2014 TOYOTA PRIUS PLUS Owners Manual

Page 353 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3536-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)
6
Maintenance and care
Checking and replacing fuses
Turn the power switch off.
Open the fuse box cover.
�XEngine compartment
Push the tab in

Page 354 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3546-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)
�XLeft side instrument panel (right-hand drive vehicles)
Remove the cover.
Remove the lid.
Remove the fuse.
Only type A fuse can be
removed

Page 355 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3556-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)
6
Maintenance and care
Check if the fuse is blown.Normal fuse
Blown fuse
Replace the blown fuse with a new fuse of an appropriate amperage r

Page 356 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3566-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)
■After a fuse is replaced
●If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. ( →P. 357)

Page 357 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3576-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)
6
Maintenance and care
Light bulbs
Check the wattage of the light bulb to be replaced. (→P. 462)
→ P.  3 1 8
■Front
Front fog light
Fr

Page 358 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3586-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)■
Rear
Rear fog light (left-hand drive 
vehicles) or back-up light
License plate lights
Rear fog light (right-hand
drive vehicles) or back-

Page 359 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3596-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)
6
Maintenance and care
■Front fog lightsRemove the fender liner bolts
and pull down the fender
liner.
Unplug the connector while
pressing

Page 360 of 496

TOYOTA PRIUS PLUS 2014  Owners Manual 3606-3. Do-it-yourself maintenance
PRIUS +_OM_OM47888E_(EE)
Set the new light bulb.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn it clockwise to set.
Set the connector.
After