2015 Citroen C4 change time

10
C4-2_en_Chap00c_eco-conduite_ed01-2015
C4-2_en_Chap00c_eco-conduite_ed01-2015
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
With
  an   automatic   or   electronic   gearbox,   give   preference   to   automatic  
m

ode   and   avoid   pressing   the   accelerator   pedal   heavily   or   suddenly.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and   CO
2
emissions
 
and
 
also
 
helps
 
reduce
 
the
 
background
 
traffic
 
noise.
If
 
your
 
vehicle
 
has
 
cruise
 
control,
 
make
 
use
 
of
 
the
 
system
 
at
 
speeds
 
a

bove
 
25
 
mph
 
(40
 
km/h)
 
when
 
the
 
traffic
 
is
 
flowing
 
well.
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it b y   opening   the   windows   and   air   vents   before   using   the   air   conditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents
 ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the
 t

emperature   in   the   passenger   compartment   down   (sunroof   and   window
 b

linds...).
Switch
  off   the   air   conditioning,   unless   it   has   automatic   regulation,   as
 s

oon   as   the   desired   temperature   is   attained.
Switch
  off   the   demisting   and   defrosting   controls,   if   not   automatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   front   foglamps   when   the   level   of   light  
d

oes   not   require   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  
c

onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect
  your   portable   devices   before   leaving   the   vehicle.
Eco-driving
The gear shift indicator invites you engage the most suitable gear: as soon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
For
  vehicles   fitted   with   an   electronic   or   automatic   gearbox,   this  
i

ndicator   appears   only   in   manual   mode.
Eco-driving

34
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Setting the time and the time
format in the instrument
panel with the clock
On the type 1 instrument panel (without audio system),   to   adjust   the   time,   use   buttons   A and
B
  then   carry   out   the   operations   in   the   following  
o

rder:
F

p
ress buttons A and B  
s
imultaneously:
 t
he
 m

inutes
 f
lash,
F
press A
  to   increase   the   minutes   or   B to
reduce
  the   minutes,
F

p
ress buttons A and B  
s
imultaneously:
 t
he
 h

ours flash,
F
press A to increase the hours or B to
reduce the hours,
F

p
ress buttons A and B  
s
imultaneously:
 
2

4 H or 12 H is displayed and flashes, After
  approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.On
  the   type   1   instrument   panel   (without   audio  
s

ystem),   to   change   the   display   units,   use  
b

uttons A and B then carry out the operations
in   the   following   order:
F
p
ress buttons A and B  
s
imultaneously
 fo
r
 t

hree   seconds:   km/h   or   mph   flashes,
F
p
ress button A or B   to   change   the   units,
F
p
ress buttons A and B   simultaneously   to  
e

xit   from   setting   units.
After   approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.
Setting units in the instrument
panel with the clock
Setting the time and units
in the multifunction screen
The other instrument panels are associated w
ith   an   audio   system   and   a   multifunction  
s

creen.   Refer   to   the   corresponding   screens.
F

p

ress button A or B
 
to
 
change
 
the
 
format,
F

p

ress buttons A and B
 
simultaneously
 
to
 
e

xit
 
from
 
time
 
setting.
Monitoring

35
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Permits manual adjustment of the brightness of the   instruments   and   controls   to   suit   the   ambient  
l

ight   level.   Only   operates   when   the   vehicle  
l

ighting   is   on   in   night   mode.
Lighting dimmer
Activation
F Press  this   button   to   change   the   brightness  o
f   the   instruments   and   controls.
F
 
W
hen   the   lighting   reaches   the   minimum  
s

etting,   release   this   button,   then   press  
a

gain   to   increase   it.
or
F
 
W
hen   the   lighting   reaches   the   maximum  
s

etting,   release   this   button,   then   press  
a

gain   to   reduce   it.
F
 
W
hen   the   lighting   reaches   the   level   of  
b

rightness   required,   release   this   button.
Deactivation
When the vehicle lighting is off, or in day mode (daytime  running  lamps  on),  pressing  the  button d

oes   not   have   any   effect.
This
 
indicator
 
and
 
the
 
lighting
 
v

alue
 
appear
 
in
 
the
 
middle
 
of
 
the
 
i

nstrument
 
panel
 
during
 
adjustment
 
t

o
 
show
 
the
 
setting
 
from
 
the
 
16
 
levels
 
a

vailable.
1
Monitoring

37
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Monochrome screen A
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-

c
urrent audio source,
-
 
t
rip   computer   (refer   to   the   corresponding  
s

ection),
-
 
a
lert   messages,
-
 
s
ettings   menus   for   the   screen   and   the  
v

ehicle
 e
quipment. From
  the   control   panel   of   your   audio   system,  
y

ou   can   press:
F
the "MENU" button for access to the main
menu ,
F

t
he "5" or " 6"
  buttons   to   scroll   through   the  
i

tems   on   the   screen,
F

t
he "7" or " 8"
  buttons   to   change   a   setting  
va

lue,
F
button A
  to   change   the   permanent  
a

pplication   (trip   computer,   audio   source...),
F
the "OK"
 

button   to   confirm,


or
F
the "Back" button to abandon the
operation
  in   progress.
Controls
F Press the "MENU" button for access to
the main menu , then press the " 5" or
" 6 "
  buttons   to   scroll   through   the   various  
m

enus:
-


" R
a
d
Io"
,
-


" M E
dIa
",
-
 
"
TRIP   COMPUTER",
-

"d
a
T
E and TIME",
-
 
"
LANGUAGES",
-

"
VEHICLE P
aRaM
",
F

P
ress the "OK"
 
button   to   select   the   menu  
r

equired.
Main menu
Radio / Media
With the audio system switched on, once the "R ADIO"   or   "MEDIA"   menu   has   been   selected  
y

ou can activate or deactivate the functions
associated
  with   use   of   the   radio   (RDS,   Radio  
t

ext)   or   select   the   media   play   mode   (normal,  
r

andom,
 r
epeat).
For
  more   information   on   the   "R ADIO"   or  
"

ME
dIa" a
pplication, refer to the "
au
dio and
telematics"
 se

ction.
Displays in the screen
2
Multifunction screens

38
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Once the "TRIP COMPUTER" menu has been selected,   you   can   start   diagnostics   of   the   status  
o

f   the   equipment   (active,   not   active,   faulty).
Trip computer Date and time
Once the "DATE AND TIME" menu has been s
elected,   you   have   access   to   the   following  
se

ttings:
-
year,
-
 
m
onth,
-


d ay,
-
hours,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK" button to record the
change
  and   return   to   the   normal   display   or  
p

ress the "Back"
 
button   to   cancel.
Languages
Once the "LANGUAGES" menu has been selected,   you   can   choose   the   language   used   by  
t

he   display,   from   a   pre-defined   list.
Vehicle parameters
Once the " VEHICLE PAR AM" menu has been selected, you can activate or deactivate the
following
 e

quipment:
-
 
"
PARK  
B
R AKE"  
(
Automatic  
e
lectric  
p
arking  
b

rake;   refer   to   the   "Driving"   section),
-
 
"
BEND   LIGHTING"   (Directional   lighting;  
r

efer   to   the   " Visibility"   section),
-
 
"
AUTO   HEADLAMPS"   (Automatic  
i

llumination   of   headlamps;   refer   to   the  
"

Visibility"
 s
ection),
-
 
"
REAR   WIPE   ACT"   (Rear   wiper   coupled  
w

ith   reverse   gear;   refer   to   the   " Visibility"  
s

ection),
-
 
"
GUIDE  
L
AMPS"  
(
Guide-me-home  
l
ighting;  
r

efer   to   the   " Visibility"   section),
-
 
"
ELECTRIC   BOOT"   (Selective   unlocking  
o

f   the   boot;   refer   to   the   "Access"   section),  
"A

c c ess"),
-
 
"
CABIN   SELECT"   (Selective   unlocking;  
r

efer   to   the   "Access").
For
  safety   reasons,   configuration   of   the  
m

ultifunction   screen   by   the   driver   must  
o

nly   be   done   when   stationary.
Multifunction screens

39
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Monochrome screen C
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-
 
p
arking   sensor   information,
-

c
urrent audio source,
-
 
t
elephone   or   Bluetooth   system   information,
-
 
t
rip   computer   (refer   to   the   corresponding  
s

ection),
-
 
a
lert   messages,
-
 
s
ettings   menus   for   the   screen   and   the  
v

ehicle
 e
quipment. From
  the   control   panel   of   your   audio   system,  y
ou   can   press:
F
button A to chooses between the display
of
  audio   information   in   full   screen   or   the  
s

hared   display   of   audio   and   trip   computer  
i

nformation,
F
the "MENU" button for access to the main
menu ,
F

t
he "5" or " 6"
  buttons   to   scroll   through   the  
i

tems   on   the   screen,
F

t
he "7" or " 8"
  buttons   to   change   a   setting  
va

lue,
F
the "OK"
 

button   to   confirm,
or
F
the "Back" button to abandon the
operation
  in   progress.
Controls
F Press the "MENU" button for access to the
main menu :
-
 
"
Multimedia",
-


"Telephone",
-
 
"
Trip   computer",
-
"bl

uetooth connection",
-
 "

Personalisation-configuration",
F

P
ress the " 7" or " 8" button to select the
menu
  required,   then   confirm   by   pressing  
t

he "OK"
 
button.
Main menuDisplays in the screen
2
Multifunction screens

52
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
A few definitions…
Range
(miles or km)
W
hen
 
the
 
range   falls   below   20   miles
(30
 
km),
 
dashes   are   displayed.   After   filling   with   at
 l

east
 
5
 
litres
  of   fuel,   the   range   is   recalculated   and
 i

s
 
displayed
  when   it   exceeds   60   miles   (100   km).
Current fuel consumption
(mpg or l/100 km or km/l)
Average fuel
consumption
(mpg or l/100 km or km/l)
Average speed
(mph or km/h)
Distance travelled
(miles or km)
Stop & Start time counter
(minutes / seconds or hours / minutes)
If dashes are displayed continuously
while
 
driving
 
in
 
place
 
of
 
the
 
digits,
 c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 w

orkshop. The
 
fuel
 
consumption
 
of
 
your
 
vehicle
 
w

ill
 
be
 
higher
 
than
 
the
 
official
 
figures
 
o

btained
 
by
 
CITROËN
 
during
 
the
 
first
 
3

 
000
 
miles
 
(5
 
000
 
km)
 
of
 
the
 
vehicle's
 
l

ife.
This
 
function
 
is
 
only
 
displayed
 
from
 
2

0 mph
 
(30
 
km/h).
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
This indicates the distance which can still be
travelled
 
with
 
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
in
 
r

elation
 
to
 
the
 
average
 
fuel
 
consumption
 
over
 
t

he
 
last
 
few
 
miles
 
(kilometres)
 
travelled.
This
 
is
 
the
 
average
 
fuel
 
consumption
 
during
 
the
 
l

ast
 
few
 
seconds.
 

 
T

his
 
is
 
the
 
average
 
fuel
 
consumption
 
since
 
the
 
l

ast
 
trip
 
computer
 
zero
 
reset.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
This indicates the distance travelled since the
last
 
trip
 
computer   zero   reset.
This
 
is
 
the   average   speed   calculated   since   the  
l

ast
 
trip
 
computer   zero   reset   (ignition   on).
Multifunction screens

181
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automated mode
For optimum acceleration, for example when   overtaking   another   vehicle,   press   the  
a

ccelerator   pedal   firmly   past   the   point   of  
r

esistance.
The
  gearbox   operates   in   auto-active   mode,  
w

ithout   any   action   on   the   part   of   the   driver.  
It   continuously   selects   the   most   suitable   gear  
fo

r:
-  
o
ptimisation   of   fuel   consumption,
-  
t
he   style   of   driving,
-  
t
he   profile   of   the   road.
-  
t
he   vehicle   load.
AUTO
 
and   the   gear   engaged  
a

ppear   in   the   instrument   panel  
sc

reen.
ne

ver select neutral N while the vehicle
is
  moving.
ne
ver select neutral N  
w
hen
 d
riving. You
  can   change   mode   at   any   time   by  
m

oving   the   gear   lever   from   A to M or
the
  other   way   round.
F

Sel
ect position A
.
Temporary control of gear
changing
You can temporarily take over control of g
ear   changing   using   the   "+" and "-" 
steering  
m

ounted   paddles:   if   the   engine   speed   allows,  
t

he   request   to   change   gear   is   acted   on.
This function allows you to anticipate certain
situations
  such   as   overtaking   a   vehicle   or   the  
a

pproach   to   a   corner.
After
  a   few   moments   without   any   action   on  
t

he   control   paddles,   the   gearbox   resumes  
a

utomatic   control   of   the   gears.
Manual mode
The gears engaged appear in succession   in   the   instrument   panel  
sc

reen.
The
 
gear
 
change   requests   are   only   acted   on   if  
t

he
 
engine
 
speed   permits.
It is not necessary to release the accelerator
during
 
gear
  changes.
When
 
braking   or   slowing   down,   the   gearbox  
c

hanges
 
down   automatically   to   allow   the  
v

ehicle
 
to
 
accelerate   in   the   correct   gear.
On
 
sharp
 
acceleration,   the   gearbox   will   not  
c

hange
 
up
 
unless   the   driver   acts   on   the   gear  
l

ever
 
or
 
the
  steering   mounted   paddles.
F

Sel

ect position M
.
9
Driving