2015 Citroen C4 Owner's Manual

247
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Changing foglamp bulbs
F Introduce a flat screwdriver in the hole in the f inisher.
F
 
P
ull   and   lever   to   unclip   the   bumper   finisher  
(

the   parking   sensor   stays   with   the   finisher).
F
 
R
emove   the   two   module   fixing   screws   and
 r

emove   it   from   its   housing.
F
 
D
isconnect   the   bulb   holder   connector.
F
 
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
e

xtract   it.
F
 
P
ull   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
To
  replace   these   bulbs   you   may   also   contact   a
 C

ITROËN   dealer   or   a   qualified   workshop.
Changing the side spotlamps
(LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Changing integrated direction
indicator side repeaters
F Insert a flat screwdriver towards the centre of the repeater between the repeater and
the
  base   of   the   mirror.
F
 
T
ilt   the   flat   screwdriver   to   extract   the  
r

epeater   and   remove   it.
F
 
D
isconnect   the   repeater   connector.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   obtain   replacement   repeaters.
11
Practical information

248
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Model with 3D rear lamps
1. Brake lamp (P21W).
2. Sidelamp (R10W ).
3.
D

irection indicator (PY21W amber) .
4.
R

ear foglamp, offside (P21W).
5.
R

eversing lamp, nearside (P21W).
Access to rear lamps
Amber bulbs, such as those for the direction   indicators,   must   be   replaced  
b

y   bulbs   of   the   same   rating   and   colour.
The
  lamps   on   the   tailgate   are   dummy  
u

nits.   They   are   there   for   aesthetic  
p

urposes   only.
Rear lamps
Model with conventional lamps
(t y p e 1)
1. Brake lamp / sidelamp (P21/5W).
2. Direction indicator (PY21W amber) .
3.
R

eversing lamp (P21W).
4.
R

ear foglamp (P21W). You
  will   need   a   flat   screwdriver   and   a   10   mm  
b

ox
 span
ner.
The
  four   bulbs   are   changed   from   inside   the  
b

oot:
F

o
pen the boot,
F
 
r
emove   the   access   flap   from   the  
c

orresponding   side   trim   panel,
F
 
u
nclip   the   lamp   unit   connector,
F
 
a
s   a   precaution,   place   a   cloth   in   the   bottom  
o

f   the   housing   to   catch   the   nut   if   it   is  
d

ropped   on   removal,
F
 
s
lacken   the   hexagonal   nut   using   a   10   mm  
b

ox   spanner   then   remove   the   nut   by   hand,
F
 
c
arefully   remove   the   lamp   unit   by   pulling  
o

ut   it   straight   out   towards   the   rear.
Practical information

249
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
After removing the lamp unit, carry out the following   operations   to   replace   the   failed   bulb:
F
 
r
emove   the   two   bulb   holder   fixing   screws,
F
 
s
pread   the   four   tabs   and   remove   the   bulb  
h

o l d e r,
F
 
t
urn   the   bulb   a   quarter   of   a   turn   and   change   it.
Changing rear lamp bulbs
(t y p e 1)
After removing the lamp unit, carry out the following   operations   to   replace   the   failed   bulb:
F
 
r
emove   the   three   bulb   holder   fixing   screws,
F
 
s
pread   the   three   tabs   and   remove   the   bulb  
h

o l d e r,
F
 
t
urn   the   bulb   a   quarter   of   a   turn   and   change   it.To refit, carry out these operations in reverse
o r d e r.
Changing rear lamp bulbs
(type
2)
Take care to engage the lamp unit in its g
uides,   while   keeping   it   in   line   with   the  
v

ehicle.
Tighten
  sufficiently   to   ensure   sealing,  
b

ut   without   forcing,   so   as   to   avoid  
d

amaging
 t
he
 lam
p.
11
Practical information

250
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
To facilitate the removal of the lamp, carry out this   operation   with   the   tailgate   half   open.
F

I
nsert a thin screwdriver into the lens
cutout.
F
 
P
ush   it   outwards.
F
 
R
emove   the   lens.
F
 
C
hange   the   faulty   bulb.
To
  refit,   press   on   the   lens   to   clip   it   in   place.
Third brake lamp (LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Number plate lamps (W5W)
Practical information

251
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Changing a fuse
The extraction tweezer is attached to the back of   the   dashboard   fusebox   cover.
For
  access   to   it:
F
 
u
nclip   the   cover   by   pulling   at   the   top   right,  
t

hen left,
F
 
d
isengage   the   cover   completely   and   turn   it  
o

ve r,
Access to the tools
F remove   the   carrier,   on   the   back   of   which  t
he   tweezer   is   fitted.
11
Practical information

252
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Changing a fuse
GoodFailed
To
 
replace
 
a
 
fuse,
 
you
 
must:
F
 
u

se
 
the
 
special
 
tweezer
 
to
 
extract
 
the
 
fuse
 f
rom
 
its
 
housing
 
and
 
check
 
the
 
condition
 
of
 it
s f
ilament.
F

a

lways replace the failed fuse with a fuse
of
 
the
 
same
 
rating
 
(same
 
colour);
 
the
 
use
 
o

f
 
a
 
fuse
 
of
 
different
 
rating
 
fuse
 
may
 
cause
 
m

alfunctions
 
(risk
 
of
 
fire).
If
 
the
 
fault
 
recurrs
 
soon
 
after
 
replacing
 
the
 
f

use,
 
have
 
the
 
electrical
 
system
 
checked
 
by
 
a
 
C

ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop. Tw e e z e r
The
  replacement   of   a   fuse   not  
m

entioned   in   the   tables   below   may  
c

ause   a   serious   malfunction   of   your  
v

ehicle.   Contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
CITR
oËn
will not accept responsibility for
the   cost   incurred   in   repairing   your   vehicle
 o
r   for   rectifying   malfunctions   resulting f
rom   the   installation   of   accessories n

ot   supplied   and   not   recommended   by
 C

ITR
oËn an
d not installed in accordance
with its instructions, in particular when
the
  combined   consumption   of   all   of   the
 a

dditional   equipment   connected   exceeds
 1

0
 mil
liamperes.
Installing electrical
accessories
Your vehicle's electrical system is designed   to   operate   with   standard   or  
o

ptional
 e
quipment.
Before
  installing   other   electrical
 e

quipment   or   accessories   on   your
 v

ehicle, contact a CITR
oËn
dealer or a
qualified
 w

orkshop.
Before
 
changing
 
a
 
fuse:
F
 
t

he
 
cause
 
of
 
the
 
failure
 
must
 
be
 
identified
 a
nd rectified,
F
 a
ll
 
electrical
 
consumers
 
must
 
be
 
switched
 
off,
F
 
t

he
 
vehicle
 
must
 
be
 
immobilised
 
with
 
the
 
ig

nition
 o

ff,
F
 
i

dentify
 
the
 
failed
 
fuse
 
using
 
the
 
tables
 
and
 
d

iagrams
 
in
 
the
 
following
 
pages.
Practical information

253
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Dashboard fuses
Access to the fuses
F Refer  to   the   paragraph   "Access   to   the   tools".
Fuse tables
Fusebox 1
Fuse N° Rating Functions
F8 3 AAlarm
 s

iren,
 alar
m
 E
CU.
F13 10 A12
  V   socket.
F14 10 A12
  V   socket   in   boot.
F16 3 ALighting
  for   the   large   multifunctional   storage   unit,   rear   map  
r

eading   lamps,   glove   box   illumination.
F17 3 ASun
  visor   illumination,   front   map   reading   lamps.
F28 15 AAudio
  system,   radio   (after-market).
F30 20 ARear
  wiper.
F32 10 AHi-Fi
  amplifier.
The
 
fuseboxes
 
are
 
located
 
in
 
the
 
lower
 d
ashboard
 
(left-hand
 
side).
11
Practical information

254
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Fuse N°Rating Functions
F36 15 ARear
  12   V   socket.
F37 -Not
  used.
F38 -Not
  used.
F39 -Not
  used.
F40 25 A230
  V   /   50   Hz   socket.
Fusebox 2
Practical information