2015 AUDI Q5 buttons

M N
co
a:
co
,...., \!) 1.1"1
N 1.1"1 ,....,
(!) Memory buttons (driver's seat)
@ Door handle
@ Power locking switch ........ .. .
© Side assist button ............ .
® Air outlets ............ .. .. .. .
@ Turn signal and high beam ..... .
(j) Multifunction steering wheel with:
- Horn
- Driver's airbag ........ .. .. .. .
- Audio/video, telephone, naviga-
tion and voice recognition but­
tons
- Rocker switches for tiptron ic op-
eration ... ........... .. .. .. .
@ ISETI button ............... .. .
® Instrument cluster ............ .
@ Reset button for trip odometer .. .
@ Switches for:
- Windshield wiper/washer ..... .
- Trip computer .............. .
@ Ignition lock ........... .. .. .. .
@ Adjustable steering column
~ Control lever for: 64
42
116
81
55
156
127
11
10
13
57
22
84
84
- Cruise control . . . . . . . . . . . . . . . 95
- Adaptive cruise control . . . . . . . 107
@ Data Link Connector for On Board
Diagnostics (OBD II) . . . . . . . . . . . 26
@ Release lever for the engine hood . 221
@ Instrument illumination . . . . . . . . 56
@ Light switch . . . . . . . . . . . . . . . . . . 52
@ Switch for unlocking the trunk lid . 43
@ Adjuster control for outside mirrors . . 59
@ Power window switches . . . . . . . . . 46
@ Radio system or Audi multimedia
(see separate manual)
@ Radio or MMI display (see separate
manual)
@ Button/Indicator light for:
- Emergency flasher .......... .
- PASSENGER AIR BAG OFF
@ Glove compartment (lockable) .. .
@ Front passenger's airbag ....... .
@ Depending on options:
- Audi drive select button ...... .
- Start-Stop-System button or .. .
- Id'! button (hybrid drive) .... . .
- Parking system button ....... .
- Electron ic Stabilization Control
(ESC) button ............... .
- Hill descent assist button ..... .
@ Climate control ............. . .
@ Shift lever for automatic transmis-
sion ........................ .
@ Ashtray with cigarette lighter
@ Coin storage
@ Depending on options:
- MMI control console or
- Parking system button ....... .
- Electron ic Stabilization Control
(ESC) button ............... .
Cockpit
54
78
156
120 91
101
129
191
193
80
123
76, 76
129
191
- Hill descent assist button . . . . . . 193
-Audi drive select button . . . . . . . 120
- Start-Stop-System button . . . . . 91
@ I START ENGINE STOPI button . . . 87
@> Electromechanical parking brake 89
(D Tips
Some of the equipment or features shown in
the general illustration may be standard
equipment on your vehicle or may be optional
equipment depending on your model. Always
ask your authorized Audi dealer if you have a
question about your vehicle.
9

Open ing a nd clos ing
Op en ing and cl osing th e s unshade
.. To automatically open the sunshade comp lete­
ly, briefly press th e switch @ in the desired ar­
row direction.
.. To stop the sunshad e in an intermediate posi­
tion, press the switch again, or
.. Press and hold the swi tch in the desired arrow
direction .
.. Release the switch when sunshade is at desired
pos ition .
After the ignit ion is switched off, you can st ill op­
erate the Panoramic sliding sunroof for about 10
minutes . As soon as the driver's or passenger's
door is opened, the switch is inoperative .
The power sunshade can also be closed when the Panoramic sliding sunroof is open .
A WARNING
Pay careful attention when closing the Panor­
amic sliding sunroof -otherwise serious injury
cou ld result! For th is reason, always remove
the ignition key when leaving the vehicle .
(D Note
Always close your Panoram ic sliding sunroof
when leav ing you r vehicle. Sudden rain can
cause damage to the interior equipment of
your veh icle, particularly the electron ic equ ip­
ment.
(j) Tips
I nformat ion regarding convenience opening/
closing
¢ page 47.
Emergency closing of the Panoramic sliding
sunroof
Applies to veh icles: w ith Panora mic slidi ng sunroo f
If the Panoramic sliding sunroof detects an ob ­
ject in its path when it is clos ing , it will open
aga in automatically . In this case, you can close
the roof with the power emergency closing func ­
tion .
.. Within
five seconds after the sunroof opens au­
tomat ically, pull the switch until the roof
closes .
48
Garage door opener
(Homelink)
Description
App lies to vehicles: wit h garage door opener (Homelink)
Fig. 43 Ga rage door o pen er: examples of us in g w ith differ·
ent syste ms
You can activate var ious systems such as garage
doors, security systems and home lighting from in side your vehicle using the garage door opener
(Homelink). There are three buttons for th is in
the vehicle headliner that can be in used in place
of up to three hand-held transmitters.
To operate systems using the garage door open­
er, the three buttons in the roof headliner must
be programmed first .
A WARNING
Make sure no people or objects are in the im­
mediate vicinity of the equipment when using
or programming the garage door opener. Peo­ ple can be injured and objects can be dam­
aged if they are caught in the equipment.
(D Tips
- For security reasons, we recommend that
you clear the programmed buttons before
selling the vehicle.
- For add itiona l information about Homel ink,
visit www.homelin k.com .
- For Declaration of Compliance to United
States FCC and Industry Canada regulations
~page 284.
-

M N
co ~ co
rl I.O
"' N
"' rl
Operation
Applies to vehicles: with garage door opener (Homelink)
Fig. 44 Hea dlin er: co ntrol un it
Requirement : The but tons in the roof headliner
mu st be programmed
c:> page 49 or
c::> page SO and the vehicle must be within
range of the system, such as the garage door
opener .
" Press the button to open the garage door . T he
LED @ blinks or turns on .
" Press the button again to clos e the garage
doo r.
@ Tips
To open o r close the ga rage doo r, press the
button, but do not hold it fo r longer than
10 seconds o r the g arage doo r opener mod ule
w ill switch to programm ing mode .
Programming the buttons (version A )
Applies to vehicles: with garage door opener (Ho meli nk)
You can p rogram both fixed code and roll ing code
systems using this proced ure.
Programming or reprogramming buttons
" Swi tch the ign ition on .
" Press and ho ld the bu tton in the roof head liner
c::> page 49, fig. 44 that you would like to pro ­
gram for at least 10 seconds . Or
.. Se lect:
I CAR I function button > Car sy stem s*
control button > Vehicle sett ing s > Garage
door opene r> Program gar age door opener .
If
th is path is not available, program the button
as described in vers io n B
c::> page SO .
"Fo llow the instructions in the MMI* .
Opening and clo sing
Erasing button programming
The programmed b uttons cannot be er ased ind i­
vidually. They must all be erased together . Repro­
gram the buttons if necessary .
" Select:
!CARI function button> Car sy ste m s*
contro l butto n > Vehicle settin gs > Garag e
d oo r opener
> Clear program setting s > Yes.
Displaying the version /status /country code
" Select: !CARI function button> Car sy ste ms *
cont ro l button > Vehicle s etting s> Garage
d o or open er > Version information .
(D Tips
-Programm ing throug h the MMI* is not pos­
sible with all infotai nment systems. If this
is the ca se, program the buttons as des cri ­
bed in vers ion B
c::> page 50 .
- T he req uired dis tance be twee n the h and
transm itter and the Home link mo dule in
the radiator gr ille
c::> page 50, fig . 45 de­
pends on t he system that you are program­
m ing.
- Depending on the mode l of the system, you
may need to re lease the button on the re­
mote control during programming and
press it aga in. Hold each position you try for
at least 15 seconds before trying another
posit ion . Keep the turn signals on your vehi ­
cle i n view when doing this.
- After programm ing the garage door opener,
it may be necessary to synchronize the mo­
to r wi th the sys tem. Ref er to the man ufac­
t ur e r's instru ct ions .
49

Opening and closing
Programming the buttons (version 8)
Applies to vehicles: with garage door opener (Homelink)
Fig . 4 5 Dis tan ce betwee n th e ra diato r grille a nd the hand
t ra n sm itter
Programming the button : Part 1 with th e
controls
1. Switch the ignition on .
2. Press and hold both outer buttons in the roof headliner
c;, page 49, fig. 44 until the LED @
turns off comp lete ly (after about 20 sec ­
onds). This procedure clears the standard co­
des that were set at the factory and does
not
need to be repeated again to p rogram the
other buttons .
3. Br iefly p ress the button on the roof head liner
that you wou ld like to p rog ram.
4. Wai t unti l the LED @ beg ins to b link quickly.
P rog ramming mode is active for S minutes .
5. Move in front of your ve hicle while ho ld ing
the orig inal remote control for the system
that would like to program to a button in the
roof headliner.
P rogramming the button : Part 2 at the
radiator grille
6. Ho ld the remote control up to the radiator
grille on your vehicle
c;, fig . 45.
7. Press and hold the remote control until the
turn sig nals on yo ur vehicle b link . This may
take up to 30 seconds .
8 . If th e emergen cy flashe rs bl ink three times,
the programm ing was s uccessful.
If the
emergency flashers on ly blink one time, the
5 minute t ime limit for t he p rogramming has
e nded o r the p rog ramming was not success­
fu l. Repeat the programming from the t hird
step, or try changing t he distance to the radi­
ator grille.
50
9 . If the garage door or other system does not
open using the buttons i n the roof headliner
even tho ugh the programming was success­
ful, the system may use a rolling code in­
stead of a fixed code.
Rolling code program ­
ming
must be perfo rmed c;, page 51.
The other two b uttons in the roof headliner can
be programmed according to the instruct io ns
above. Beg in with the third step.
Erasing button programming
The programmed buttons cannot be erased indi ­
vidually. They m ust all be erased together . Repro ­
gram the buttons if necessary .
.,.. Sw itch t he ignit io n on.
.,.. Press and hold both outer buttons in the roof
head liner until the LED @turns off completely
(after about 20 seconds) .
Reprogramming the buttons
.,.. Switch the ignit io n o n.
.,.. To reprogram an individua l bu tto n, press and
hold the button unti l the LED @starts to flash
quickly (after a bout 10 seconds) . Release the
button immed iately . Programm ing mode is ac­
tive for S m inutes .
.,.. Continue with the fifth step.
@ Tips
- Programming using the buttons in the roof
headliner is not poss ible with all Infotain­
ment systems. If th is is the case, program
t he b uttons as descr ibe d in version A
c;, page 49 .
-Th e re quired dis tance between the hand
t ransm itt er an d th e H ome link mo dule i n
t h e radiator gr ille
c;, fig. 45 dep end s on t he
s y st em t hat you are pr ogra mming.
- Depen ding on the mode l of the sys tem, you
m ay need to re lease the bu tton on t he re­
m ote co nt rol dur ing p rog ramming an d
p ress i t ag ain. H old ea ch posi tion you try for
a t l east 15 seco nds be fo re trying another
p osit io n. K eep the tur n signa ls on you r vehi ­
cle in view when doing this .

M N
co
a:
co
,...., \!) 1.1'1
N 1.1'1 ,....,
Rolling code programming
Applies to vehicles: with garage door opener (Homelink)
Rolling code programming is also needed for
some systems .
Identifying a rolling code
~ Press and hold the button in the roof head liner
that was already programmed .
~ Watch the LED@ Q page 49, fig. 44. If the LED
blinks qu ickly, the systems (such as a garage
door) is equ ipped with a rolling code.
~ Program the rolling code as follows:
Activating the motor unit in a system
~ Locate the programming button on the sys­
tem's motor unit. The exact location and color of the button may vary depending on the brand
of the system.
~ Press the programm ing button on the garage
door opener motor unit (this will usually acti­
vate an "indicator" on the motor unit). You now
have approximately
30 seconds to program the
button in the roof headliner.
Programming the button in the roof
headliner
~ Press and hold the previously programmed but­
ton in the roof head liner for 2 seconds .
~ To end rolling code programming, press and
ho ld the button again for two seconds.
~ With some systems, the button may need to be
pressed a th ird time to end the programming
process .
After programming, the system should detect
the signal and beg in mov ing when the button in
the roof headliner is pressed. Now you may pro­
gram the other buttons as needed .
(D Tips
-The roll ing code can be programmed more
quick ly and more easily with the help of a
second person .
- If you have difficulty programming the roll­
i ng code, referring to the user guide for the
system may help.
Opening and closing
51

Seats and storag e
panel than necessary and always wear the three­
point safety belt provided adjusted correctly. We
recommend that you adjust the passenger's seat
in the following manner:
.. Move the front passenger seat into the rear­
most position of the fore and aft adjustment
range ¢
.A in Why is your seat adjustment so
important? on page 63.
.. Bring the backrest up to an (almost) upright
pos ition.
D o not ride with the seat reclined.
.. Adjust the head restra int so the upper edge is
as even as possible with the top of your head . If
that is not possible, try to adjust the head re­ stra int so that it is as close to th is posi tion as
poss ib le¢
page 67.
.. Place your feet on the floor in front of the pas­
senger's seat .
Front seats
Power seat adjustment
Fig. 6 4 Front seat ; Controls for seat adjustment
Contr ols
@ -Adjusting the lumbar support: press the but­
ton in the corresponding posit ion¢ &.
@ -Moving the seat up/down: press the button
up/down . To ad just the front seat cush ion, press
the front button up/down. To adjust the rear seat
cushion, press the rear button up/down
¢ &.
@ -Moving the seat forward/back: press the but­
ton forward/back ¢ & .
©-Adjusting the backrest a ngle: press the but­
ton fo rward/back ¢ & .
@ -Lengthen ing/shortening the upper th igh
suppor t*: lift the handle¢&,.
64
A WARNING
-Never adjust the driver's or front passeng­
er 's seat while the veh icle is moving. If you
do th is while the veh icle is moving, you will
be out of pos it ion. Always adjust the d river 's
or front passenger's sea t when the vehicle is
no t moving.
- Be ca reful whe n ad justing the seat he ight.
Check to see t hat no one is in the way, or se­
r io us inju ry co uld resu lt!
- Because the seat s can be elec trically adjust­
e d w ith the ignition off or with the ignition
key removed, neve r leave childre n unattend­
ed in the vehicle . Unsupervised use o f the
electric seat ad justments may cause serious
in jury.
- To reduce the risk of injury in the case of
sudden braking or accident, front passen ­
gers must never ride in a moving vehicle
w it h the backrest reclined. Safety belts and
the airbag system only offer max imum pro­
tect ion when the backrest is up right and the
safety belts are prope rly positioned on the
body. The more the ba ckrest is re cli ned, the
greate r the risk of perso na l inju ry from an
incorrect seating posit ion and improperly
posi tioned safety belts.
Memory function
Memory for driver's seat
App lies to vehicles: wit h seat memory
The seat adjustment settings for two drivers can
be stored using the memory buttons in the driv­
er's door .
Fig. 65 Dr ive r's door: Seat memory
M a,
"' 9 a: a, m

M N
co
a:
co
,...., \!) ..,.,
N ..,., ,....,
In addition to the setting for the drive r's seat ,
the exterior rear view mirror setting can be stor­
ed and reca lled through seat memory if the veh i­
cle is properly equipped.
Storin g and recallin g se tting s
With the help of the memory buttons 1 and 2
¢ fig. 65 the settings for two different drivers
can be stored and reca lled
r::!> page 65.
The cu rrent settings are also a utomat ica lly as ­
signed to the remote control key being used
when the vehicle is locked . When the vehicle is
un locked, the settings assigned to the remote
contro l key being used are automatica lly recalled .
Turnin g seat m emo ry on and off
If the IO FF I sw itch is depressed, the seat memory
is inoperative . When the Memory function is off,
the LED in the button lights up.
All the stored settings a re retained. We recom­
mend using the
I O FF I sw itch and de activating the
seat memory if the vehicle is only go ing to be
used
temporarily by a driver whose settings are
not going to be stored .
Storing and recalling settings
Applies to vehicles: with seat memory
Storing settings
~ Adjust the driv er's seat.
~ Adjust the two exter ior mirrors.
~ Press the !SET I button. The light in the button
will come on.
~ Now p ress a memory button (III or~). If the
stor ing procedure is correct, a confirmation
tone w ill sound .
Recall ing setting s
~ If the dr iver 's door is open and the ignit ion is
switched off, tap the correspond ing memory
button br iefly .
~ If the dr iver's door is closed or the ignit ion is
switched on, p ress the approp riate memo ry
button until the s to red pos ition is rea ched .
Successful storage is confirmed audibly and by
the light in the
ISET I button illum inat ing
r::!> page 64, fig . 65.
S eat s and stor age
When the vehicle is lo cked , the current settings
are stored and assigned to the remote contro l
key . But the settings stored on memory buttons
1 to 2 are not deleted . They can be recalled at
any time . When the vehicle is
unlocked , the set­
t ings assigned to the remote control key a re re ­
stored .
If your vehicle is driven by other persons using
your remote control key, you should save your in­
dividua l seat position on one of the memory but ­
tons . You can recall your settings again simply
and conveniently by p ress ing the corresponding
memo ry butto n. When the vehicle is locked,
these settings are automatica lly re-assigned to
the remote control key and stored .
& WARNING
- For safety reasons, the seat setting can only
be recalled when the vehicle is stationary -
otherwise you risk hav ing an accident.
- In an emergency the recall proced ure can be
cancelled by pressing the
I OFF I switch or by
tapp ing of the memory buttons.
Activating remote control key memory
Applies to vehicles: wit h seat memory
To assign the dr iver 's seat settings to the remote
control key when locking the vehicle, the function
must be activated in the radio or MMI*.
~ Select: ! CAR I function button > Seat adju st­
ment > Dri ver's seat > Key mem. p ro fi le > On .
Or
~ Select: !CARI function button> Car sy ste ms*
cont ro l butto n > Vehicl e se tting s > Seats >
Driver 's seat > Remote control ke y> On .
(j) Tips
If you do not want anothe r driver's sett ings to
be assigned to the remote control key, switch
off the memory function usi ng the rad io or
M MI* or t he
I OFF I button r::!> page 64.
65