air selection lever
Blower speed selection dial
E00700700119
Select the blower speed by turning the blower
speed selection dial clockwise or anticlock- wise.
The blower speed will gradually increase as
the dial is turned to the right.
When the blower speed selection dial is set to the “OFF” position, all fan-driven airflow
will stop.
Heater/Manual air conditioning*
7-04OKTE15E3For pleasant driving7 LHD RHD

Temperature control dial
E00700900209
Turn the temperature control dial clockwise
to make the air warmer. Turn it anticlockwise
to make the air cooler.NOTEl While the engine coolant temperature is low,
the temperature of the air from the heaterwill be cool/cold until the engine warms up, even if you have selected warm air with the
dial.Mode selection dial
E00701100266
To change the position and amount of air
flowing from the ventilators, turn the mode
selection dial. (Refer to “Changing the mode selection” on page 7-02.)
Air selection lever
E00701300460
To change the air selection, use the air selec-
tion lever.
l “
” Outside air
Outside air is introduced into the passen-
ger compartment.
l “
” Recirculated air
Air is recirculated inside the passenger
compartment.
Heater/Manual air conditioning*
7-05OKTE15E3For pleasant driving7 LHD RHD