2014 TOYOTA PRIUS PLUS Owners Manual

1052. Instrument cluster
2
Instrument cluster
PRIUS +_OM_OM47888E_(EE)
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
*1
(Red)
Brake system warning
light (→P. 376)*1, 2
(If equipped)
PCS warning light
(→ P. 378)
*1
(Yellow)
Brake system warning
light ( →P. 376)*1Slip indicator light
(→ P. 378)
*1Charging system
warning light ( →P. 376)*1High coolant
temperature warning
light ( →P. 380)
*1
(If equipped)
Low engine oil pressure
warning light ( →P. 377)*1
(If equipped)
Parking lock system
warning light ( →P. 378)
*1
(If equipped)
Hybrid system warning
light ( →P. 377)
(If equipped)
Parking lock
system warning
message
(→ P. 379)
*1Malfunction indicator
lamp ( →P. 377)
(If equipped)
Hybrid battery indicator
light ( →P. 379)
*1SRS warning light
(→ P. 377)*1
(If equipped)
LED headlight warning
light ( →P. 379)
*1ABS warning light
(→ P. 377)*1Automatic headlight
leveling system warning
light ( →P. 380)
*1Electric power steering
system warning light
(→ P. 377)*1
(Flashes)
(If equipped)
P position request
indicator light ( →P. 379)

1062. Instrument cluster
PRIUS +_OM_OM47888E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if the lights do not turn on, or turn off. Have the vehicle inspected
by any authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
*2: The light flashes to indicate a malfunction.
*1
(If equipped)
Hybrid system overheat
warning light ( →P. 380) Rear passengers’ seat
belt reminder light
(
→ P. 381)
(Yellow)
(If equipped)
Cruise control indicator
(→ P. 380)
(If equipped)
Smart entry & start
system warning light
(→ P. 386)
Open door warning light
( → P. 380)
*1
(If equipped)
Master warning light
(→ P. 381)
Low fuel level warning
light ( →P. 380)
*1Tire pressure warning
light ( →P. 381)
Driver’s and front
passenger’s seat belt
reminder light ( →P. 381)
*1
(If equipped)
Go to service warning
light ( →P. 382)

1072. Instrument cluster
2
Instrument cluster
PRIUS +_OM_OM47888E_(EE)
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
(→ P. 213)
(If equipped)
Radar cruise control
indicator ( →P. 231)
Tail light indicator
( → P. 215) “SET” indicator
(
→ P. 227, 231)
Headlight high beam
indicator ( →P. 215)
*1, 2Slip indicator
(→ P. 249)
Front fog light indicator
( → P. 218)
(If equipped)
EV indicator ( →P. 114)
Rear fog light indicator
( → P. 218)
*1
(If equipped)
Eco Driving Indicator
Light ( →P. 114)
Security indicator
( → P. 91, 97) EV drive mode indicator
(
→ P. 206)
“READY” indicator
( → P. 201) Shift position indicators
(
→ P. 208)
“ECO MODE” indicator
( → P. 247)
*1, 3
(If equipped)
PCS warning light
(→ P. 255)
“PWR MODE” indicator
( → P. 247)
*4
“PASSENGER AIR
BAG” indicator ( →P. 5 6 )
(Green)
Cruise control indicator
(→ P. 227, 231)

1082. Instrument cluster
PRIUS +_OM_OM47888E_(EE)
*1: These lights turn on when the power switch is turned to the ON mode toindicate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if the lights do not turn on, or turn off. Have the vehicle inspected
by any authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off.
*4: This light illuminates on the center panel.
WARNING
■ If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional immediately if this occurs.

109
2
2. Instrument cluster
Instrument cluster
PRIUS +_OM_OM47888E_(EE)
Gauges and meters
XLeft-hand drive vehicles without multi-information display
XLeft-hand drive vehicles with multi-information display

1102. Instrument cluster
PRIUS +_OM_OM47888E_(EE)
XRight-hand drive vehicles
The units used on the meters may differ depending on the target
region. Hybrid System Indicator
Displays hybrid system output or regeneration level
Speedometer
Displays the vehicle speed
Shift position indicators
Displays the selected shift position. ( →P. 208)
Fuel gauge
Displays the quantity of fuel remaining in the tank
Hybrid battery (traction battery) status
The amount of charge remaining in the hybrid battery (traction battery) is
shown by 8 bars.
Clock
Displays the time. (Adjustment procedure: →P. 293)
1
2
3
4
5
6

1112. Instrument cluster
2
Instrument cluster
PRIUS +_OM_OM47888E_(EE)
Odometer and trip meter display
Odometer:
Displays the total distance that the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters “A” and “B” can be used to record and display different
distances independently.
Trip information display
Displays fuel consumption, etc.
Multi-information display
Presents the driver with a variety of driving-related data (→P. 118)
Displays warning messages in case of a malfunction ( →P. 388)
The speed units can be selected.
Press the button to switch the dis-
play between MPH and km/h.
MPH or km/h button (if equipped)
7
8
9

1122. Instrument cluster
PRIUS +_OM_OM47888E_(EE)
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the TRIP button will reset
the trip meter.
• While the odometer is being dis-played, or when the odometer/trip
meter are not being displayed,
the average fuel consumption
from the last reset will be dis-
played.
• While the trip meter is being dis- played, the average fuel con-
sumption will be displayed in
accordance with the trip meter
distance from the last reset.
• The function can be reset by pressing the TRIP button for longer than 1 second when the average fuel consumption is displayed on the trip
meter.
Use the displayed average fuel consumption as a reference.
The brightness of the instrument cluster lights can be adjusted by 4
steps each time the button is pressed.
The reduced brightness can be canceled by pressing and holding the but-
ton. To turn on this function, press the button again.
When the tail light is on, the brightness of the instrument cluster lights
can be adjusted. (For vehicles with the automatic light control system,
the lights can be adjusted when the tail light is on and the surrounding
area is dark.)
Changing the display
Instrument cluster light control
XTy pe AXType B