2015 Citroen C4 warning

166
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Starting-switching off the engine with the 
" Keyless   Entry   and   Starting"   system
Starting the engine
F Place  the   gear   selector   lever   at   N for
vehicles   with   an   electronic   gearbox,   P or N
with
  an   automatic   gearbox,   or   neutral   with  
a m

anual
 g
earbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle  
(

it   is   not   necessary   to   put   it   in   the   reader),  
p

ress   the   brake   pedal   for   vehicles   with  
a

n   electronic   or   automatic   gearbox,   or  
f

ully   declutch   for   vehicles   with   a   manual  
g

earbox. F
b
r
iefly press the "
START/STOP"
button.
 T
he   steering   column   unlocks  
a

nd   the   engine   starts   more   or  
l

ess   instantly   (see   the   advice   for  
D

iesel
 v
ersions).
If   this   warning   lamp   comes   on   after  
p

ressing   "START/STOP",   you   should  
h

old   the   brake   or   clutch   pedal   down  
u

ntil   the   warning   lamp   goes   off   and  
d

o   not   press   the   START/STOP   button  
ag

ain.
If
  one   of   the   starting   conditions   is   not
 m
et,   a   reminder   message   appears   in t
he   instrument   panel   screen.   In   some c

ircumstances,   it   is   necessary   to   turn
 t

he   steering   wheel   slightly   while   pressing
 t

he   "START/STOP"   button   to   assist
 u

nlocking   of   the   steering;   a   message
 w

arns   you   when   this   is   needed.If
  the   electronic   key   is   not   detected   in  
t

he   zone,   a   message   is   displayed.   Move  
t

he   electronic   key   into   the   zone   so   that  
t

he   engine   can   be   started.
The presence of the "
ke
yless Entry and
Starting"
  system   electronic   key   in   the  
r

ecognition   zone   is   essential.
For safety reasons, do not leave this
zone
  with   the   vehicle   running.For Diesel vehicles
, in
temperatures   below   zero   the  e
ngine   will   not   start   until   the  
p

reheater   warning   lamp   has  
g

one   off.
driving

170
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Electric parking brake
The electric parking brake has two operating modes:
-

A
utomatic Application/Release
 A

pplication   is   automatic   when   the   engine  
s

tops,   release   is   automatic   on   use   of   the  
a

ccelerator   (activated   by   default),
-

M
anual Application/Release
 T

he   parking   brake   can   be   applied   /  
r

eleased   manually   by   pulling   control  
l

ever

A.
If
  this   warning   lamp   comes   on   in  
t

he   instrument   panel,   the   automatic  
m

ode   is   deactivated.Programming the mode
Depending on  t he  c ountry  o f  s ale  o f  t he  v ehicle,  t
he   automatic   application   when   the   engine   is  
s

witched   off   and   the   automatic   release   when  
y

ou   press   the   accelerator   can   be   deactivated.
Activation
  /   deactivation   is   done  
u

sing   the   vehicle   configuration  
m

enu;   refer   to   the   section   covering  
t

he   configuration   of   your   vehicle's  
s

ystems.
The
  parking   brake   is   then   applied   and   released  
m

anually.   When   the   driver's   door   is   opened,  
t

here   is   an   audible   signal   and   a   message   is  
d

isplayed   if   the   brake   is   not   applied. It
  is   recommended   that   you   do   not  a
pply   the   parking   brake   in   very   cold  c
onditions   (ice)   and   during   towing  
(

breakdown,   caravan...).   Deactivate   the  
a

utomatic   functions   and   release   the  
par

king
 b
rake
 m
anually.
Do
  not   place   any   object   (packet   of  
c

igarettes,   telephone...)   between   the  
g

ear   lever   and   the   electric   parking  
b

rake   control   lever.
driving

171
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
With the vehicle stationary, to apply the parking brake   whether   the   engine   is   running   or   off,   pull
control lever A .
The
  application   of   the   parking   brake   is  
c

onfirmed   by:
-
 i

llumination
 o
f
 t
he
 b
raking
 w
arning
 l

amp   and   of   the   P
 
warning   lamp   in
 t

he control lever A ,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
When
  the   driver’s   door   is   opened   with   the  
e

ngine   running,   a   message   is   displayed  
a

ccompanied   by   an   audible   signal   if   the   parking  
b

rake   has   not   been   applied,   except   in   the   case  
o

f   an   automatic   gearbox   with   the   gear   lever   in  
p

osition P .
Before
  leaving   the   vehicle,   ensure
 t

hat   parking   brake   warning   lamp   in   the
 i

nstrument   panel   is   on   fixed,   not   flashing.
Manual applicationManual release
The full application of the parking brake is c
onfirmed   by:
-
 
t
he   braking   warning   lamp   and  
t

he P   warning   lamp   in   the   control  
l

ever A   going   off,
-
 
d
isplay   of   the   message   "Parking  
b

rake   off ".
If you pull control lever A  without   pressing t
he   brake   pedal,   the   parking   brake   will n

ot   be   released   and   a   warning   lamp   will
 c

ome   on   in   the   instrument   panel.
With the ignition on or the engine running, to release   the   parking   brake,   press on the brake
pedal or the accelerator, pull then release
control A . If
  necessary,   you   can   make   a   maximum
application
 
of   the   parking   brake.   This   is  
o

btained
 by m
eans
 o
f
 a long
pull
on the control
lever A ,   until   you   see   the   message   "Parking  
b

rake   on   maximum"   and   a   beep   is   heard.
In   the   case   of   towing,   a   loaded   vehicle   or  
p

arking   on   a   gradient,   make   a   maximum  
a

pplication   of   the   parking   brake   then   turn   the  
f

ront   wheels   towards   the   pavement   and   engage  
a

  gear   when   you   park.
After
  a   maximum   application,   the   release   time  
w

ill   be   longer.
Maximum application
Maximum application is essential:
- i n   the   case   of   a   vehicle   towing   a   caravan  
o

r   a   trailer,   if   the   automatic   functions   are  
a

ctivated   but   you   are   applying   the   parking  
b

rake
 m
anually,
-
 
w
hen   the   gradient   you   are   parked   on   may  
v

ary   (e.g.   on   a   ferry,   on   a   lorry,   during  
tow

ing).
9
Driving

172
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automatic release
Full release of the parking brake is 
c onfirmed   by:
-
 
t
he   braking   warning   lamp   and  
t

he P   warning   lamp   in   the   control  
l

ever A   going   off,
-
 
d
isplay   of   the   message   "Parking  
b

rake   off ".
Automatic application,
engine off
- illumination of t he b raking w arning l
amp   and   of   the   P  warning   lamp   in t

he control lever A ,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
The
 
application   of   the   parking   brake   is  
c

onfirmed   by:
With
 
the
 
vehicle   stationary,   the   parking   brake  
i

s automatically applied when the engine is
switched off .
Before   leaving   the   vehicle,   ensure  
t

hat   parking   brake   warning   lamp   in  
t

he
  instrument   panel   is   on   fixed   (not  
f

lashing).
ne

ver leave a child alone inside the
vehicle
  with   the   ignition   on,   as   they  
c

ould   release   the   parking   brake.
When stationary, with the engine running, do not press the accelerator pedal unnecessarily,
as
  you   may   release   the   parking   brake.
In the case of towing, a loaded vehicle or   parking   on   a   gradient,   turn   the   front  
w

heels   towards   the   pavement   and  
e

ngage   a   gear   when   you   park.The
  electric   parking   brake   releases
automatically and progressively when you
press
  the   accelerator:
F

M
anual gearbox: press down fully on the
clutch
  pedal,   engage   first   gear   or   reverse,  
p

ress   on   the   accelerator   pedal   and   move  
o

f f.
F

E
lectronic gearbox: select position A, M
or R
  then   press   on   the   accelerator   pedal.
F

A
utomatic gearbox: select position D, M
or R
  then   press   the   accelerator   pedal.
Driving

173
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Immobilising the vehicle,
engine running
- illumination  of   the   braking  w
arning   lamp   and   the   P   warning  
l

amp   in   the   control   lever   A,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
Particular situations
In certain situations (e.g. starting the engine), the   parking   brake   can   automatically   alter   its  
f

orce.   This   is   normal   operation.
To
  advance   your   vehicle   a   few   centimetres  
w

ithout   starting   the   engine,   but   with   the   ignition  
o

n,   press   on   the   brake   pedal   and   release   the  
p

arking   brake   by pulling then releasing the
control lever A .
  The   full   release   of   the   parking  
b

rake   is   confirmed   by   the   warning   lamps   in  
t

he control lever A   and   in   the   instrument   panel  
g

oing   off   and   display   of   the   message   "Parking  
b

rake   off ".
When
 
the
 
driver’s
 
door
 
is
 
opened,
 
a
 
message
 
is
 
d

isplayed
 
accompanied
 
by
 
an
 
audible
 
signal,
 
if
 
t

he
 
parking
 
brake
 
has
 
not
 
been
 
applied,
 
except
 
i

n
 
the
 
case
 
of
 
an
 
automatic
 
gearbox
 
with
 
the
 
g

ear
 
lever
 
in
 
position
 
P .
The
 
application
 
of
 
the
 
parking
 
brake
 
is
 
c

onfirmed
 
by:
With
 
the
 
engine
 
running
 
and
 
the
 
vehicle
 s
tationary,
 
in
 
order
 
to
 
immobilise
 
the
 
vehicle
 
i

t is essential to manually
 

apply
 
the
 
parking
 
b

rake
 
by
 
pulling control lever A .
Before
 
leaving
 
the
 
vehicle,
 
ensure
 t

hat
 
parking
 
brake
 
warning
 
lamp
 
in
 
the
 i

nstrument
 
panel
 
is
 
on
 
fixed,
 
not
 
flashing.
9
Driving

174
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Emergency braking
In the event of failure of the electronic
stability  control   system,   signalled   by t

he   illumination   of   this   warning   lamp,
 b

raking   stability   is   then   not   guaranteed.
In
 
the
 
event
 
of
 
a
 
failure
 
of
 
the
 
main
 
service
 
b

rake
 
or
 
in
 
an
 
exceptional
 
situation
 
(e.g.
 
driver
 
t

aken
 
ill,
 
under
 
instruction,
 
etc)
 
a
 
continuous
 
p

ull on the control lever A
 
will
 
stop
 
the
 
vehicle.
The electronic stability control provides stability
during
 em

ergency
 b

raking.
If
 
the
 
emergency
 
braking
 
malfunctions,
 
t

he
 
message
 
"Parking
 
brake
 
faulty"
 
will
 
be
 
d

isplayed. The
  emergency   braking   must   only   be  
us

ed
 in e
xceptional
 c
ircumstances.
In
 
this
 
event,   stability   must   be   assured   by   the  
d

river
 
by
 
repeating   alternate   "pull-release"  
a

ctions on the control lever A .
Driving

175
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Operating faults
If the electric parking brake malfunction warning lamp comes on together with one or more of the warning lamps presented in these tables, place the vehicle   in   a   safe   condition   (on   level   ground,   gear   engaged)   and   contact   a   CITROËN   dealer   or   a   qualified   workshop   without   delay.
Situations Consequences
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
T
he   automatic   functions   are   deactivated.
-
 
H
ill   start   assist   is   not   available.
-
 
T
he   electric   parking   brake   can   only   be   used   manually.
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
M
anual   release   of   the   electric   parking   brake   is   only   available   by   pressing  
t

he   accelerator   pedal   and   releasing   the   control.
-
 
H
ill   start   assist   is   not   available.
-
 
T
he   automatic   functions   and   the   manual   application   are   still   available.
Display
  of   the   message   "Parking brake fault "
  and   of   the   following  
w

arning
 lam
ps: -
 
T
he   automatic   functions   are   deactivated.
-
 
H
ill   start   assist   is   not   available.
9
Driving

176
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
SituationsConsequences
To   apply   the   electric   parking   brake:
F
 
i
mmobilise   the   vehicle   and   switch   off   the   ignition.
F
 
p
ull   the   control   for   at   least   5   seconds   or   until   application   is   complete.
F
 
s
witch   on   the   ignition   and   check   the   switching   on   of   the   electric   parking  
b

rake   warning   lamps.
The
  application   is   slower   than   during   normal   operation.
To
  release   the   electric   parking   brake:
F
 
s
witch   on   the   ignition.
F
 
p
ull   the   control   and   hold   it   for   approximately   3   seconds   then   release   it.
If
  the   braking   warning   lamp   is   flashing   or   if   the   warning   lamps   do   not   come  
o

n   with   the   ignition   on,   these   procedures   will   not   work.   Place   the   vehicle  
o

n   level   ground   and   have   it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
and possibly
flashing
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the   following  
w

arning
 lam

ps: -
 
O
nly   the   automatic   application   on   switching   off   the   engine   and   automatic  
r

elease   on   acceleration   functions   are   available.
-
 
T
he   manual   application/release   of   the   electric   parking   brake   and   the  
e

mergency   braking   are   not   available.
and possibly
flashing
Battery
 
fault: -
 I

f   the   battery   warning   lamp   comes   on   you   must   stop   immediately   as   soon   as
 t

he   traffic   allows.   Stop   and   immobilise   your   vehicle   (if   necessary,   place   the
 t

wo   chocks   under   the   wheels).
-
 
A
pply   the   electric   parking   brake   before   switching   off   the   engine.
Driving