
22 Opening and Locking
Locking doors
Locking with the key
1. Close the door. 2. Press button once. The emergency flasher flashes twice and an acoustic signal will sound twice.The doors cannot be opened from outside.orIf persons or animals are remaining in the vehicle , press button twice within 2 seconds.The emergency flasher emits one long flash.The alarm system’s interior surveillance is switched off.The doors can be opened from inside by pulling on the door opener.fInform any persons remaining in the vehicle that the alarm system will be triggered if the door is opened.
Information
When locking the vehicle with only the driver's door closed, the vehicle will be pre-locked. Make sure that the key is not inside the vehicle when closing the open passenger's door/luggage compartment lid.
Information
The emergency flasher indicates that the vehicle has been locked successfully only when all the doors, the engine compartment lid and the tailgate are closed.
Locking with Porsche Entry & Drive (keyless)
You must carry the key with you. 1. Close all doors. 2. Press the locking button A on the door handle. The emergency flasher flashes twice and an acoustic signal will sound twice.The doors cannot be opened from outside.orIf persons or animals are remaining in the vehicle ,fpress the locking button A on the door handle twice within 2 seconds.The emergency flasher emits one long flash.The alarm system’s interior surveillance is switched off.The doors can be opened from inside by pulling on the door opener.fInform any persons remaining in the vehicle that the alarm system will be triggered if the door is opened.
Information
The vehicle cannot be locked if any of the doors or the luggage compartment are not completely closed.A warning signal sounds in the passenger compartment and a warning message appears on the multi-function display.
The key must be outside the vehicle when locking the vehicle doors, otherwise the vehicle doors cannot be locked.
If the key is out of range, the vehicle doors and the luggage compartment can no longer be opened after the vehicle is locked.
Automatic door locking and automatic door unlocking
In an emergency situation where you need to exit the car through an automatically locked door, remember the following procedure to open the door.fUnlock the doors by pressing the central locking button or fPull the inner door handle to open the door.
Emergency Auto Lock Override
WARNINGh
14_991_Turbo_21.book Seite 22 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 23
In the multi-purpose display of the instrument panel, you have the option of selecting diverse variants of automatic door locking and automatic door unlocking.
For information on modifying the opening and locking settings:fPlease see the chapter “LOCKING SETTINGS” on page 122.
Opening and Locking from Inside
The factory settings of the vehicle are described in this section. In the multi-function display in the instrument panel, you can change the settings and store them on the respective key for vehicles with memory.
For information on modifying the opening and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.Central locking button
Locking doors
fPress the central locking button.When the ignition is switched on, the indicator light in the button lights up.Both vehicle doors will be locked (only if all doors are closed).The doors can be opened from inside by pulling on the door opener.
Automatic with Auto Lock
If this function is activated, the vehicle is locked automatically when a speed of approximately 2 mph (5 km/h) is exceeded.
For information on modifying the unlocking and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.
Unlocking doors
fPress the central locking button.The indicator light on the button goes out.Both vehicle doors will be unlocked.
Automatic with Auto Unlock
The vehicle is automatically unlocked when the ignition key is removed.
For more information on modifying the unlocking and locking settings: fPlease see the chapter “LOCKING SETTINGS” on page 122.
Information
If the vehicle was locked using the car key or the emergency key, it cannot be unlocked with the central locking button.
Information
In the event of an accident with airbag deployment, the doors are unlocked automatically to facilitate fast access for helpers. The emergency flasher is also activated automatically.
14_991_Turbo_21.book Seite 23 Mittwoch, 9. April 2014 2:19 14

26 Opening and Locking
Closing luggage compartment lid
1.Lower lid and let it fall into the lock. If necessary, push the lid closed with the palm of your hand in the area of the lock.2. Check that the lid has correctly engaged in the lock.
When the vehicle is in motion, a message will appear on the multi-function display in the instru-ment panel if the lid is not closed properly.
Opening engine compartment lid with the pull-button
Coupé only:
1. Open the driver’s door. 2. Operate pull-button B next to the driver’s seat. The lid is unlocked and can be raised.
Cabriolet only:
1. Open the driver’s door. 2. Operate pull-button B next to the driver’s seat. Engine compartment lid (convertible-top compartment lid) opens automatically to the service position.
Closing engine compartment lid
Coupé only:
1. Lower lid and let it fall into the lock. If necessary, push the lid closed with the palm of your hand in the area of the lock.2. Check that the lid has engaged correctly in the lock.
When the vehicle is in motion, a message will appear on the multi-function display in the instrument panel if the lid is not closed properly.
Cabriolet only:
fPress pull-button B. Engine compartment lid (convertible-top compartment lid) closes automatically.
Malfunctions when Opening and
Closing
Emergency operation of luggage compartment lid
If the vehicle battery is discharged, the luggage compartment lid can be opened only by connecting an external electrical power source.fPlease see the chapter “EMERGENCY UNLOCKING OF LUGGAGE COMPARTMENT LID” on page 270.
Only one door is unlocked
The setting for locking and unlocking the doors has been changed on the multi-function display in the instrument panel. fPlease see the chapter “SETTING DOOR UNLOCKING” on page 122.
You can open both doors irrespective of the selected setting.fPress button on the key twice within 5 seconds.
14_991_Turbo_21.book Seite 26 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 27
The vehicle cannot be unlocked
Remote control of the car key may – fail due to a fault,– due to a flat key battery,– not function correctly due to radio waves (also radio contact between remote control and vehicle in the case of Porsche Entry & Drive).
If the vehicle cannot be opened, then: 1. Place the car key at the outside edge of the windshield on the passenger’s side and, at the same time, press button ( illustration).
If the vehicle still cannot be opened, then: 2. Remove the emergency key from the car key. Please see the chapter “EMERGENCY KEY” on page 17.
3. Unlock and open the driver’s door with the emergency key.For this purpose, lift and hold the door handle.Insert the emergency key in the door lock, turn 90° anti-clockwise and remove the emergency key again.4. Release the door handle and open the door by pulling the door handle again.5. Switch on the ignition within 15 seconds to prevent the alarm system from triggering.Further procedure for vehicles with Porsche Entry & Drive:If the ignition cannot be switched on or if the engine will not start, the message “ Key not found or key fault Change key position ” will appear on the multi-function display.6. Turn control unit back to ignition lock position 0. 7. Try to start the engine again. If the engine will not start, the message ““ Key not found or key fault Change key position ” will appear again. The message “ Operating device: turn left, pull off, insert key ” appears after approx. 1 second.8. Turn control unit back to ignition lock position 0 and remove it from the ignition lock. Switch on the ignition using the ignition key (not the emergency key).
Switching off operational readiness (for vehicles with Porsche Entry & Drive)
Operational readiness of Porsche Entry & Drive is switched off after 96 hours for the driver’s door and after 36 hours for the passenger's door, if the vehicle is not unlocked within this time.1. Pull the door handle once to activate the system again.2. Pull the door handle again to open the door.
14_991_Turbo_21.book Seite 27 Mittwoch, 9. April 2014 2:19 14

28 Opening and Locking
Emergency operation – unlocking the ignition key/control unit
If the vehicle battery is discharged, the ignition key can be removed only if the emergency operation is performed.
Emergency operation must also be performed in order to remove the control unit from the ignition lock on vehicles with Porsche Entry & Drive.1. Grasp the fuse box cover on the driver’s side at the finger hole and pull it off.2. Unclip metal hook A on the inside of the fuse box cover.
3. Use metal hook A to remove the plastic cover B from the ignition lock. Make sure not to lose the plastic cover B.
4. Turn control unit/ignition key to ignition lock position 0 (initial position). 5. Press metal hook A into opening C. You will hear an unlocking noise.6. Remove the control unit/ignition key in initial position 0. 7. Re-fit the plastic cover B.
14_991_Turbo_21.book Seite 28 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 29
Door lock under door handle (driver‘s side)
The vehicle cannot be locked
This is recognizable by the fact that the emergency flasher does not flash and there is no locking noise.
The remote control of the key may – fail due to a fault,– due to a flat key battery,– not function correctly due to radio waves(e.g. mobile phone) in the vicinity of the vehicle (even radio contact between remote control and vehicle in the case of Porsche Entry & Drive).
Emergency locking if the central locking system has failed
If the vehicle cannot be locked, then: 1. Remove the emergency key from the car key. Please see the chapter “EMERGENCY KEY” on page 17.2. Open the driver’s door.
3. Lift the door handle on the driver’s door ( illustration). Insert the emergency key in the door lock, turn 90° clockwise and remove the emergency key again.Successful locking is indicated by the hazard warning lights flashing twice.4. Release the door handle and shut the door. The driver’s door is now locked.5. To use the emergency locking function on the passenger’s door , insert the emergency key into the door lock on the driver’s door again, turn 90° clockwise and remove the emergency key again.The passenger’s door is now locked.
Information
Emergency locking of the passenger’s door is not possible if the central locking system is defective.
Information
If the central locking system is defective, operating the lock cylinder in the driver’s door will lock all functioning locking elements of the central locking system.fHave faults in the central locking system repaired by an authorized Porsche dealer.
Emergency key
Removing emergency key
1. Push the release button to the side. 2. Pull out the key.
Insert emergency key
fPush in the key until the release button engages audibly.
Information
Different vehicle settings are stored on the respective key when the vehicle is locked, provided the vehicle is fitted with the relevant equipment.
14_991_Turbo_21.book Seite 29 Mittwoch, 9. April 2014 2:19 14

Windows, Sunroof and Cabriolet 65
Closing the roof
First setting – manual operationfPull and hold button C in the first setting until the desired position is reached.
Second setting – one-touch operationfBriefly pull button C to the second setting. The roof closes automatically.
The process can be interrupted by pulling button C again.
Opening the roll-up sunblind
First setting – manual operationfPull and hold button A in the first setting until the desired position is reached.
Second setting – one-touch operationfBriefly pull button A to the second setting. The sunblind opens automatically to the end position.
The process can be interrupted by pressing button A again.
Closing the roll-up sunblind
First setting – manual operationfPress and hold button A in the first setting until the desired position is reached.
Second setting – one-touch operationfBriefly press button A to the second setting. The sunblind closes automatically to the end position.
The process can be interrupted by pressing button A again.
Information
If the sunroof is partly or fully open, the sunblind can only be closed as far as the front edge of the sunroof.
If the sunblind is closed, it will be opened (pulled along) automatically when the sunroof is opened.
Warning message on multi-function display
If there is a fault in the sunroof the warning “ Close sunroof completely” appears on the multi- function display.fClose sunroof with button C. Have the fault corrected by an authorized Porsche dealer at the next opportunity.
Emergency closing of sunroof
Emergency closing after repeated intervention from the force limiter
If the closing operation of the roof is impeded by an obstruction, it can be closed manually with increased force.
To perform emergency closing: 1. Remove the obstruction. 2. Pull and hold button C in the first setting until the roof closes and stops in the closed position.Repeat closing operation if necessary
Emergency operation if roof drive mechanism fails
If the roof drive mechanism is defective, it can be closed manually using the hexagon key from the tool kit.fBefore using emergency operation, check that the fuse is intact.
For information on changing fuses:fPlease see the chapter “CHANGING FUSES” on page 267.
14_991_Turbo_21.book Seite 65 Mittwoch, 9. April 2014 2:19 14

66 Windows, Sunroof and Cabriolet
1.Carefully lever off the cap from the roof liner using a screwdriver, for example.2. Take the hexagon key out of the tool kit in the luggage compartment.
For information on the tool kit:fPlease see the chapter “TOOLS” on page 198.
3. Insert the hexagon key all the way into the opening.4. Applying continuous upward pressure, turn the key clockwise until the roof is fully closed.5. Remove the key. 6. Refit the cap. 7. Stow the key in the tool kit.fHave the fault corrected at an authorized Porsche dealer.
Storing end position of the sunroof
The end positions of the roof are lost after disconnection/connection of the vehicle battery, if the vehicle battery is exhausted or after jump lead starting, after emergency operation or after changing the fuse for the roof.
The roof closes with its full closing force when storing the end position.fEnsure that nobody is injured when closing the roof.
The vehicle must be stationary in order to store the end position of the roof.1. Switch on ignition. 2. Pull and hold button C in the first setting until the roof closes and stops in the closed position.The process for storing the end position begins after approximately 10 seconds. The roof now opens and closes once automatically. Storage is now complete.If this process is not executed, please perform the following procedure:Pull and hold button C in the first setting until the roof closes fully and stops. If necessary, repeat the closing operation until the roof has stopped moving completely.The process takes a maximum of 15 seconds.Start the storing process again if the button is released before the roof has stopped moving completely.
Storing the end positionWARNINGh
14_991_Turbo_21.book Seite 66 Mittwoch, 9. April 2014 2:19 14