2015 Citroen C4 warning

177
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Manual parking brake
Applying
F Pull  the   parking   brake   lever   fully   up   to  i
mmobilise   your   vehicle.
Releasing
F Pull  the   parking   brake   lever   up   gently,  p
ress the release button then lower the
lever
 f

ully.
When the vehicle is being driven, if this warning   lamp   and   the   STOP w arning lam p c

ome   on,   accompanied   by   an   audible
 s

ignal   and   a   message   in   the   multifunction
 s

creen,   this   indicates   that   the   parking   brake
 i

s   still   on   or   has   not   been   properly   released.
When parking on a slope, direct your wheels   against   the   kerb,
apply
  the   parking   brake,   engage   a   gear  
a

nd   switch   off   the   ignition.
9
Driving

180
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Displays in the instrument panel
Gear lever positions
N. neutral
R.
R everse
1, 2, 3, 4, 5, 6.
 
G
ears   in   sequential   mode.
AUTO.
  

 
T
his   comes   on   when   the   automated  
m

ode   is   selected.   It   switches   off   on  
c

hanging   to   sequential   mode.F

Sel
ect position N
.
F  
P
ress   the   brake   pedal   down   fully.
F  
S
tart   the   engine.
Moving off
F Select
  automated   mode   (position   A)   or  s
equential   mode   (position   M)
  or   reverse  
(

position
 R).
F

 
R
elease   the   parking   brake   unless   it   is  
p

rogrammed   to   automatic   mode.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
F
 
A
ccelerate   away.
AUTO and 1, 1 or R
  appear   in   the   instrument  
p

anel
 sc
reen.
N
 
appears
 
in
 
the
 
instrument
 
panel
 
sc

reen.
You
  must   press   the   brake   pedal   when  
s

tarting   the   engine.
Engagement
 
of
 
reverse
 
gear
 
is
 
a

ccompanied
 
by
 
an
 
audible
 
signal. If
 
the
 
engine
 
does
 
not
 
start:
-

If N
 
is
 
flashing
 
in
 
the
 
instrument
 
p

anel,
 
move
 
the
 
gear
 
lever
 
to
 
p

osition A , then to position N .
-

I

f the "Foot on
brake"  warning
 
lamp
 
c

omes
 
on,
 
accompanied
 
b

y
 
an
 
audible
 
signal
 
and
 
t

he
 
display
 
of
 
a
 
message,
 
p

ress
 
the
 
brake
 
pedal
 
f

i r m l y.
Driving

187
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
When the ignition is on, the lighting   of   this   warning   lamp,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   in   the   multifunction  
s

creen,   indicates   a   gearbox  
m

alfunction.
Operating fault
You risk damaging the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f  
y
ou  
f
orce  
t
he  
l
ever  
f
rom  
p
osition P
to another position when the
battery
  is   flat.
To
  reduce   fuel   consumption   when  
s

tationary   for   long   periods   with   the  
e

ngine   running   (traffic   jam...),   position  
t

he   gear   lever   at   N and apply the
parking
  brake,   unless   it   is   programmed  
i

n   automatic   mode.
In
 
this
 
case,
 
the
 
gearbox
 
switches
 
to
 
back-up
 
m

ode
 
and
 
is
 
locked
 
in
 
3rd
 
gear.
 
You
 
may
 
feel
 
a

 
substantial
 
knock
 
when
 
changing
 
from
 
P
to R
 
and
 
from
 
N to R .
 
This
 
will
 
not
 
cause
 
any
 
d

amage
 
to
 
the
 
gearbox.
Do
 
not
 
exceed
 
60
 
mph
 
(100
 
km/h),
 
local
 
speed
 
r

estrictions
 p

ermitting.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
This
 
warning
 
lamp
 
may
 
also
 
come
 
on
 
if
 
a
 
door
 
i

s
 ope

ned.
9
Driving

188
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Hill start assist
On an ascending slope, with the vehicle
stationar y, the vehicle is held for a brief
moment when you release the brake pedal:
- 
i
f   you   are   in   first   gear   or   neutral   with   a  
m

anual
 g
earbox,
-

i
f you are in position A or M with an
electronic
 ge

arbox,
-

i
f you are in position D or M with an
automatic
  gearbox.
Operation
On a descending slope, with the vehicle
stationary and reverse gear engaged, the
vehicle is held for a brief moment when you
release the brake pedal.
Operating fault
If a fault occurs with the system, these warning lamps   come   on.   Contact   a   CITROËN   dealer  
o

r   a   qualified   workshop   to   have   the   system  
c

hecked.
System
 
which
 
keeps
 
your
 
vehicle
 
immobilised
 
t

emporarily
 
(approximately
 
2
 
seconds)
 
when
 
s

tarting
 
on
 
a
 
gradient,
 
the
 
time
 
it
 
takes
 
to
 
m

ove
 
your
 
foot
 
from
 
the
 
brake
 
pedal
 
to
 
the
 
a

ccelerator
 ped

al.
This
 
function
 
is
 
only
 
active
 
when:
-
 
t

he
 
vehicle
 
is
 
completely
 
stationary,
 
with
 
y

our
 
foot
 
on
 
the
 
brake
 
pedal,
-
 
w

hen
 
certain
 
conditions
 
of
 
gradient
 
are
 
m

et,
-
 
w

ith
 
the
 
driver’s
 
door
 
closed.
The hill start assist function cannot be
deactivated.
Do
 
not
 
leave
 
the
 
vehicle
 
while
 
it
 
is
 
being
 
h

eld
 
in
 
the
 
hill
 
start
 
assist
 
phase.
If you need to leave the vehicle while
the
 
engine
 
is
 
running,
 
apply
 
the
 
parking
 b
rake
 
manually
 
then
 
ensure
 
that
 
the
 p
arking
 
brake
 
warning
 
lamp
 
is
 
on
 
(not
 
f

lashing)
 
in
 
the
 
instrument
 
panel.
driving

191
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
The flashing and then fixed illumination   of   the   under-inflation w

arning   lamp   accompanied   by   the
 i

llumination   of   the   service   warning
 l

amp   indicates   a   fault   with   the   system.
Operating fault
The aler t  is  given  by  the  fixed  illumination o
f   this   warning   lamp,   accompanied   by a

n   audible   signal,   and   depending   on
 e

quipment,   the   display   of   a   message.
Under-inflation alert
In the event of a problem on one of the tyres, the   symbol   or   the   message   appears,   according  
t

o   equipment,   to   identify   it.
F
 
R
educe   speed,   avoid   sudden   steering  
m

ovements   or   harsh   brake   applications.
F
 
S
top   as   soon   as   it   is   safe   to   do   so. In
  this   case,   monitoring   of   the   tyre   pressures   is  
n

ot   assured.
F  
I
f   you   have   a   compressor   (the   one   in   the  
t

emporary   puncture   repair   kit   for   example),  
c

heck   the   four   tyre   pressures   when   cold.
 I

f   it   is   not   possible   to   check   the   tyre  
p

ressures   at   the   time,   drive   carefully   at  
r

educed
 s
peed.


or
F
I
n the event of a puncture, use the
temporary   puncture   repair   kit   or   the   spare  
w

heel   (according   to   equipment).
Go   to   a   CITROËN   dealer   or   a   qualified  w
orkshop to   have   the   system   checked   or,  
f

ollowing   the   repair   of   a   puncture,   to   have   the  
o

riginal   wheel,   equipped   with   a   sensor,   refitted.
Any
  tyre   repair   or   replacement   on   a   wheel  
f

itted   with   this   system   must   be   carried   out   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
If
  after   changing   a   tyre,   a   wheel   is   not   detected  
b

y   your   vehicle   (fitting   snow   tyres   for   example),  
y

ou   must   have   the   system   reinitialised   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
The loss of pressure detected does not
always
  lead   to   visible   deformation   of   the  
t

yre.   Do   not   rely   on   just   a   visual   check.This alert is also displayed when one or
more
  wheels   is   not   fitted   with   a   sensor  
(

for   example,   a   space-saver   or   steel  
spar

e
 w
heel).
The   alert   is   maintained   until   the   tyre   or  t
yres concerned is reinflated, repaired
or
  replaced.
The
  spare   wheel   (space-saver   type   or   a  
s

teel   rim)   does   not   have   a   sensor.
9
Driving

192
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , at speeds below
12
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   Diesel  
v

ersions,   when   you   put   the   gear   lever   into  
n

eutral and release the clutch pedal,
If your vehicle is fitted with the
system,
  a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-

w

ith an electronic gearbox , at a speed
below
  5   mph   (8   km/h),   when   you   press  
t

he
 
brake   pedal   or   put   the   gear   lever   into  
p

osition N .
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "   START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes for a few seconds, then
goes
  off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).  
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place   instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
With
 
an
 
electronic
 
gearbox,
 
for
 
your
 
c

omfort
 
during
 
parking
 
manoeuvres,
 
S

TOP
 
mode
 
is
 
not
 
available
 
for
 
a
 
few
 
s

econds
 
after
 
coming
 
out
 
of
 
reverse
 
g

e a r.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
driving

193
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Deactivation
Going into engine START mode
At any time, press the "ECO OFF" switch to
d eactivate   the   system.
This
  is   confirmed   by   the   switch   warning   lamp  
c

oming   on   accompanied   by   the   display   of   a  
m

essage.
Special cases: START invoked
automatically
The "ECO"  warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-

w

ith a manual gearbox , when you fully
depress the clutch pedal,
-

w

ith an electronic gearbox :
●
 
g

ear   lever   in   position   A or M, when you
release
  the   brake   pedal,
●
 
o

r
 
gear   lever   in   position   N   and   the   brake  
p

edal   released,   when   you   move   the   gear  
l

ever to position A or M ,
●
 
o

r
 
when   you   engage   reverse   gear.For
  safety   reasons   or   to   ensure   smooth  o
peration,   START   mode   is   invoked  
a

utomatically
 w
hen:
-
 
y
ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   15 mph  
(

25   km/h)   with   a   manual   gearbox   (3 km/h  
(

2   mph)   with   PureTech   130   petrol   and  
B

lueHDi   Diesel   versions)   or   7   mph  
(

11 km/h)   with   an   electronic   gearbox,
-
 
t
he   electric   parking   brake   is   being   applied,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case the "ECO"
 

warning   lamp  
f

lashes for few seconds, then
goes
  off.
This operation is perfectly normal.
With
  a   manual   gearbox   in   STOP   mode,  
i

f
 
a
  gear   is   engaged   without   fully  
d

epressing   the   clutch   pedal,   a   warning  
l

amp   comes   on   or   an   alert   message  
i

s
 
displayed   asking   you   to   depress   the  
c

lutch   pedal   to   restart   the   engine. If
  the   system   has   been   deactivated  
i

n   STOP   mode,   the   engine   restarts  
i

mmediately.
9
Driving

194
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Maintenance
In the event of a malfunction with the system, the "ECO OFF"   switch   warning   lamp   flashes,  
t

hen   comes   on   continuously.
Ha

ve   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault
This system requires a specific battery with a special   specification   and   technology   (reference  
n

umbers   available   from   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop).
Fitting
  a   battery   not   listed   by  
C

ITROËN introduces   the   risk   of   malfunction   of  
t

he   system.Before
  doing   anything   under   the  
b

onnet, deactivate the Stop & Start
system   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
The   Stop   &   Start   system   makes   use  
o

f   advanced   technology.   All   work   on  
t

his   type   of   battery   must   be   done   only  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In
 
the
 
event
 
of
 
a
 
fault
 
in
 
STOP
 
mode,
 
the
 v

ehicle
 
may
 
stall.
 
All
 
of
 
the
 
instrument
 p

anel
 
warning
 
lamps
 
come
 
on.
Depending
 
on
 
version,
 
an
 
alert
 
m

essage
 
may
 
also
 
be
 
displayed
 
asking
 
y

ou
 
to
 
put
 
the
 
gear
 
lever
 
into
 
position
 
N
and
 
put
 
your
 
foot
 
on
 
the
 
brake
 
pedal.
It is then necessary to switch off the
ignition,
 
then
 
restart
 
the
 
engine
 
using
 
t

he
 
key
 
or
 
the
 
"START/STOP"
 
button.
Reactivation
The system is reactivated automatically a t   every   new   start   using   the   key   or   the  
"

START/STOP"   button.
Press the "ECO OFF"
  switch   again.
The
 
system   is   active   again;   this   is   confirmed  
b

y
 
the
  switch   warning   lamp   going   off   and   the  
d

isplay   of   a   message.
Driving